Calibration and Repair Lab Technician

Sentinel Power Services, Inc.; Fort Worth (TX); On-site; USD 55,000 - 75,000; Full time

Benefits offered by this job

Health & Wellness including Medical, D

401(k) Retirement Plan Match

PTO & Holiday Pay

Paid Travel Expenses

Career Advancement Opportunities

Job summary

TDS Equipment, based in Dallas/Ft. Worth, TX, is seeking a Calibration & Repair Lab Technician to calibrate, test, troubleshoot, repair, and rework a variety of complex Measuring & Test Equipment (MTE).

You will apply metrology principles to ensure accuracy and traceability to ISO/IEC 17025 and related standards, support internal teams and customers, and maintain documentation in METTEAM/METCAL. This role emphasizes lab quality, on-time delivery, and opportunities for professional growth within

Qualifications

• High school diploma or GED.
• Experience diagnosing component-level failures and performing board-level repair and soldering.
• Experience calibrating and repairing electrical and electronic test equipment.
• Experience working with high-voltage systems and applying electrical safety protocols.
• Strong working knowledge of calibration principles including traceability and documentation practices.
• Ability to follow documented procedures and work within controlled quality systems.
• Excellent written and verbal communication skills.

Responsibilities

• Calibrate and verify a broad range of MTE, including electrical test equipment, temperature, pressure, hipots, and related equipment.
• Troubleshoot, repair, and rework equipment; perform soldering and board-level repair as needed.
• Prepare, review, and maintain calibration documentation in METTEAM/METCAL or equivalent.
• Maintain records supporting ISO/IEC 17025 expectations, including as-found/as-left results and traceability.
• Support internal and external audits by maintaining records and following controlled procedures.
• Balance quality with on-time delivery and communicate risks as needed.
• Provide backup coverage and cross-training for other lab functions.

Skills

Electrical testing

Diagnostics

Soldering

High voltage safety

Documentation

Education

High school diploma or GED

Tools

METTEAM

METCAL

Job description

About Us:

TDS Equipment, based in Dallas/Ft. Worth TX has been delivering industry-leading service and test equipment solutions for over 25 years. We provide electrical test equipment rental, sales, calibration and repair to power, oil & gas, and other industrial end markets. Our solutions empower customers to safely start up and optimize the performance of their electrical and controls systems.

TDS Equipment is a proud member of the TechPro Power Group family. TechPro Power Group leads the power industry with comprehensive solutions. Established in 2017, TechPro Power Group is a family of best-in-class companies providing electrical, instrumentation & control testing and start-up & commissioning services as well as electrical test equipment rental, sales, calibration and repair to the power, oil & gas, process industries and other industrial end markets. Our holdings include Potomac Testing, Sentinel Power Services, Sentinel‑TDS, LLC, and TDS Equipment.

Benefits:

• Health & Wellness including Medical, Dental, Vision, HSA & FSA
• 401(k) Retirement Plan Match Contribution
• PTO & Holiday Pay
• Paid Travel Expenses (when applicable)
• Career Advancement Opportunities

GENERAL SUMMARY:

The Calibration & Repair Lab Technician is responsible for calibrating, testing, troubleshooting, repairing, and reworking a variety of complex Measuring & Test Equipment (M&TE). This role applies metrology principles to ensure accuracy, traceability, and compliance with applicable quality and technical standards, including NQA-1, ISO/IEC 17025:2017, ISO 9001:2015, and ANSI/NCSL Z540.3. The position supports internal teams and customers by delivering timely, accurate calibration and repair services, maintaining documentation and traceability to NIST, and upholding lab environment and quality system requirements.

Key Responsibilities:

1. Calibration, Verification & Metrology Execution:

• Perform calibrations and verifications on a broad range of M&TE, including (as qualified): electrical test equipment, temperature, pressure, hipots, relay test sets, high current test sets, and related industrial test equipment.
• Use appropriate lab standards and instruments (e.g., Fluke 550xA, 5720A, multimeters, oscilloscopes, deadweight testers) and follow documented methods and specifications.
• Ensure measurement traceability, correct application of tolerances, and proper handling of standards and accessories.

