Composite Materials & Process Engineering Technician

Joby Aviation Inc

Dayton (OH)

On-site

USD 48,000 - 58,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Joby Aviation Inc in Dayton, Ohio, is hiring a Composite M&P Engineering Technician to support propeller blade process development for eVTOL certification and production. This hands-on role bridges engineering and manufacturing, requiring fabricating composites on the shop floor and coordinating with technicians and engineers.

The successful candidate will read drawings, develop and optimize processes (RTM, dry layup, vacuum bagging), and maintain SOPs and process specs.

Qualifications

  • Minimum 6+ years of hands-on industry experience.
  • Hands-on composite fabrication experience.
  • Familiar with composite processes such as dry fiber layup, prepreg layup, vacuum bagging, RTM, and resin infusion.
  • Ability to read engineering drawings, work instructions, and process specifications.
  • Strong attention to detail and commitment to workmanship quality.
  • Problem-solving mindset with willingness to work on the shop floor.
  • Proficiency in MS Office Suite.

Responsibilities

  • Develop and optimize composite manufacturing processes for propeller blade fabrication (dry layup, RTM, vacuum bagging, curing, demolding, post-cure).
  • Support RTM process development using injection equipment and mold-fill studies.
  • Perform hands-on composite fabrication in the blade development cell with production technicians.
  • Execute laser-projected layup operations using lamination tables.
  • Fabricate batch acceptance test panels for material qualification and process validation.
  • Develop and maintain SOPs, MWIs, and process specs for blade manufacturing.
  • Interpret engineering drawings and process specs for laminate and bonded structures.
  • Record and analyze process data; document non-conformances and support RCCA.
  • Prepare and maintain molds, tooling, fixtures for blade fabrication.
  • Maintain a clean, safe workspace per Joby safety and OSHA.

Skills

Hands-on composite fabrication
Read engineering drawings
Attention to detail
Problem-solving
MS Office proficiency
Shop floor collaboration

Education

B.S. in Aerospace, Materials Science, Mechanical Engineering, or related field

Tools

Virtek laser
Aligned Vision
ION ERP/MES
3DEXPERIENCE CATIA
SolidWorks

Job description

Imagine a piloted air taxi that takes off vertically, then quietly carries you and your fellow passengers over the congested city streets below, enabling you to spend more time with the people and places that matter most. At Joby, we've been working to make that dream a reality since 2009 and we're now in the final stages of certifying our aircraft with the FAA. With plans to launch our aircraft in the US and Dubai, we're now scaling manufacturing and preparing for the launch of our commercial service.

Overview

Working as a Composite M&P Engineering Technician at our Dayton, Ohio facility (JMO), you will support propeller blade process development activities leading to the certification and production of eVTOL aircraft. The role requires hands-on composite fabrication experience and a strong desire to work directly on the shop floor. The ideal candidate is a highly skilled engineering technician who thrives at the intersection of fabrication and process development, bridging the gap between engineering and manufacturing, and possesses the ability to work with minimal supervision within a small, focused team.

