Closures & Body Structures Engineer

MSI Company

Long Beach (CA)

On-site

USD 100,000 - 140,000

Full time

14 days+

Get a reply from this recruiter

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Management Solutions, Inc. in Long Beach, CA is seeking a Mechanical Engineer specializing in closures and body structures to design, modify, and release sheet metal components using CATIA or 3DEXPERIENCE.

You will optimize for stamping, hemming, joints, and integrate hardware ensuring proper kinematics and load paths. You will support DVP&R, review test results and correlate with CAE for stiffness, durability, and load path performance, and work with suppliers on part quality and delivery.

Qualifications

  • Bachelor's degree in Mechanical, Automotive, or Manufacturing Engineering, or equivalent experience.
  • 3+ years of automotive engineering experience in production vehicle development, with at least one program through launch.
  • Hands-on CAD experience in CATIA or 3DEXPERIENCE on closures or body structures, with demonstrated ownership of your own geometry.
  • Demonstrated experience in the design and release of sheet metal components or closure hardware.
  • Strong mechanical fundamentals, including section properties and stiffness, material behavior of steel and aluminum grades, and failure modes.
  • Working knowledge of GD&T, tolerance stack up, and datum and locator strategy.
  • Familiarity with DVP&R, DFMEA, and automotive product development milestones and launch gates.
  • Experience working directly with suppliers on part quality, testing, and delivery.
  • Willingness to work onsite in Long Beach, CA and support build events at the plant.

Responsibilities

  • Design, modify, and release closure and body structure sheet metal components using CATIA or 3DEXPERIENCE.
  • Optimize designs for stamping, hemming, and joining processes.
  • Package and integrate closure hardware into the body structure with proper kinematics and load paths.
  • Support DVP&R execution, review test reports, and correlate results with CAE for strength, durability, stiffness, and slam and cycle performance.
  • Support regulatory and rating compliance for closures and body structure (FMVSS 206/214, IIHS).
  • Work with suppliers on part quality, test failures, retests, and design/process changes.
  • Support prototype, pilot, and launch builds, resolving dimensional and fit issues on the floor.
  • Own CAD, BOM, and GD&T documentation and manage tolerance stack up at closures to body interfaces.
  • Drive root cause and corrective actions on issues from build/validation (oil canning, panel distortion, water leaks, closing effort).
  • Collaborate with closures mechanisms, studio design, manufacturing engineering, quality, and purchasing to maintain styling and program timing.
  • Support engineering change execution during launch and verify implementation in the plant.

Skills

CAD experience
Sheet metal design
GD&T
Launch readiness
Supplier collaboration

Education

Bachelor's degree in Mechanical/Automotive/Manufacturing Engineering

Tools

CATIA
3DEXPERIENCE

Job description

Key Responsibilities
  • Design, modify, and release closure and body structure sheet metal components, including inner and outer panels, reinforcements, and hinge, latch, and check mounting interfaces using CATIA or 3DEXPERIENCE.
  • Ensure designs are optimized for stamping, hemming, and joining processes, including spot welding, adhesive bonding, and mixed material joints.
  • Package and integrate closure hardware into the body structure, ensuring proper kinematics, clearance, and load path for hinges, latches, checks, and seals.
  • Support DVP&R execution, review test reports, and correlate physical results with CAE for strength, durability, stiffness, and slam and cycle performance.
  • Support regulatory and rating compliance for closures and body structure, including FMVSS 206 and 214 and IIHS side impact requirements.
  • Work directly with suppliers on part quality, test failures, retests, and design or process changes, driving issues to closure with clear ownership and timing.
  • Support prototype, pilot, and launch builds, resolving dimensional, fit and finish, gap and flush, and structural findings on the floor, including next day fix concepts during launch.
  • Own CAD, BOM, and GD&T documentation for assigned components, and manage tolerance stack up and datum strategy at closure to body interfaces.
  • Drive root cause and corrective action on issues discovered during build and validation, including oil canning, panel distortion, water leak, and closing effort findings.
  • Collaborate with closures mechanisms, studio design, manufacturing engineering, quality, and purchasing to maintain styling intent, structural requirements, and program timing.
  • Support engineering change execution during launch, verifying change implementation in the plant and confirming effectiveness on subsequent builds.
Required Qualifications
  • Bachelor's degree in Mechanical, Automotive, or Manufacturing Engineering, or equivalent experience.
  • 3+ years of automotive engineering experience in production vehicle development, with at least one program through launch.
  • Hands-on CAD experience in CATIA or 3DEXPERIENCE on closures or body structures, with demonstrated ownership of your own geometry.
  • Demonstrated experience in the design and release of sheet metal components or closure hardware.
  • Strong mechanical fundamentals, including section properties and stiffness, material behavior of steel and aluminum grades, and failure modes.
  • Working knowledge of GD&T, tolerance stack up, and datum and locator strategy.
  • Familiarity with DVP&R, DFMEA, and automotive product development milestones and launch gates.
  • Experience working directly with suppliers on part quality, testing, and delivery.
  • Willingness to work onsite in Long Beach, CA and support build events at the plant.
Preferred Qualifications
  • Closures experience on side doors, liftgates, hoods, or tailgates, including hemming and sealing interfaces.
  • Experience with aluminum closures or mixed material body structures.
  • Strong knowledge of sheet metal forming, including forming limits, springback, oil canning, and bake hardening.
  • Familiarity with hinge, latch, and window regulator integration from the body side.
  • CAE literacy to drive design decisions on stiffness, strength, and structural integrity.
  • Experience on EV startup or clean sheet vehicle programs.
  • Hands-on approach to physical prototyping and a boots on the ground mentality during build events.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Closures Mechanism Engineer
Closures Mechanism Engineer

MSI Company • Long Beach (CA)

On-site
USD 90,000 - 120,000
Closures & Body Structures Engineer
Closures & Body Structures Engineer

ALTEN Technology USA • Long Beach (CA)

On-site
USD 120,000 - 140,000
Closures Design Engineer
Closures Design Engineer

Pentangle Tech Services | P5 Group • Raymond (OH)

On-site
USD 85,000 - 110,000
Closures & Body Structures Engineer — Launch & Onsite
Closures & Body Structures Engineer — Launch & Onsite

MSI Company • Long Beach (CA)

On-site
USD 100,000 - 140,000
Closure DRE
Closure DRE

Segula Technologies • Auburn Hills (MI)

On-site
USD 90,000 - 120,000
Lead Body Closure Systems Engineer
Lead Body Closure Systems Engineer

Segula Technologies • Auburn Hills (MI)

On-site
USD 110,000 - 150,000
Body Closures Engineer
Body Closures Engineer

Optimal Solution Company • Dearborn (MI)

Hybrid
USD 80,000 - 110,000
Hybrid work schedule
Closures System Engineer
Closures System Engineer

ALTEN Technology USA • Long Beach (CA)

On-site
USD 120,000 - 140,000
Design Engineer Closures Engineering at Warren, MI
Design Engineer Closures Engineering at Warren, MI

Volto Consulting • Warren (MI)

On-site
USD 90,000 - 120,000
Automotive Closure Systems Engineer - Vehicle Bodies
Automotive Closure Systems Engineer - Vehicle Bodies

MSI Company • Long Beach (CA)

On-site
USD 90,000 - 120,000