Compression Engineer III

Spitzer Industries, Inc.

Houston (TX)

On-site

USD 120,000 - 160,000

Full time

32 hours ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Spitzer Industries, Inc. is seeking a Compression Engineer III in Houston, TX to provide engineering support and design for compressor packages.

You will manage scope, perform compressor performance analyses, ASME code calculations, and develop equipment data sheets for fabrication, coordinating with project stakeholders. Responsibilities include evaluating mechanical and process systems, developing BOMs, and reporting technical findings to support decision making.

Qualifications

  • BS in Chemical, Mechanical or equivalent Engineering.
  • 10-15 years of Mechanical, Package, or Process Engineering in oil and gas compression with a minimum 10 years of experience in Compressor Packaging.
  • Understanding of ASME Section VIII and its implications in design is required.

Responsibilities

  • Evaluate, develop, model, and optimize ideas for capital projects and operations.
  • Evaluate mechanical, electromechanical, and process systems using mechanics, thermodynamics, hydraulics, heat transfer, and materials.

Skills

Compressor design
Project management
ASME calculations
Thermodynamics
Rotating equipment knowledge

Education

BS in Chemical, Mechanical or equivalent Engineering

Tools

Promax
Compress Software
MS Office

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Engineering Full time salaried exempt Indirect Houston, TX, US

The role of Compression Engineer III is responsible for engineering support and design by performing a variety of tasks including, but not limited to, compressor performance analysis, process design, ASME code calculations, technical completion of equipment data sheets, and interpretation of project specifications. The candidate will perform engineering and design of compressor packages by providing project management with a clearly defined project scope of work for fabrication. This project scope of work and estimate will be used to execute current opportunities.

  • Uses a broad range of process, mechanical, and instrumentation engineering capabilities to evaluate, develop, model, and optimize ideas in support of capital projects and operational issues.
  • Evaluates mechanical, electromechanical, and process systems and products by applying previous experience as well as principles of mechanics, thermodynamics, hydraulics, heat transfer, and materials.
  • Develops natural gas compressors and associated products by studying customer requirements while considering manufacturing and assembly methods and materials.
  • Assures product quality by monitoring product and system capabilities; confirming fabrication, assembly, and installation processes.
  • Confer with project stakeholders, operations, management, vendors and various subject matter experts to develop a proposed project scope definition and insure the validity of the design through its execution.
  • Work closely with design team to develop all assembly and fabrication drawings.
  • Develop bill of materials, including but not limited to valves, PSVs, and instrumentation.
  • Professionally report technical findings and insight to aid the collaborative decision-making process.
  • Interfaces with project managers, fabrication teams and outside providers of engineering services to support work effort as needed.
  • May support estimating functions by performing engineering evaluations and technical feasibility related to new business development opportunities.
  • Continually develops proficiency in software packages such as those used for compressor performance, process simulation, and ASME code calculations.
Qualifications

The successful candidate will meet the following qualifications:

  • BS in Chemical, Mechanical or equivalent Engineering.
  • 10-15 years of Mechanical, Package, or Process Engineering in oil and gas compression with a minimum 10 years of experience in Compressor Packaging required.
  • The ability to complete engineering and design of new reciprocating gas compressors, field experience with gas compressors is a plus.
  • Command of general oil and gas process industry principles and calculations.
  • Solid operations and/or design experience with a variety of forms of rotating equipment, heat transfer and line hydraulics.
  • Specific working knowledge of natural gas compression is required.
  • Strong written and verbal communication skills involving a very broad array of engineering disciplines and organizational levels.
  • Understanding of ASME Section VIII and its implications in design is required. Working knowledge of Compress Software is a plus.
  • Understanding of sound project and process engineering management practices.
  • Proficient with computer modeling software. (BR&E Promax is preferred)
  • Proficient with OEM (Ariel, Dresser Rand, Caterpillar, Waukesha, etc) performance software.
  • Working knowledge and experience in Microsoft software (Outlook, Word, Excel, etc.)
  • Strong interpersonal skills with the ability to work alone or as a part of a team.
  • Self-starter with the ability to manage multiple tasks with limited supervision.
  • High level of organization and understanding of document control.
Compression Engineer III

The role of Compression Engineer III is responsible for engineering support and design by performing a variety of tasks including, but not limited to, compressor performance analysis, process design, ASME code calculations, technical completion of equipment data sheets, and interpretation of project specifications. The candidate will perform engineering and design of compressor packages by providing project management with a clearly defined project scope of work for fabrication. This project scope of work and estimate will be used to execute current opportunities.

