CNC Plasma Table Operator / Welder-Fabricator

Downtime Rebuild Equipment

Cincinnati (OH)

On-site

USD 34,000 - 48,000

Full time

8 days ago

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Downtime Rebuild Equipment in Cincinnati seeks an experienced Welder-Fabricator who can independently operate a CNC plasma table to produce finished parts. The role requires loading files, setting up material, and running cuts with attention to accuracy.

MIG, TIG and Stick welding are required as needed, and familiarity with blueprints is helpful though not mandatory. You will read drawings, verify materials, monitor cut quality, troubleshoot issues, and maintain a safe workspace while

Qualifications

  • Hands-on CNC plasma-table operation in fabrication/manufacturing.
  • Ability to read blueprints and technical drawings.
  • Experience with MIG/TIG/STICK welding as needed.
  • Ability to work independently and safely with attention to detail.

Responsibilities

  • Receive drawings and load into the CNC plasma table.
  • Verify part layout, material type, thickness, consumables and cut settings.
  • Load and position raw material on the plasma table.
  • Independently operate the table from setup through finished cut.
  • Monitor cut quality and adjust as needed.
  • Troubleshoot torch, nozzle, consumables, and cut quality.
  • Inspect finished parts for accuracy before fabrication and assembly.
  • Read blueprints and specifications.
  • Fabricate metal components from raw material, not just pre-cut pieces.
  • Perform MIG, TIG and STICK welding as needed.
  • Use grinders, saws, press brakes, measuring tools and other fabrication equipment.
  • Maintain a clean and safe work area and keep equipment in good condition.

Skills

CNC plasma-table operation
Blueprint reading
Independent work
Fabrication and welding

Tools

CNC Plasma Table
Torchmate
AutoCAD
SolidWorks
Calipers
Micrometers

Job description

OverviewDowntime Rebuild is hiring an experienced Welder-Fabricator who can independently operate a CNC plasma table in our Cincinnati shop.CNC plasma-table operation is the primary requirement for this position. This is not a training role for someone whose only experience is using a handheld plasma cutter or welding pieces that another employee has already prepared.The right person can receive a file from engineering, load it into the plasma table, set up the material and cut settings, run the job and produce finished parts. AutoCAD or SolidWorks experience is helpful but not required because our engineers create the drawings.Responsibilities- Receive drawing and production files from engineering and load them into the CNC plasma table’s software or controller.- Verify the part layout, material type, thickness, consumables and cut settings.- Load and position raw material on the plasma table.- Independently operate the table from setup through the completed cut.- Monitor cut quality and make necessary adjustments.- Perform basic torch, nozzle, consumable and cut-quality troubleshooting.- Inspect completed parts for accuracy before fabrication and assembly.- Read blueprints, technical drawings and specifications.- Fabricate metal components from raw material rather than only welding pre-cut pieces.- Perform MIG, TIG and stick welding as needed.- Use grinders, saws, press brakes, measuring tools and other fabrication equipment.- Maintain a clean and safe work area and keep equipment in good condition.Required Qualifications- Hands-on experience independently operating a CNC plasma table in a fabrication or manufacturing environment.- Ability to clearly explain the steps personally performed from receiving a file through producing finished cut parts.- Experience loading files, setting up material and cut parameters, operating the table and checking finished parts.- Metal fabrication and welding experience.- Ability to read blueprints and technical drawings.- Ability to use calipers, micrometers, tape measures and other measuring tools.- Strong attention to detail and commitment to producing quality work.- Ability to work independently and safely.Experience that does not qualify- Handheld or manual plasma-cutting experience without CNC plasma-table experience.- Only welding parts that another employee cut and prepared.- Watching or assisting another operator without independently setting up and running the table.- Experience that would require training on the basic operation of a CNC plasma table.Preferred Qualifications- Experience with Lincoln, Torchmate or similar CNC plasma tables.- AutoCAD or SolidWorks experience.- Experience with press brakes and other metal-fabrication equipment.Pay$25–$35 per hour, based on experienceYou should be proficient in:Welding Setups for ProductionMachines & technologies you'll use:CNC Mill (3-4 axis VMC) (Fanuc, Bridgeport)MIG WelderTIG WelderStick Welder3D Modeling (AutoCAD, Solidworks)2D Drawings (AutoCAD, Solidworks)Sit-Down Forklift (Hyster)Manual GrinderPallet Jack (Hyster)Power Tools (DeWalt, Makita, Milwaukee, Bosch, Ryobi, Hilti)Press Brake (Cincinnati)CNC Plasma Cutter (Torchmate)Overhead CraneMeasurement GaugesManual Plasma Cutter (Miller, Lincoln)Calipers and MicrometersForklifts (Hyster)Paint SprayerBand SawBelt Sander
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

CNC Plasma Table Operator & Fabrication Specialist
CNC Plasma Table Operator & Fabrication Specialist

Downtime Rebuild Equipment • Cincinnati (OH)

On-site
USD 34,000 - 48,000
CNC Plasma Operator
CNC Plasma Operator

TASSCO • Birmingham (AL)

On-site
USD 22,000 - 33,000
CNC Plasma Operator
CNC Plasma Operator

Laborup • Birmingham (AL)

On-site
USD 21,000 - 26,000
CNC Plasma Operator
CNC Plasma Operator

Specialty Fabricating Company • United States

On-site
USD 30,000 - 39,000
First Stop Health
Direct primary care
Financial advisors for retirement
+3
Plasma Table Operator
Plasma Table Operator

MIS Offshore • Mobile (AL)

On-site
USD 25,000 - 39,000
Plasma Table Operator
Plasma Table Operator

Marineandindustrial • Mobile (AL)

On-site
USD 42,000 - 66,000
CNC Plasma Operator
CNC Plasma Operator

SAC Incorporated • Clearfield (UT), Ogden (UT)

On-site
USD 34,000 - 52,000
Plasma Table Operator
Plasma Table Operator

Goponca • Ponca City (OK)

On-site
USD 25,000 - 39,000
Plasma Table Operator
Plasma Table Operator

Ponca City Development Authority • Ponca City (OK)

On-site
USD 30,000 - 42,000
CNC Plasma Table Operator / Metal Fabricator
CNC Plasma Table Operator / Metal Fabricator

Gibson Abrasive Equipment • Fishers (IN)

On-site
USD 25,000 - 39,000