CAD Designer, Model-Based Definition (Levels

TCS Inc

Bedford (IN)

On-site

USD 70,000 - 110,000

Full time

1 hour ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Health benefits
401(k) plan
Paid holidays
Paid time off

Job summary

Tri-County Steel LLC (TCS) seeks CAD Designers at Levels I–III to create and maintain 3D models and TDPs for Navy-related hardware and test fixtures at NSWC Crane. This cradle-to-grave role covers concept through first article verification and life-cycle sustainment, delivering Model-Based Definition in Creo, SolidWorks, and Windchill with direct customer interaction.

The successful candidate will advance through increasingly responsible CAD tasks, mentor peers, and ensure compliance with ASME

Qualifications

  • Two years of 3D CAD design experience at Level I in SolidWorks or Creo (Windchill learnable on the job).
  • Five years of drafting and design experience for Level II, including assemblies and production drawings with GD&T knowledge.
  • Eight years of drafting and design experience for Level III, with Creo and Windchill and military/aerospace drawing standards; MBD experience preferred.
  • Experience with 3D modeling and production drawings in multiple CAD tools; strong dimensioning and tolerance knowledge.
  • Must be able to obtain and maintain DoD Secret clearance; Interim Secret required to start.

Responsibilities

  • Create and modify 3D models and 2D drawings in Creo and SolidWorks, including detail, assembly, installation, and interface drawings.
  • Build Model-Based Definition (MBD) by annotating models with dimensions, tolerances, and notes for manufacturing and inspection.
  • Develop, release, and maintain Technical Data Packages (TDPs) in Windchill under configuration control.
  • Prepare drawing changes (ECPs/NORs/revisions) and support Change Control Board actions across the product life cycle.
  • Convert legacy 2D drawings and older CAD data into current 3D models; support prototype fabrication and first article verification.
  • Collaborate with customer, engineers, and technicians to capture design intent and prepare deliverables for design reviews.
  • Apply ASME Y14.100, ASME Y14.5 (GD&T), and MIL-STD-31000 to all deliverables.
  • At Level III, lead CAD tasks, mentor designers, and provide status updates to stakeholders.

Skills

Model-Based Definition
GD&T
3D CAD design
Communication
Attention to detail

Education

High School Diploma or equivalent
Associate degree or technical certificate in design technology/drafting/mechanical engineering technology

Tools

SolidWorks
Creo
Windchill
NX / other CAD tools

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

CAD Designer, Model-Based Definition (Levels

Bedford, IN, US

2 days ago Requisition ID: 1171

Company:
Tri-County Steel LLC (TCS)

Location:
On-site at NSWC Crane

Employment Type:
Full-time

Salary:
Commensurate with experience.

Clearance Level Required:
Secret. Interim Secret required to start. US Citizenship required.

About Us

Tri-County Steel LLC (TCS) is a service-disabled veteran-owned small business located in Bedford, Indiana. We have been a trusted defense contractor supporting our industry and government partners for over 14 years, offering a wide variety of logistics, programmatic, and engineering support services. We pride ourselves on a strong commitment to our clients and a focus on quality and reliability in everything we do. Additionally, we are dedicated to the growth and development of our employees, providing opportunities for advancement and professional growth.

Job Summary

TCS is seeking CAD Designers at Levels I through III to create and maintain 3D models, drawings, and Technical Data Packages (TDPs) for Navy weapons systems, test fixtures, and platform integration efforts at NSWC Crane. This is a cradle-to-grave engineering environment: the CAD Designer will help take hardware from concept and prototype through first article verification, TDP release, and life-cycle sustainment. As the Navy moves from drawings to models, the 3D model is becoming the authoritative source that parts are built and inspected from. The successful candidate will build that Model-Based Definition (MBD) in Creo, SolidWorks, and Windchill, working directly with the customer, engineers, technicians, and other designers. Designers who work in SolidWorks today and want to add Creo and Windchill will be trained.