Responsibilities
  • Develop and optimize composite manufacturing processes for propeller blade fabrication, including dry fiber layup, resin transfer molding (RTM), vacuum bagging, curing, demolding, and post-cure operations
  • Support RTM process development using injection equipment, including resin system evaluation, injection parameter development, and mold fill studies
  • Perform hands‑on composite fabrication in the blade development cell, working alongside production technicians
  • Execute laser‑projected layup operations using lamination tables and blade truss structures
  • Fabricate batch acceptance test panels in support of material qualification and process validation activities
  • Develop and maintain SOPs, Manufacturing Work Instructions (MWIs), and process specifications for blade manufacturing operations
  • Interpret and work with engineering drawings, work instructions, and process specifications for composite laminate and bonded structures
  • Record and analyze process data; document and communicate non‑conformances and support root cause and corrective action (RCCA) activities
  • Prepare and maintain molds, tooling, and fixtures associated with blade fabrication and development operations
  • Maintain a clean, safe, and organized workspace, following all Joby safety procedures and OSHA regulations
Required
  • Minimum 6+ years of relevant hands‑on industry experience
  • Demonstrated hands‑on composite fabrication experience
  • Familiarity with composite manufacturing processes such as dry fiber layup, prepreg layup, vacuum bagging, resin infusion, or RTM
  • Ability to read and work from engineering drawings, work instructions, and process specifications
  • Strong attention to detail and critical thinking skills with a commitment to workmanship quality
  • Problem‑solving mindset with a willingness to work on the shop floor and collaborate effectively with technicians and engineers
  • Proficiency in MS Office Suite and general computer skills
Desired
  • B.S. in Aerospace, Materials Science, Mechanical Engineering, or related engineering discipline
  • Experience with RTM or liquid composite molding processes, specifically injection‑based systems
  • Experience with laser projection systems for composite layup (e.g., Virtek, Aligned Vision)
  • Familiarity with propeller or rotating composite structure fabrication and metal‑to‑composite bonding
  • Experience developing or following aerospace process specifications and work instructions
  • Familiarity with aerospace quality systems, NCR processes, and FAA‑regulated manufacturing environments
  • Experience with ERP/MES systems for production tracking (e.g., ION)
  • Proficiency in 3DEXPERIENCE CATIA (3DX) or SolidWorks (Engineer track)
Additional Information

Compensation at Joby is a combination of base pay and Restricted Stock Units (RSUs). The target base pay for this position is $35-42/hr. The compensation package will be determined by job‑related knowledge, skills, and experience.

Joby also offers a comprehensive benefits package, including paid time off, healthcare benefits, a 401(k) plan with a company match, an employee stock purchase plan (ESPP), short‑term and long‑term disability coverage, life insurance, and more.

Joby is an Equal Opportunity Employer.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Senior Composite Materials & Process Engineer
Senior Composite Materials & Process Engineer

Joby Aviation Inc • California

On-site
USD 114,000 - 194,000
eVTOL Composite M&P Technician - Blade Process & Manufacturing
eVTOL Composite M&P Technician - Blade Process & Manufacturing

Joby Aviation Inc • Dayton (OH)

On-site
USD 48,000 - 58,000
Senior Airframe Assembly Manufacturing Engineer
Senior Airframe Assembly Manufacturing Engineer

Frontdoor Defense • California

On-site
USD 129,000 - 221,000
Senior 5-Axis CNC Router Machinist – Lead & Mentor
Senior 5-Axis CNC Router Machinist – Lead & Mentor

Joby Aviation Inc • California

On-site
USD 50,971 - 66,124
Comprehensive benefits package
Paid time off
Healthcare benefits
+2
Staff MRB Stress Engineer
Staff MRB Stress Engineer

Joby Aviation Inc • California

On-site
USD 185,000 - 255,000
Aircraft Maintenance Technician
Aircraft Maintenance Technician

Frontdoor Defense • California

On-site
USD 55,000 - 72,000
Healthcare benefits
401(k) with company match
RSUs/Stock options
+1
GCS & Flight Test Instrumentation Technician
GCS & Flight Test Instrumentation Technician

Joby Aviation Inc • California

On-site
USD 50,000 - 72,000
Propulsion Mechanical Engineer
Propulsion Mechanical Engineer

Joby Aviation Inc • San Carlos (CA)

On-site
USD 98,200 - 164,600
401(k) plan with company match
Employee stock purchase plan
Comprehensive healthcare benefits
+1
GCS & Flight Test Instrumentation Technician
GCS & Flight Test Instrumentation Technician

Joby Aviation Inc • California

On-site
USD 50,000 - 72,000
Flight Test Instrumentation Engineer
Flight Test Instrumentation Engineer

Joby Aviation Inc • California

On-site
USD 98,000 - 167,000