Compression Engineer III

SPITZER INDUSTRIES

Houston (TX)

On-site

USD 120,000 - 180,000

Full time

16 hours ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

SPITZER INDUSTRIES is seeking a Compression Engineer III in Houston, TX. This role focuses on engineering support and design of compressor packages, performing performance analyses, ASME code calculations, and equipment data sheet preparation.

You will collaborate with project stakeholders to define scope, fabricate drawings, and develop BOMs for capital projects. The ideal candidate has 10–15 years in mechanical/process engineering for oil & gas compression, with strong knowledge of natural gas

Qualifications

  • BS in Chemical, Mechanical or equivalent Engineering.
  • 10-15 years of Mechanical, Package, or Process Engineering in oil and gas compression with a minimum 10 years in Compressor Packaging.
  • The ability to complete engineering and design of new reciprocating gas compressors; field experience is a plus.
  • Command of general oil and gas process industry principles and calculations.
  • Solid experience with rotating equipment, heat transfer and line hydraulics.
  • Specific working knowledge of natural gas compression is required.
  • Strong written and verbal communication across engineering disciplines and levels.
  • Understanding of ASME Section VIII and implications in design; Compress software is a plus.
  • Understanding of sound project and process engineering management practices.
  • Proficient with computer modeling software (BR&E Promax preferred).
  • Proficient with OEM performance software (Ariel, Dresser Rand, Caterpillar, Waukesha).
  • MS Office (Outlook, Word, Excel) proficiency.
  • Strong interpersonal skills; self-starter; able to handle multiple tasks.

Responsibilities

  • Provide engineering support and design of compressor packages; define scope and fabrication estimates.
  • Perform compressor performance analysis, process design and ASME code calculations.
  • Develop equipment data sheets and interpret project specifications.
  • Create assembly and fabrication drawings in collaboration with the design team.
  • Develop bill of materials including valves, PSVs, and instrumentation.
  • Report technical findings to support decision making; interface with PMs, fabrication teams and vendors.
  • Assist estimating with technical evaluations for new opportunities.
  • Maintain proficiency in software for compressor performance and process simulation.

Skills

Compressor packaging
ASME VIII
Project management
Engineering design
Thermodynamics
Heat transfer
Promax
Compress Software
Microsoft Excel
Gas compression

Education

B.S. in Chemical/Mechanical Eng

Tools

Promax BR&E
OEM performance software (Ariel, Dresser Rand, Caterpillar, Waukesha)

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Engineering Full time salaried exempt Indirect Houston, TX, US

The role of Compression Engineer III is responsible for engineering support and design by performing a variety of tasks including, but not limited to, compressor performance analysis, process design, ASME code calculations, technical completion of equipment data sheets, and interpretation of project specifications. The candidate will perform engineering and design of compressor packages by providing project management with a clearly defined project scope of work for fabrication. This project scope of work and estimate will be used to execute current opportunities.

  • Uses a broad range of process, mechanical, and instrumentation engineering capabilities to evaluate, develop, model, and optimize ideas in support of capital projects and operational issues.
  • Evaluates mechanical, electromechanical, and process systems and products by applying previous experience as well as principles of mechanics, thermodynamics, hydraulics, heat transfer, and materials.
  • Develops natural gas compressors and associated products by studying customer requirements while considering manufacturing and assembly methods and materials.
  • Assures product quality by monitoring product and system capabilities; confirming fabrication, assembly, and installation processes.
  • Confer with project stakeholders, operations, management, vendors and various subject matter experts to develop a proposed project scope definition and insure the validity of the design through its execution.
  • Work closely with design team to develop all assembly and fabrication drawings.
  • Develop bill of materials, including but not limited to valves, PSVs, and instrumentation.
  • Professionally report technical findings and insight to aid the collaborative decision-making process.
  • Interfaces with project managers, fabrication teams and outside providers of engineering services to support work effort as needed.
  • May support estimating functions by performing engineering evaluations and technical feasibility related to new business development opportunities.
  • Continually develops proficiency in software packages such as those used for compressor performance, process simulation, and ASME code calculations.

Qualifications

The successful candidate will meet the following qualifications:

  • BS in Chemical, Mechanical or equivalent Engineering.
  • 10-15 years of Mechanical, Package, or Process Engineering in oil and gas compression with a minimum 10 years of experience in Compressor Packaging required.
  • The ability to complete engineering and design of new reciprocating gas compressors, field experience with gas compressors is a plus.
  • Command of general oil and gas process industry principles and calculations.
  • Solid operations and/or design experience with a variety of forms of rotating equipment, heat transfer and line hydraulics.
  • Specific working knowledge of natural gas compression is required.
  • Strong written and verbal communication skills involving a very broad array of engineering disciplines and organizational levels.
  • Understanding of ASME Section VIII and its implications in design is required. Working knowledge of Compress Software is a plus.
  • Understanding of sound project and process engineering management practices.
  • Proficient with computer modeling software. (BR&E Promax is preferred)
  • Proficient with OEM (Ariel, Dresser Rand, Caterpillar, Waukesha, etc) performance software.
  • Working knowledge and experience in Microsoft software (Outlook, Word, Excel, etc.)
  • Strong interpersonal skills with the ability to work alone or as a part of a team.
  • Self-starter with the ability to manage multiple tasks with limited supervision.
  • High level of organization and understanding of document control.

Compression Engineer III

The role of Compression Engineer III is responsible for engineering support and design by performing a variety of tasks including, but not limited to, compressor performance analysis, process design, ASME code calculations, technical completion of equipment data sheets, and interpretation of project specifications. The candidate will perform engineering and design of compressor packages by providing project management with a clearly defined project scope of work for fabrication. This project scope of work and estimate will be used to execute current opportunities.

  • Uses a broad range of process, mechanical, and instrumentation engineering capabilities to evaluate, develop, model, and optimize ideas in support of capital projects and operational issues.
  • Evaluates mechanical, electromechanical, and process systems and products by applying previous experience as well as principles of mechanics, thermodynamics, hydraulics, heat transfer, and materials.
  • Develops natural gas compressors and associated products by studying customer requirements while considering manufacturing and assembly methods and materials.
  • Assures product quality by monitoring product and system capabilities; confirming fabrication, assembly, and installation processes.
  • Confer with project stakeholders, operations, management, vendors and various subject matter experts to develop a proposed project scope definition and insure the validity of the design through its execution.
  • Work closely with design team to develop all assembly and fabrication drawings.
  • Develop bill of materials, including but not limited to valves, PSVs, and instrumentation.
  • Professionally report technical findings and insight to aid the collaborative decision-making process.
  • Interfaces with project managers, fabrication teams and outside providers of engineering services to support work effort as needed.
  • May support estimating functions by performing engineering evaluations and technical feasibility related to new business development opportunities.
  • Continually develops proficiency in software packages such as those used for compressor performance, process simulation, and ASME code calculations.

Qualifications

The successful candidate will meet the following qualifications:

  • BS in Chemical, Mechanical or equivalent Engineering.
  • 10-15 years of Mechanical, Package, or Process Engineering in oil and gas compression with a minimum 10 years of experience in Compressor Packaging required.
  • The ability to complete engineering and design of new reciprocating gas compressors, field experience with gas compressors is a plus.
  • Command of general oil and gas process industry principles and calculations.
  • Solid operations and/or design experience with a variety of forms of rotating equipment, heat transfer and line hydraulics.
  • Specific working knowledge of natural gas compression is required.
  • Strong written and verbal communication skills involving a very broad array of engineering disciplines and organizational levels.
  • Understanding of ASME Section VIII and its implications in design is required. Working knowledge of Compress Software is a plus.
  • Understanding of sound project and process engineering management practices.
  • Proficient with computer modeling software. (BR&E Promax is preferred)
  • Proficient with OEM (Ariel, Dresser Rand, Caterpillar, Waukesha, etc) performance software.
  • Working knowledge and experience in Microsoft software (Outlook, Word, Excel, etc.)
  • Strong interpersonal skills with the ability to work alone or as a part of a team.
  • Self-starter with the ability to manage multiple tasks with limited supervision.
  • High level of organization and understanding of document control.

Limited travel, however, some project commissioning may be required (

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Compression Engineer III
Compression Engineer III

ADP, Inc. • Houston (TX)

On-site
USD 120,000 - 180,000
Compression Engineer III
Compression Engineer III

Spitzer Industries, Inc. • Houston (TX)

On-site
USD 120,000 - 160,000
Applications Engineer - Power
Applications Engineer - Power

PETROLINK ENERGY LLC • Houston (TX)

On-site
USD 90,000 - 130,000
Performance bonus
401(k) with 5% company contribution
Medical/dental/vision/Life insurance
Engineer I/Engineer II/Sr Engineer/Sr Engineer II (Compression Services)
Engineer I/Engineer II/Sr Engineer/Sr Engineer II (Compression Services)

NV Energy • Bridgeport (WV)

On-site
USD 70,000 - 110,000
Relocation assistance
Rotating Equipment Specialist
Rotating Equipment Specialist

Targa Resources • Midland (TX)

On-site
USD 110,000 - 160,000
Mechanical Project Engineer
Mechanical Project Engineer

Power Systems Hanwha • Florida

On-site
USD 80,000 - 100,000
Millwright/Reciprocating Compressor Mechanic
Millwright/Reciprocating Compressor Mechanic

Texas Compression, LLC • Houston (TX)

On-site
USD 34,000 - 55,000
Overtime opportunities
Per diem on qualifying projects
Project-based travel opportunities
+1
Field Service Technician
Field Service Technician

Distro • Williston (ND)

On-site
USD 60,000 - 90,000
Field Service Technician I/II/Sr
Field Service Technician I/II/Sr

Kern River Gas Transmission Company • Carlsbad (NM)

On-site
USD 60,000 - 85,000
Staff Engineer
Staff Engineer

Hirenexus • San Francisco (CA)

On-site
USD 180,000 - 280,000