CNC Programmer

Tri Tool; Rancho Cordova (CA); Hybrid; USD 70,000 - 95,000; Full time

Job summary

Tri Tool in Rancho Cordova, CA is seeking a skilled CNC Programmer to develop programs for CNC mills and lathes using MasterCAM, and to collaborate with engineers and machinists to optimize production.

You will create setup sheets, maintain tooling libraries, update programs for revisions, read blueprints, and ensure parts print efficiently while upholding safety and quality standards.

Qualifications

• Education: High School diploma or GED required; technical training preferred.
• Five+ years programming CNC mills and lathes required; 5–10 years setup/operation of 3–5 axis centers.
• Experience with MasterCam or similar CAD/CAM software; knowledge of G-code editing.

Responsibilities

• Develop CNC programs for mills and lathes using MasterCAM.
• Develop and maintain tooling, fixturing, and toolpath libraries.
• Create and standardize setup sheets for programmed parts.
• Update CAM programs for engineering revisions and changes.
• Read and interpret blueprints, schematics, and technical manuals.
• Work with machinists to ensure parts print efficiently and meet quality standards.
• Inspect work, document results, and report issues to supervisors.

Skills

CNC programming

Mastercam

Problem solving

Attention to detail

Independent work

Time management

Communication

Team collaboration

Stress management

Education

High School diploma

GED

Technical/on-the-job training

Tools

Mastercam 2022

CAD/CAM software

Fanuc Macro B

Haas controls

Mazatrol controls

Job description

Description

The CNC Programmer will perform a variety of duties in support of Manufacturing and develops CNC programs for production on CNC vertical mills, horizontal mills, and CNC lathes. This position interacts with engineers, machinists, and other production employees in order to develop efficient production processes. The CNC Programmer is responsible for tooling/fixture selection, toolpath development, and creating setup sheets to provide clear instructions to machinists and troubleshooting and correcting problems that may arise during production.

Job Duties and Responsibilities

Perform all duties below in alignment with Tri Tool's Imperatives

• Use computer models and prints to develop programs for CNC machining centers using MasterCAM.
• Develop and maintain accurate and up-to-date tooling, fixturing, and toolpath libraries with CAM software.
• Ensure that programmed parts are running efficiently and can print. Work with machinists as needed to correct quality issues that arise.
• Create and standardize setup sheets for the programmed parts.
• Update CAM programs as needed to reflect engineering revision changes on parts.
• Work closely with the Shop Foreman, Shop Lead, and machinists to design, manufacture, and/or order fixturing and tooling.
• May be called upon to set up and operate machining equipment on an as-needed basis.
• Perform installation, repair, maintenance, and troubleshooting of trade-specific systems or equipment.
• Read and interpret blueprints, schematics, drawings, and technical manuals.
• Use hand tools, power tools, and specialized equipment safely and effectively.
• Follow all safety regulations, codes, and company policies.
• Inspect work for quality, accuracy, and compliance with industry standards.
• Identify and report material, equipment, or safety issues.
• Maintain tools, equipment, and a clean work area.
• Communicate progress, issues, and timelines with supervisors or clients.
• Complete required documentation, reports, and job records.
• Submit accurate hours worked on a daily basis, accounting for required breaks and meal periods.
• Work independently and productively while still keeping open communication with others.
• Delivers honest and reliable communication with all individuals with whom they interact.
• Effectively manage time to avoid backtracking and delay of tasks.
• Consistently contributes to a safe, professional, and positive work environment, abiding by Tri Tool Technologies' policies and procedures at all times.
• Regular attendance and timeliness.
• Perform other duties as assigned or otherwise identified

Skills

• Ability to develop processes from start to finish
• Possess reasoning and problem-solving skills, with emphasis on seeking solutions
• Must work with a high degree of accuracy
• Ability to exercise independent judgment and take initiative to accomplish directives with minimal supervision
• Be reliable, honest, and work well with others
• Exhibits strong organizational and planning abilities with a keen attention to detail.
• Contributes effectively as a collaborative team member
• Demonstrates a strategic, forward-thinking mindset
• Effective, accurate, and professional verbal and written communication with machinists, engineers, and managers
• Demonstrates strong social perceptiveness by recognizing others’ reactions, understanding their underlying causes, and responding appropriately
• Ability to modify work and communication style based on tasks and individuals involved
• Ability to maintain confidentiality at all times
• Ability to effectively handle stress and pressure consistent with the job duties and industry

Requirements

• Education
  • High School diploma OR GED required
  • Technical/other on-the-job training preferred
• Minimum of five (5) years of experience with programming CNC mills and CNC lathes required
• Five to ten (5-10) years of experience setting up/operating 3, 4, and 5-axis CNC mills and CNC lathes as well as multi-axis mill/turn machining centers
• Experience with MasterCam 2022 and/or similar CAD/CAM software preferred
• Experience with Fanuc Macro B, Haas, and/or Mazatrol controls preferred
• Knowledge of G-code programming and the ability to edit by hand as needed
• Proficient computer skills in programs such as Microsoft Office, Word, Excel and Internet
• Up-to-date practical knowledge of modern machining processes
• Must be able to pass a background screening