CNC Lathe setup machinist/CNC Operator II 2nd shift

MW Components

Corona (CA)

On-site

USD 42,000 - 65,000

Full time

1 hour ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

MW Components is seeking an experienced CNC Operator I to perform full setup and operation of CNC machines, read blueprints, and ensure high-precision parts. You will inspect parts with precision tools, troubleshoot issues, and collaborate with engineers on process improvements.

The role requires attention to detail, strong time management, and safety compliance. You may train other operators and contribute to maintaining production records on a fast-paced shop floor.

Qualifications

  • Minimum two years of experience in CNC machine operation and setup.
  • Proficiency with basic CNC setup, offsets, tool changes.
  • Strong ability to read blueprints and GD&T symbols.
  • Skilled in using precision measurement tools (calipers, micrometers, height gauges, etc.).
  • Basic understanding of machining principles, speeds/feeds, and material properties.
  • Familiarity with safety standards in machining environments.

Responsibilities

  • Perform full setup and operation of CNC machines, including tooling, fixturing, offsets, and program adjustments.
  • Read and interpret complex blueprints, engineering drawings, and GD&T specifications.
  • Inspect parts using advanced measurement tools (micrometers, height gauges, bore gauges, CMM exposure a plus).
  • Troubleshoot machining issues such as tool wear, dimensional deviations, vibration, and surface finish defects.
  • Collaborate with programmers or engineers on process improvements and manufacturability solutions.
  • Train and mentor CNC Operator I personnel.
  • Maintain accurate production and quality records.
  • Perform preventive maintenance and ensure machines are kept in optimal working condition.
  • May work/train in other departments where needed.
  • Other duties as assigned/necessary.

Skills

CNC machine operation
Blueprint reading
GD&T interpretation
Precision measurement
Troubleshooting
Time management
Safety compliance
Reading part specifications
Detail-oriented
Communication skills

Education

Two years' experience in machine operation
Proficiency with CNC setup
Read blueprints and GD&T symbols

Job description

  • Perform full setup and operation of CNC machines, including tooling, fixturing, offsets, and program adjustments.
  • Read and interpret complex blueprints, engineering drawings, and GD&T specifications.
  • Inspect parts using advanced measurement tools (micrometers, height gauges, bore gauges, CMM exposure a plus).
  • Troubleshoot machining issues such as tool wear, dimensional deviations, vibration, and surface finish defects.
  • Collaborate with programmers or engineers on process improvements and manufacturability solutions.
  • Train and mentor CNC Operator I personnel.
  • Maintain accurate production and quality records.
  • Perform preventive maintenance and ensure machines are kept in optimal working condition.
  • May work/train in other departments where needed.
  • Other duties as assigned/necessary.
  • CNC machine operation and setup
  • Blueprint reading and GD&T interpretation
  • Precision measurement and quality inspection
  • Troubleshooting and problem-solving
  • Attention to detail and accuracy
  • Time management and efficiency
  • Safety awareness and compliance
  • Ability to read and interpret part specifications or blueprints.
  • Detail-oriented.
  • Good verbal and communication skills.
Essential Duties & Key Responsibilities
  • Perform full setup and operation of CNC machines, including tooling, fixturing, offsets, and program adjustments.
  • Read and interpret complex blueprints, engineering drawings, and GD&T specifications.
  • Inspect parts using advanced measurement tools (micrometers, height gauges, bore gauges, CMM exposure a plus).
  • Troubleshoot machining issues such as tool wear, dimensional deviations, vibration, and surface finish defects.
  • Collaborate with programmers or engineers on process improvements and manufacturability solutions.
  • Train and mentor CNC Operator I personnel.
  • Maintain accurate production and quality records.
  • Perform preventive maintenance and ensure machines are kept in optimal working condition.
  • May work/train in other departments where needed.
  • Other duties as assigned/necessary.
Skills & Competencies
  • CNC machine operation and setup
  • Blueprint reading and GD&T interpretation
  • Precision measurement and quality inspection
  • Troubleshooting and problem-solving
  • Attention to detail and accuracy
  • Time management and efficiency
  • Safety awareness and compliance
  • Ability to read and interpret part specifications or blueprints.
  • Detail-oriented.
  • Good verbal and communication skills.
Required
EDUCATION & EXPERIENCE
  • Minimum of two (2) years' experience in machine operation and setup.
  • Proficiency with basic CNC setup, offsets, and tool changes.
  • Strong ability to read blueprints and understand GD&T symbols.
  • Skilled in using precision measurement tools (calipers, micrometers, height gauges, etc.).
  • Basic understanding of machining principles, speeds/feeds, and material properties.
  • Familiarity with safety standards and best practices in a machining environment.
Desired
  • Experience with stainless steel, aluminum, and exotic alloys.
  • Experience running tight tolerance production work (+/- .001 or tighter).
Physical Demands

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is frequently required to stand and hear. The employee is frequently required to walk; reach with hands/arms; lift and/or lower; push and/or pull; and use hands to finger, handle, feel and/or finely manipulate objects. The employee must frequently lift/move and/or push/pull up to 20 lbs. and occasionally lift/move and/or push/pull up to 50 lbs. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Use of vision correction is acceptable, if necessary; however, any vision correction apparatus must meet all safety guidelines for the area of activity.

Employee Acknowledgement

By signing below, I acknowledge that I have read this job description and fully understand the requirements set forth herein. I understand that this is to be used as a guide and that I will be responsible for performing other duties as assigned. I further understand that this job description does not constitute an employment contract with MW Components and is not intended to interfere with or modify the at-will employment relationship.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

CNC Lathe setup machinist/CNC Operator II 1st shift
CNC Lathe setup machinist/CNC Operator II 1st shift

Paragon Medical • Corona (CA)

On-site
USD 28,000 - 40,000
CNC Lathe setup machinist/CNC Operator II 1st shift
CNC Lathe setup machinist/CNC Operator II 1st shift

MW Components • Corona (CA)

On-site
USD 28,000 - 40,000
CNC Programmer/Set-up
CNC Programmer/Set-up

Fairway Staffing Solutions • Perris (CA)

On-site
USD 55,000 - 75,000
CNC Machinst
CNC Machinst

Duravant • Redmond (OR)

On-site
USD 70,000 - 95,000
Machinist II - 2nd Shift Req# 796
Machinist II - 2nd Shift Req# 796

Standex International Corporation • New Berlin (WI)

On-site
USD 30,000 - 39,000
CNC Machinst
CNC Machinst

Key Technology, Inc. • Redmond (OR)

On-site
USD 55,000 - 85,000
Machinist III
Machinist III

Sumitomo Drive Technologies USA • Chesapeake (VA)

On-site
USD 36,000 - 60,000
Sign-on bonus
Paid weekly
Climate control
+4
CNC Machinist Level II
CNC Machinist Level II

Hayes Manufacturing • Pineville (LA)

On-site
USD 45,000 - 65,000
Overtime opportunities
Competitive compensation
CNC Machinist III
CNC Machinist III

Triton Environmental Consultants, Ltd. • Snoqualmie (WA)

On-site
USD 60,000 - 90,000
Machinist III: Chesapeake
Machinist III: Chesapeake

Sumitomo Group • Chesapeake (VA)

On-site
USD 58,000 - 72,000
Paid Time Off including Birthday Hours
Life Insurance (Company Paid)
Disability Insurance (Company Paid)
+3