Bridge Design-Inspection Engineer
Taleo
Turn this role into an interview — a resume and cover letter built around what this employer wants.
Benefits offered by this job
Job summary
The Texas Department of Transportation (TxDOT) is seeking a Transportation Engineer I–III to perform bridge inspection and design work from the Dallas District headquarters in Mesquite, TX. The role supports inspection activities, scour documentation, and bridge or geotechnical projects across our expanding system.
Candidates should have a Bachelor's degree in engineering and may advance from Engineer I to III with experience. On-site work, travel up to 10%, and standard full-time hours apply.
Qualifications
- Bachelor's degree in engineering or related field.
- Experience in bridge inspection and design.
- Knowledge of Bentley’s OpenBridge Designer or geotechnical design software.
Responsibilities
- Perform routine and special bridge inspections and condition surveys.
- Contribute to design work for concrete/steel bridges and related structures.
- Review Plans, Specifications & Estimates (PS&E) submissions and shop drawings.
- Assist in bridge inspection-related matters and scour documentation.
- Provide technical support on-site and during construction.
Skills
Education
Tools
Job description
Job Description - Bridge Design-Inspection Engineer (2602504)
Job Description
Bridge Design-Inspection Engineer - ( 2602504 )
Position Information
Dallas District’s Bridge Section has a unique opportunity for a Design–Inspection Engineer based in our headquarters in Mesquite, TX. This engineer will perform field work as part of the bridge inspection team while also contributing to design work for a variety of construction and maintenance projects. Dallas District oversees the maintenance, inspection, and monitoring of more than 7,000 bridges—more structures than most states. Responsibilities for this position will include routine inspections, special inspections, condition surveys, QC of inspections, and preparation and review of scour documentation. This position will focus on either bridge design or geotechnical design. Regardless of primary focus, all engineers in this role will participate in inspection activities and scour documentation. For those focused on geotechnical design, responsibilities may include retaining wall design and geotechnical analysis. For those focused on bridge design, responsibilities may include the design of concrete and steel bridges and miscellaneous structures. The Dallas District is one of the fastest-growing areas in Texas. Our Bridge Section is involved in all aspects of design, construction, and maintenance for our expanding bridge and roadway system. Additional responsibilities could include plan review, development of bridge maintenance projects, shop plan review, responding to contractor questions, and resolving construction issues. The ideal candidate has knowledge of Bentley’s OpenBridge Designer software or geotechnical design and analysis software, can self-manage small projects, and contribute effectively to larger ones.
Title/Grade/Salary Transportation Engineer I B24: $65,104 - $106,634 Transportation Engineer II B25: $69,572 - $114,099 Transportation Engineer III B26: $76,530 - $129,430
This position is for a Transportation Engineer I, II or III. The Texas Department of Transportation reserves the sole right in determining the level of position based on the applicant's work experience, education, skill level, and all other appropriate factors, and based on business needs.
Benefits and Perks
At TxDOT, we value work-life balance and are committed to providing our employees with a comprehensive range of benefits and programs, including:
- Retirement Plans
- Alternative and/or Flexible Work Schedules
- Paid Leave and Holidays
- Health Premiums paid at 100% for Full-Time Employees
- On-the-Job Training
- Tuition Assistance Program
- Holistic Wellness Program with Leave Incentives
- Career Development and Advancement Opportunities
- Family-Friendly Policies and Programs
In 2024, TxDOT was recognized as a Best Place for Working Parents, and many of our offices statewide are also designated as Texas Mother-Friendly Worksites. These recognitions reflect our dedication to supporting families and promoting a healthy work-life balance.
For a complete list of our total compensation package please visit our website at: Total Compensation Package
To view benefits available to all State of Texas employees visit: Benefits at a Glance | ERS (texas.gov)
Transportation Engineer I
This engineer will perform complex transportation engineering work in one or more functional areas such as project development and design, Bridge Inspection and maintenance. Ensures compliance with applicable federal and state laws, policies, procedures, standards and guidelines. Work requires contact with governmental officials and private entities. Employees at this level follow standard practices that do not require frequent supervision of details.
Transportation Engineer II
This engineer will perform complex transportation engineering work in one or more functional areas such as project development and design, Bridge Inspection and maintenance. Ensures compliance with applicable federal and state laws, policies, procedures, standards and guidelines. Work requires contact with governmental officials and private entities. Employees at this level perform work independently on assignments; however, all unusual issues are referred to the supervisor.
Transportation Engineer III
This engineer will perform advanced and complex transportation engineering work in one or more functional areas such as project development and design, Bridge Inspection and maintenance. Ensures compliance with applicable federal and state laws, policies, procedures, standards and guidelines. Work requires contact with governmental officials and private entities. Employees at this level establish their own work plan and priorities to meet set objectives. Issues are rarely referred to the supervisor but are handled at the occurrence.
- Drives/travels to project/work locations to make on-site engineering reviews, analyses, tests and to provide technical support.
- Performs engineering design work such as development of layouts, sketches, plans, specifications, estimates and contracts.
- Performs the review and processing of Plans, Specifications & Estimates (PS&E) submission, special specifications or special provisions.
- Assists in reviewing shop drawings prepared by fabricators for bridges and related structures.
- Assists districts with bridge inspection-related matters.
- Performs other job responsibilities as assigned.
Transportation Engineer II - all the above plus:
- Reviews and checks special designs and solutions for unique structural problems.