Essential Functions
  • Create and modify 3D models and 2D drawings in Creo and SolidWorks, including detail, assembly, installation, and interface drawings for mechanical, electro-mechanical, and electrical hardware such as sheet metal, machined parts, cable and harness, and mounting and interface hardware.
  • Build Model-Based Definition (MBD) by annotating 3D models with dimensions, tolerances (GD&T), and notes so parts can be made and inspected from the model.
  • Develop, release, and maintain Technical Data Packages (TDPs) in Windchill under configuration control.
  • Prepare and process drawing changes (ECPs, NORs, revisions) and support Change Control Board actions across the product life cycle.
  • Convert legacy 2D drawings and older CAD data into current 3D models.
  • Support prototype fabrication and first article verification with shop-ready drawings, measurements using calipers, gauges, and other tools, and as-built updates to the TDP.
  • Work closely with the customer, engineers, and technicians to capture design intent, and prepare drawings and models for design reviews.
  • Apply ASME Y14.100, ASME Y14.5 (GD&T), and MIL-STD-31000 to all deliverables.
  • At Level III, lead CAD tasks, check other designers' models and drawings, mentor designers, and provide status to stakeholders.
Experience and Skills
  • High School Diploma or equivalent required.
  • Level I: Minimum two (2) years of 3D CAD design experience in SolidWorks, Creo, or a similar tool. Creo and Windchill can be learned on the job.
  • Level II: Minimum five (5) years of drafting and design experience, including assemblies and production drawings, with working knowledge of GD&T.
  • Level III: Minimum eight (8) years of drafting and design experience, including Creo and Windchill and military or aerospace drawing standards. Model-Based Definition (MBD) experience strongly preferred.
  • 3D modeling and production drawing experience in SolidWorks, Creo, Solid Edge, NX, Inventor, or a similar 3D CAD tool.
  • Working knowledge of dimensioning and tolerancing, and of how parts are machined, fabricated, and assembled.
  • Willingness to learn Creo and Windchill if not currently used.
  • Proficiency with Microsoft Word and Excel.
  • Must be able to obtain and maintain a DoD Secret clearance; an Interim Secret clearance is required to start.
  • Strong attention to detail and the ability to communicate technical ideas clearly to engineers, technicians, and customers.
Desired Qualifications
  • Associate degree or technical certificate in design technology, drafting, or mechanical engineering technology.
  • PTC Creo certification, or SOLIDWORKS CSWA or CSWP certification.
  • Experience with Windchill or another PDM or PLM system, and with formal change control.
  • Model-Based Definition, 3D annotation, or product and manufacturing information (PMI) experience; familiarity with ASME Y14.41 and ASME Y14.47.
  • Experience with ASME Y14.100, ASME Y14.5, and MIL-STD-31000 TDPs, or other military or aerospace drawing standards.
  • Prior experience supporting Navy or DoD weapons systems, test fixtures, platform integration, or test and evaluation hardware.
  • Interest in growing into a lead designer or configuration and data management role.
  • An active Secret clearance.
Training and Certifications
  • TCS provides Creo and Windchill training with an experienced mentor.
  • Designers hired at Level I are expected to earn the PTC Creo certification within 90 days of start.
Travel

Minimal travel anticipated.

  • Comprehensive health benefits, including life, health, dental, vision, short-term disability (STD), and long-term disability (LTD) coverage for eligible employees and family members.
  • 401(K) Plan with company match.
  • 12 paid holidays.
  • Paid time off (PTO).
Application Process

We invite resumes from all interested parties. Please list the CAD and PDM tools you use, any certifications (PTC, CSWA, CSWP, or others), and your clearance status. Sample drawings or model images that contain no proprietary or controlled information are welcome.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

CAD Designer, Model-Based Definition (Levels
CAD Designer, Model-Based Definition (Levels

Tri-County Steel • Bedford (IN)

On-site
USD 65,000 - 110,000
Health benefits
401(K) Plan
12 paid holidays
+1
Drafter IV
Drafter IV

TCS GovCon • Bedford (IN)

On-site
USD 65,000 - 95,000
Health benefits
401(k) plan
12 holidays
+1
Drafter IV
Drafter IV

Tri County Steel Llc • Bedford (IN)

On-site
USD 90,000 - 115,000
Health benefits
401(k) Plan
12 paid holidays
+1
Drafter IV
Drafter IV

Tri-County Steel • Bedford (IN)

On-site
USD 70,000 - 100,000
Health benefits
401(k) plan
Paid holidays
+1
Drafter IV
Drafter IV

TCS INC • Bedford (IN)

On-site
USD 65,000 - 90,000
Health benefits
401K
Paid holidays
+1
Drafter IV
Drafter IV

career page • Crane (IN)

On-site
USD 70,000 - 95,000
Comprehensive health benefits
401(k) plan with company match
12 paid holidays
+1
Configuration and Data Management Specialist
Configuration and Data Management Specialist

Tri County Steel Llc • Bedford (IN)

On-site
USD 70,000 - 110,000
Health, dental, vision and life保险
401(K) plan with company match
12 paid holidays
+1
Configuration and Data Management Specialist
Configuration and Data Management Specialist

TCS GovCon • Bedford (IN)

On-site
USD 65,000 - 95,000
Comprehensive health benefits
401(K) Plan with company match
12 paid holidays
+1
CAD Designer (MBD) - Defense Systems, Secret Clearance
CAD Designer (MBD) - Defense Systems, Secret Clearance

TCS Inc • Bedford (IN)

On-site
USD 70,000 - 110,000
Health benefits
401(k) plan
Paid holidays
+1
Configuration and Data Management Specialist
Configuration and Data Management Specialist

Tri-County Steel • Bedford (IN)

On-site
USD 80,000 - 120,000
Health, dental, vision benefits and DS
401(k) match
Paid holidays
+1