CMM Operator / Quality Inspector (PC-DMIS) - Aerospace

JM Fabrication; Arlington (TX); Presencial; USD 41.000 - 69.000; Jornada completa

Ventajas ofrecidas por este puesto de trabajo

Medical insurance

Vision insurance

Life insurance

Long-term disability insurance

Short-term disability insurance

Health Savings Account (HSA)

Pet insurance

Descripción de la vacante

JM Fabrication Company, LLC in Arlington, TX is seeking a CMM Operator / Quality Inspector with hands-on PC-DMIS experience to inspect precision parts for aerospace and defense applications.

You will run CMM programs, read drawings with GD&T, perform FAI and in-process inspections, and support AS9102 reports, reporting to the Quality Manager. This role requires 2+ years of inspection experience and the ability to work on-site in a regulated environment.

Formación

• 2+ years of dimensional inspection experience in manufacturing.
• Practical PC-DMIS experience: loading and running existing CMM programs, verifying alignments, and interpreting results.
• Ability to read engineering drawings and apply GD&T to real part setups and measurements.
• Proficiency with precision measuring instruments and manual dimensional inspection.
• Understanding of how fixturing, alignment, cleanliness, and temperature affect measurement accuracy.
• Strong attention to detail and accurate, complete inspection records.
• Clear communication with Quality and Production personnel.
• Basic computer skills, including Microsoft Excel and electronic inspection/manufacturing records.
• Ability to work independently within established procedures and recognize when technical guidance is needed.
• Must be a U.S. person (ITAR) due to access to controlled data in this role).

Responsabilidades

• Set up and operate the CMM using PC-DMIS to run approved inspection programs, review measurement results, and generate inspection reports.
• Verify part identification, drawing revision, inspection program, fixturing, probe qualification, and part alignment before accepting inspection results.
• Perform first article inspection (FAI), in-process inspection, final inspection, and receiving inspection as assigned.
• Read and interpret engineering blueprints, specifications, and GD&T per ASME Y14.5.
• Apply GD&T to inspection setups and results: datum reference frames, feature control frames, basic dimensions, position, profile, flatness, perpendicularity, parallelism, and runout.
• Interpret material condition modifiers (MMC, LMC, RFS) and tolerance where applicable.
• Perform manual inspection with micrometers, calipers, height gauges, dial indicators, gauge pins, and surface plates.
• Investigate unexpected readings and elevate concerns involving setup, alignment, inspection programs, or drawing interpretation.
• Document results accurately and maintain traceability to part, job, drawing revision, and inspection equipment.
• Identify, document, and segregate nonconforming material per company procedures; communicate discrepancies promptly to Quality and Production.
• Support AS9102 First Article Inspection reports when required by the customer.
• Verify calibration status, perform routine operator checks and cleaning, and report equipment concerns.
• Support root cause investigations, corrective actions, and improvements to inspection methods.
• Maintain an organized inspection area and follow company quality and safety procedures.

Conocimientos

Dimensional inspection

PC-DMIS operation

Reading engineering drawings

GD&T interpretation

Manual inspection with instruments

Attention to detail

Communication

Independent work

Herramientas

PC-DMIS software

Excel

Descripción del empleo

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

CMM Operator / Quality Inspector (PC-DMIS) - Aerospace

Full Time J.M. Fabrication Company, LLC, Arlington, TX, US

Today Requisition ID: 1043

Salary Range: $30.00 To $50.00 Hourly

CMM Operator / Quality Inspector (PC-DMIS) – Aerospace & Defense – Arlington, TX

Pay:$30 – $50 per hour, based on experience
Schedule: Full-time, on-site
Location: Arlington, Texas (Dallas–Fort Worth)
Benefits: Medical, dental, vision, 401(k), company-paid life insurance, pet insurance, and more (full list below)

About JM Fabrication

JM Fabrication Company, LLC is an ITAR-registered aerospace and defense manufacturer in Arlington, TX, producing precision fabricated and machined parts and assemblies for aerospace and defense customers. Our Quality team is the last line of defense on flight and defense hardware, and we are adding an experienced CMM Operator / Quality Inspector to the team.

Position Summary

We are hiring a CMM Operator / Quality Inspector with hands-on Hexagon PC-DMIS experience to perform dimensional inspection of precision parts and assemblies. You will run and verify CMM programs, interpret engineering drawings and GD&T (ASME Y14.5), perform first article (FAI), in-process, final, and receiving inspection, and support AS9102 First Article Inspection reports. This role reports to the Quality Manager. CMM programmers and QC inspectors looking to grow into CMM programming are encouraged to apply.

Key Responsibilities

• Set up and operate the CMM using PC-DMIS to run approved inspection programs, review measurement results, and generate inspection reports.
• Verify part identification, drawing revision, inspection program, fixturing, probe qualification, and part alignment before accepting inspection results.
• Perform first article inspection (FAI), in-process inspection, final inspection, and receiving inspection as assigned.
• Read and interpret engineering blueprints, specifications, and GD&T per ASME Y14.5 (revision per drawing or customer requirement).
• Apply GD&T to inspection setups and results: datum reference frames, feature control frames, basic dimensions, position, profile, flatness, perpendicularity, parallelism, and runout.
• Interpret material condition modifiers (MMC, LMC, RFS) and bonus tolerance where applicable.
• Perform manual inspection with micrometers, calipers, height gauges, dial indicators, gauge pins, and surface plates.
• Investigate unexpected readings and elevate concerns involving setup, alignment, inspection programs, or drawing interpretation.
• Document results accurately and maintain traceability to part, job, drawing revision, and inspection equipment.
• Identify, document, and segregate nonconforming material per company procedures; communicate discrepancies promptly to Quality and Production.
• Support AS9102 First Article Inspection reports when required by the customer.
• Verify calibration status, perform routine operator checks and cleaning, and report equipment concerns.
• Support root cause investigations, corrective actions, and improvements to inspection methods.
• Maintain an organized inspection area and follow company quality and safety procedures.

Required Qualifications

• 2+ years of dimensional inspection experience in manufacturing, including hands-on CMM operation.
• Practical PC-DMIS experience: loading and running existing CMM programs, verifying alignments, and interpreting results.
• Ability to read engineering drawings and apply GD&T to real part setups and measurements.
• Proficiency with precision measuring instruments and manual dimensional inspection.
• Understanding of how fixturing, alignment, cleanliness, and temperature affect measurement accuracy.
• Strong attention to detail and accurate, complete inspection records.
• Clear communication with Quality and Production personnel.
• Basic computer skills, including Microsoft Excel and electronic inspection/manufacturing records.
• Ability to work independently within established procedures and recognize when technical guidance is needed.
• Must be a U.S. person (U.S. citizen, U.S. lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3)) because this position requires access to ITAR-controlled technical data.

Preferred Qualifications

• CMM programming in PC-DMIS: creating, modifying, troubleshooting, and validating inspection programs.
• Experience inspecting precision machined parts, sheet metal/fabricated components, or assemblies.
• Experience in an AS9100 or ISO 9001 quality management system.
• Familiarity with AS9102 First Article Inspection (FAI) documentation.
• Understanding of CNC machining (milling, turning) or fabrication processes.
• Familiarity with Statistical Process Control (SPC) and Measurement System Analysis (MSA).
• Training or certification in metrology, GD&T, quality inspection, or manufacturing.

Eligible full-time employees have access to a comprehensive benefits package through ADP TotalSource, including:

• Medical insurance
• Vision insurance
• Company-paid basic life insurance
• Company-paid long-term disability insurance
• Voluntary short-term disability insurance
• Health Savings Account (HSA)
• Flexible Spending Accounts (health care and dependent care)
• Supplemental life insurance for employee, spouse, and children
• Accident, critical illness, and hospital indemnity insurance
• Pet insurance for cats and dogs
• Legal plan
• Identity theft protection
• Commuter benefits (parking and transit)
• Employee Assistance Program (EAP)
• Employee discount program

Physical Requirements and Work Environment

• Inspection and manufacturing environment with normal shop noise.
• Stand or sit for extended periods while setting up parts, operating equipment, and documenting results.
• Handle parts and inspection equipment requiring precise positioning and manual dexterity.
• Lift and move parts up to 50 lbs, using assistance or lifting equipment as appropriate.
• Perform essential job functions with or without reasonable accommodation.

JM Fabrication Company, LLC is an Equal Opportunity Employer.