- Answers technical and policy questions related to bridge inspection and maintains bridge inspection data; analyzes data and provides summaries.
- Reviews designs and detailed drawings of bridges and related structures prepared by other engineers and technicians.
Transportation Engineer III - all the above plus:
- Designs highly complex bridge projects.
- Develops and/or reviews engineering related documents, correspondence, reports and remediation plans.
- Ensures compliance with National Bridge Inspection Standards.
- Rates and monitors load carrying capacities of bridges.
- Schedules, assigns, and oversees bridge inspection activities.
Bachelor's Degree in engineering or related science bachelor's or higher degree accepted by TX PELS.
Transportation Engineer I - 4 years engineering, transportation engineering, or related engineering experience (Experience can be satisfied by full time or prorated part time equivalent).Related graduate level education may be substituted for experience on a year per year basis. Substitutions for Minimum Qualifications
Transportation Engineer II - 5 years engineering, transportation engineering, or related engineering experience (Experience can be satisfied by full time or prorated part time equivalent).Related graduate level education may be substituted for experience on a year per year basis. Substitutions for Minimum Qualifications
Transportation Engineer III - 6 years engineering, transportation engineering, or related engineering experience (Experience can be satisfied by full time or prorated part time equivalent).Related graduate level education may be substituted for experience on a year per year basis. Substitutions for Minimum Qualifications
Valid driver’s license. This position requires driving a state vehicle.
Licensed Prof Engineer*
*Professional engineers licensed in another state in the United States, but not currently licensed in the State of Texas, must (1) meet the license requirements of the State of Texas Engineering Practices Act, (2) obtain a professional engineering license from the State of Texas within six (6) months of the date of hire, and (3) sign an agreement to that effect as a condition of employment.
Transportation Engineer I:
Extensive knowledge of
- Standards and specifications for bridges and other transportation structures
- Design and plan preparation methods and requirements
- Bridge inspection and appraisal methods and procedures
- Performing basic design and drafting
Transportation Engineer II - all the above plus:
Extensive knowledge of
- Bridge construction and evaluation methods, procedures and regulations
- Planning, coordinating and handling multiple projects within area of responsibility to meet short and long-term deadlines
- Using computers and applicable programs, applications, and systems
Transportation Engineer III - all the above plus:
Extensive knowledge of
- Construction phasing and sequencing
- Monitoring the status and progress of projects
- Performing calculations to include material and labor estimates, expenses, technical survey data and engineering calculations
- Subject to outside environmental conditions; no effective weather protection
- Subject to extreme cold and heat; below 32 and/or above 100 degrees for more than one hour
- Subject to noise
- Subject to vibration
- Subject to hazards-moving vehicles/mechanical parts, high places/heat, or chemicals
- Required to wear protective gear - respirator, hard hat, or other devices
- Medium work: Lift up to 50 lbs at a time and frequently lift or carry objects up to 25 lbs
- Balancing-walking, standing, crouching on various surfaces without falling
- Stooping-bending body downward and forward by bending spine at waist
- Reaching-extending hand(s) and arm(s) in any direction
- Walking - moving on foot to accomplish tasks: long distance/from one work site to another
- Talking - expressing or exchanging ideas by spoken words
- Hearing - perceive sound at normal speaking levels; receive information by oral communication
- Close Visual Acuity - work includes data/figures; view a computer screen; extensive reading
- Visual Acuity-operate motor vehicles and/or heavy equipment
This job has been identified as physically demanding and will require a pre-employment physical.
Must pass a drug test prior to employment for safety impact positions. This is a Safety Impact position and will be subject to random drug testing.
Note: The Department of Transportation's Drug and Alcohol Testing Regulation – 49 CFR Part 40, at 40.151(e) – does not authorize “medical marijuana” under a state law to be a valid medical explanation for a positive drug test result for an employee in this position.
State Job Title/s : Engineer IV/III/II State Job Code/s : 2155/2154/2153
Military Occupational Specialty (MOS)
TxDOT is committed to hiring veterans. To assist in determining whether your military experience may pertain to the minimum requirements for this position, Military Occupational Specialty (MOS) codes from each branch of the U.S. Armed Forces have been assigned to each state classification code/title where applicable. The MOS codes are grouped by occupational category.
Click on the appropriate occupational category to view the MOS codes.
The Texas Department of Transportation is an Equal Opportunity Employer.
If requested, reasonable accommodations will be made for persons with disabilities for any part of the employment process in accordance with the Americans with Disabilities Action of 1990.
'/%3e%3cpath%20d='M101.744%2012.4726L102.894%2016.1947L99.0021%2013.2201L101.744%2012.4726ZM105.3%208.40937H100.488L99.0026%203.59473L97.5116%208.41047L92.7%208.40385L96.5965%2011.3834L95.1055%2016.1942L99.0021%2013.2196L101.408%2011.3834L105.3%208.40992V8.40937Z'%20fill='white'/%3e%3cdefs%3e%3clinearGradient%20id='paint0_linear_5593_1381'%20x1='90'%20y1='9.44471'%20x2='99'%20y2='9.44471'%20gradientUnits='userSpaceOnUse'%3e%3cstop%20stop-color='%2300AD70'/%3e%3cstop%20offset='0.998594'%20stop-color='%2300B67A'/%3e%3cstop%20offset='1'%20stop-color='%23DCDCE6'/%3e%3c/linearGradient%3e%3c/defs%3e%3c/svg%3e){kind=small}