2. Troubleshooting, Repair & Rework:

• Diagnose failures at the component and assembly level; perform repair, rework, and functional testing, including soldering and board-level repair where required.
• Troubleshoot equipment with limited documentation or incomplete manufacturer data; identify failure modes and repair paths efficiently.
• Conduct incoming inspections to verify accessories, documentation, and customer-reported symptoms/malfunctions.

3. Documentation, Systems & Traceability:

• Prepare, review, and maintain calibration and repair documentation in designated systems (e.g., METTEAM/METCAL or equivalent).
• Maintain complete records supporting ISO/IEC 17025 expectations, including as-found/as-left results, traceability, and documented repair actions.
• Support uncertainty-related documentation as assigned (e.g., uncertainty inputs, traceability chains, method references).

4. Quality System & Standards Compliance:

• Execute work in alignment with NQA-1, ISO/IEC 17025:2017, ISO 9001:2015, ANSI/NCSL Z540.3 and internal procedures.
• Support internal and external audit readiness by maintaining records, following controlled procedures, and helping address corrective actions as assigned.
• Balance quality requirements with on-time delivery expectations; elevate risks to quality or schedule appropriately.

5. Lab Operations & Continuous Improvement:

• Monitor and help maintain lab environmental and workspace conditions suitable for metrology and calibration work.
• Identify parts, consumables, and tools needed to support inventory levels and routine repairs; communicate needs to the Lab Manager.
• Assist in developing/improving methods, processes, and procedures to increase consistency, accuracy, and throughput.

6. Team Coverage & Cross-Training:

• Provide backup coverage for other lab functions during absences; demonstrate flexibility and willingness to learn additional calibration/repair disciplines.

7. Additional Responsibilities:

• Perform other related duties as assigned to support business needs.
• Continuously seek opportunities for professional development and contribute to team-wide learning and growth.

Requirements

• Demonstrated experience diagnosing component-level failures and performing board-level repair and soldering.
• Experience calibrating and repairing electrical and electronic test equipment.
• Experience working with high-voltage systems and applying electrical safety protocols (including arc flash awareness).
• Strong working knowledge of electrical and electronic principles, troubleshooting methods, and repair practices.
• Familiarity with calibration principles including traceability, measurement integrity, and controlled documentation practices.
• Ability to follow documented procedures and work within controlled quality systems.
• High attention to detail with strong documentation habits and ability to maintain accurate records.
• Ability to work independently with minimal supervision and exercise sound technical judgment.
• Ability to balance quality requirements with on-time delivery expectations.
• Strong organizational and time management skills.
• Effective written and verbal communication skills.
• Proficiency with standard business software and laboratory documentation systems.
• High school diploma or GED.
• Valid driver’s license required; must be able to operate a company or personal vehicle for business purposes and meet all applicable company and client screening requirements based on job duties (e.g., motor vehicle record, background check, drug testing, or other applicable screenings).

Preferred Qualifications

• 3–5 years of relevant calibration and/or repair experience in a commercial or military laboratory environment.
• Military PMEL training (or equivalent).
• Experience with METTEAM, METCAL, or similar calibration management systems.
• Working knowledge of uncertainty analysis and measurement uncertainty concepts.
• Experience supporting or working within ISO/IEC 17025:2017, ISO 9001:2015, ANSI/NCSL Z540-3, or NQA-1 quality programs.
• Experience in the power/energy industry.
• Experience calibrating and repairing hipots, relay test sets, high current test sets, temperature and pressure equipment.
• Experience performing incoming inspections and verifying accessories and documentation.
• Experience supporting internal or external audits.

Physical Requirements

• Sit or stand for extended periods.
• Perform repetitive movements, such as typing or filing.
• Reach with hands and arms.
• Communicate verbally and in writing.
• Lift and/or move up to 25 pounds.
• Use hands to handle, control, or feel objects, tools, or controls.
• Walk, stoop, crouch, or crawl.
• Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this position.

This job description outlines the primary responsibilities and qualifications for the position, highlighting the collaborative and essential skills necessary for success. While we aim to provide an accurate depiction of the role, actual duties may vary based on organizational needs and evolving business requirements. These statements describe the general nature and level of work performed and are not an exhaustive list of all responsibilities, duties, and skills required.

Equal Opportunity & E-Verify Notice

TechPro Power Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability.