AVL Technician

Churchfront; Melbourne (FL); Hybrid; USD 25,000 - 34,000; Full time

Benefits offered by this job

401(k) plan

Training and development

Certifications

Job summary

Churchfront in Melbourne, FL designs and installs AVL systems for churches nationwide. You will build, wire, and test racks in the shop, then install on site, pulling cables, mounting displays, and terminating connections until the room works.

This hands-on role rewards precision and offers room to grow within a team that values craftsmanship. You should be able to lift 50 pounds, work at height, and travel for projects.

Qualifications

• Hands-on AV installation experience preferred.
• Comfortable working at heights and able to lift 50 pounds.
• Familiar with reading plan sets and building from them.
• Valid driver's license and ability to travel domestically by air.
• Willing to learn Dante, DSP platforms and network configuration.

Responsibilities

• Build and wire equipment racks before shipment.
• Pull and terminate audio, video, network, and DMX cables.
• Mount and align displays and speakers; work from ladders.
• Assist with system tuning and DSP presets.
• Label, document and photograph what you built.

Skills

Hands-on AV installation

Working at height

Proficiency with hand tools

Read plan sets

Valid driver’s license

Travel domestically

Tools

Dante

DSP software

Job description

We design and install AVL systems for churches across the country. This is the job that puts them in.

You will be in the shop in Melbourne building and wiring racks, then on site pulling cable, hanging speakers, mounting displays and terminating connections until the room works. It is physical work that rewards precision. A rack you build cleanly today is a rack somebody can troubleshoot three years from now. A cable you label properly saves a volunteer twenty minutes on a Sunday morning when something goes sideways.

This is a hands‑on seat with room to grow. Several people on our team started here.

What you will be doing

Shop prep and rack fabrication

Build and wire equipment racks before they ship. Test gear, load firmware, label everything, and pack the truck so nothing is missing when the crew lands.

Installation

Pull and terminate audio, video, network and DMX cable. Mount and align displays, projectors, speakers and lighting fixtures. Work safely from ladders and lifts. Build to the drawings, and say something when the field does not match them, because it often does not.

Commissioning support

Assist with system tuning, DSP presets, network configuration and signal flow verification. Help prove out every input and output before we hand a room over.

Conduct on site

You are working inside an occupied building that holds services, weddings and funerals while we are there. Keep the site clean and safe, communicate with church staff, and leave the place better than you found it.

Closeout

Label, document and photograph what you built. Work the punch list until it is empty.

Who we are looking for

Someone who takes pride in work nobody sees. Most of what you build ends up behind a rack door or above a ceiling, and the only people who will ever notice are the techs who come after you. Do it right anyway.

You should be comfortable on a lift, on a ladder, and on your feet all day. You should be willing to fly to a job, work a focused week with a small crew, and come home. And it should matter to you that the system you installed is the reason a congregation can actually hear the message.

If you have run production at a church, you already understand this work from the other side of it. That is worth a great deal to us and it shows up in how you treat the room.

What you need

• Hands‑on experience in AV installation, low voltage, electrical work, or church production
• Comfortable working at height from ladders and lifts, and able to lift 50 pounds
• Proficient with hand and power tools
• Able to read a plan set and build from it
• Valid driver’s license, and able to travel domestically by air
• Willing to learn Dante, DSP platforms and network configuration if you do not know them yet

Nice to have

• Aerial or scissor lift certification
• Low voltage experience
• Rigging experience
• Time spent running audio, video or lighting on a church production team

Compensation and benefits

$18 to $25 per hour, depending on experience. This is an hourly, non‑exempt position, so hours beyond 40 in a workweek are paid at time and a half.

• Eligible for the Churchfront 401(k) plan
• Training and development, including the certifications this role calls for