  • Uses a broad range of process, mechanical, and instrumentation engineering capabilities to evaluate, develop, model, and optimize ideas in support of capital projects and operational issues.
  • Evaluates mechanical, electromechanical, and process systems and products by applying previous experience as well as principles of mechanics, thermodynamics, hydraulics, heat transfer, and materials.
  • Develops natural gas compressors and associated products by studying customer requirements while considering manufacturing and assembly methods and materials.
  • Assures product quality by monitoring product and system capabilities; confirming fabrication, assembly, and installation processes.
  • Confer with project stakeholders, operations, management, vendors and various subject matter experts to develop a proposed project scope definition and insure the validity of the design through its execution.
  • Work closely with design team to develop all assembly and fabrication drawings.
  • Develop bill of materials, including but not limited to valves, PSVs, and instrumentation.
  • Professionally report technical findings and insight to aid the collaborative decision-making process.
  • Interfaces with project managers, fabrication teams and outside providers of engineering services to support work effort as needed.
  • May support estimating functions by performing engineering evaluations and technical feasibility related to new business development opportunities.
  • Continually develops proficiency in software packages such as those used for compressor performance, process simulation, and ASME code calculations.
Qualifications

The successful candidate will meet the following qualifications:

  • BS in Chemical, Mechanical or equivalent Engineering.
  • 10-15 years of Mechanical, Package, or Process Engineering in oil and gas compression with a minimum 10 years of experience in Compressor Packaging required.
  • The ability to complete engineering and design of new reciprocating gas compressors, field experience with gas compressors is a plus.
  • Command of general oil and gas process industry principles and calculations.
  • Solid operations and/or design experience with a variety of forms of rotating equipment, heat transfer and line hydraulics.
  • Specific working knowledge of natural gas compression is required.
  • Strong written and verbal communication skills involving a very broad array of engineering disciplines and organizational levels.
  • Understanding of ASME Section VIII and its implications in design is required. Working knowledge of Compress Software is a plus.
  • Understanding of sound project and process engineering management practices.
  • Proficient with computer modeling software. (BR&E Promax is preferred)
  • Proficient with OEM (Ariel, Dresser Rand, Caterpillar, Waukesha, etc) performance software.
  • Working knowledge and experience in Microsoft software (Outlook, Word, Excel, etc.)
  • Strong interpersonal skills with the ability to work alone or as a part of a team.
  • Self-starter with the ability to manage multiple tasks with limited supervision.
  • High level of organization and understanding of document control.

Limited travel, however, some project commissioning may be required (

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Compression Engineer III
Compression Engineer III

SPITZER INDUSTRIES • Houston (TX)

On-site
USD 120,000 - 180,000
Compression Engineer III
Compression Engineer III

ADP, Inc. • Houston (TX)

On-site
USD 120,000 - 180,000
Applications Engineer - Power
Applications Engineer - Power

PETROLINK ENERGY LLC • Houston (TX)

On-site
USD 90,000 - 130,000
Performance bonus
401(k) with 5% company contribution
Medical/dental/vision/Life insurance
Engineer I/Engineer II/Sr Engineer/Sr Engineer II (Compression Services)
Engineer I/Engineer II/Sr Engineer/Sr Engineer II (Compression Services)

NV Energy • Bridgeport (WV)

On-site
USD 70,000 - 110,000
Relocation assistance
Rotating Equipment Specialist
Rotating Equipment Specialist

Targa Resources • Midland (TX)

On-site
USD 110,000 - 160,000
Senior Mechanical Engineer-Compressors/Compression Systems
Senior Mechanical Engineer-Compressors/Compression Systems

Jobot • Fountain Valley (CA)

Hybrid
USD 90,000 - 140,000
Mechanical Project Engineer
Mechanical Project Engineer

Power Systems Hanwha • Florida

On-site
USD 80,000 - 100,000
Intern - Engineering USAC
Intern - Engineering USAC

USA Compression • Dallas (TX)

On-site
USD 28,000 - 34,000
Engineer - Midland Basin Reliability
Engineer - Midland Basin Reliability

Energy Transfer • Midland (TX)

On-site
USD 110,000 - 140,000
Mechanical Project Engineer — Field/Remote IGT Support
Mechanical Project Engineer — Field/Remote IGT Support

Power Systems Hanwha • Florida

On-site
USD 80,000 - 100,000