Assembler, Industrial Equipment

Manitex

Georgetown (TX)

On-site

USD 21,000 - 34,000

Full time

3 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Tadano is seeking an assembler to join our Georgetown, TX facility under the supervision of a Production Supervisor. You will assemble sub-assemblies and final assemblies of crane products, following documented procedures and safety standards to ensure quality and on-time delivery.

The role emphasizes lean manufacturing, attention to detail, and teamwork. Reading technical drawings, using hand and power tools, and operating forklifts/cranes are important components; prior experience with heavy

Qualifications

  • High school diploma or equivalent (required).
  • 1–2 years of assembly or manufacturing experience (preferred; heavy equipment industry a plus).
  • Ability to read and interpret technical drawings, blueprints, and work instructions.
  • Mechanical aptitude with proficiency using hand and power tools.
  • Basic math and measurement skills (fractions, decimals, tape measure, calipers).
  • Forklift or overhead crane operation experience preferred (certification/training provided).
  • Strong attention to detail with a focus on quality and accuracy.
  • Willingness to work in a fast-paced manufacturing environment.

Responsibilities

  • Follow documented procedures to perform safe and defect-free assembly and adjustment of parts and components.
  • Leverage lean manufacturing concepts to support continuous improvement and waste elimination.
  • Use hand and industrial power tools for assembly and lifting devices to move heavy components.
  • Be held accountable for completing standard work within a reasonable cycle time.
  • Crosstrain in other work areas and learn new work procedures.
  • Plan workflow and lay out jobs. Inspect parts for adherence to specifications; grind or torch as needed.
  • Fill counterweights, cut and stamp gaskets.
  • Assemble hydraulics and air lines.
  • Locate parts needed for the assembly process. Lubricate and grease parts.
  • Assemble cranes and crane sub-assemblies for standard products, first-run or pilot products in support of and meeting production schedules.
  • Ensure bearings, seals and hydraulics fit and operate according to instructions.
  • Assist in maintaining the flow of work through the department.
  • Ensure production specifications and quality standards are met.
  • Operate and perform final check of finished products.
  • Maintain departmental housekeeping standards.
  • Follow and comply with all safety regulations and practices.
  • Complete all required paperwork.

Skills

Reading blueprints
Mechanical aptitude
Hand and power tool proficiency
Basic math
Attention to detail
Forklift/overhead crane operation

Education

High school diploma or equivalent

Tools

Calipers
Tape measure

Job description

Job ClassificationJob Type: Full-TimeLocation: Georgetown, TX OfficeFLSA Status: Non-ExemptReports To: Production SupervisorCompany OverviewSince introducing Japan's first hydraulic truck crane in 1955, Tadano has become a global leader in lifting and access equipment, helping businesses reach new heights. Known for its reliability, innovation, and performance, Tadano offers world-class solutions across the construction, energy, and industrial sectors worldwide. Its global support network ensures Tadano equipment performs effectively in any environment.In the U.S., Tadano operates production facilities in Texas and Virginia, supporting a broad product line that includes rough terrain cranes, all terrain cranes, lattice boom crawler cranes, telescopic boom crawler cranes, truck cranes, boom trucks, articulated cranes, pick & carry cranes, and aerial work platforms. Manitex Inc. was acquired by Tadano January 2025 and a manufacturer of truck cranes and boom trucks located in Georgetown, TX.Job SummaryUnder the general direction of a Production Supervisor, the Assembler plans, prepares and assembles sub- assemblies and final assemblies of all crane products, meeting company standards for quality and quantity. May perform Assembler duties in any work center as required.Key Responsibilities• Follow documented procedures to perform safe and defect-free assembly and adjustment of parts and components.• Leverage lean manufacturing concepts to support continuous improvement and waste elimination.• Use hand and industrial power tools for assembly and lifting devices to move heavy components.• Be held accountable for completing standard work within a reasonable cycle time.• Crosstrain in other work areas and learn new work procedures.• Plan workflow and lay out jobs. Inspect parts for adherence to specifications; grind or torch as needed.• Fill counterweights, cut and stamp gaskets.• Assemble hydraulics and air lines.• Locate parts needed for the assembly process. Lubricate and grease parts.• Assemble cranes and crane sub-assemblies for standard products, first-run or pilot products in support of and meeting production schedules. Ensure bearings, seals and hydraulics fit and operate according to instructions.• Assist in maintaining the flow of work through the department.• Ensure production specifications and quality standards are met.• Operate and perform final check of finished products.• Maintain departmental housekeeping standards.• Follow and comply with all safety regulations and practices.• Complete all required paperwork.Qualifications• High school diploma or equivalent (required).• 1–2 years of assembly or manufacturing experience (preferred; heavy equipment industry a plus).• Ability to read and interpret technical drawings, blueprints, and work instructions.• Mechanical aptitude with proficiency using hand and power tools.• Basic math and measurement skills (fractions, decimals, tape measure, calipers).• Forklift or overhead crane operation experience preferred (certification/training provided).• Strong attention to detail with a focus on quality and accuracy.• Willingness to work in a fast-paced manufacturing environmentCore Competencies• Attention to detail and accuracy.• Technical Skills• Safety Awareness• Teamwork• Dependability• Adaptability• Continuous ImprovementPhysical Requirements• Ability to stand, walk, bend, stoop, kneel, and reach for extended periods during a shift.• Regularly lift, carry, push, or pull materials and parts up to 50 lbs; occasional lifting of heavier items with assistance or mechanical devices.• Frequent use of hands, fingers, and arms to handle tools, materials, and equipment.• Visual acuity to read blueprints, work instructions, and inspection tools; ability to detect defects or irregularities in materials and assemblies.• Ability to wear and properly use required personal protective equipment (PPE), including safety glasses, steel-toed boots, gloves, hearing protection, and fall protection as needed.• Work performed in a manufacturing environment with exposure to moving cranes, heavy equipment, welding fumes, noise, and varying temperatures.• May be required to climb ladders, work at heights, or operate forklifts and overhead cranes with proper training and certification.Americans with Disabilities Act (ADA)This job description is intended to describe the general nature and level of work being performed. It is not an exhaustive list of all responsibilities, duties, and skills required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions of the job.Affirmative Action/Equal Employment Opportunity (AAP/EEO) StatementTadano provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Assembler
Assembler

Swvam • Richlands (VA)

On-site
USD 23,000 - 25,000
Lead Workshop Technician
Lead Workshop Technician

Tadano America • Houston (TX)

On-site
USD 69,000 - 83,000
Sales Support Specialist
Sales Support Specialist

Tadano America • Houston (TX)

On-site
USD 55,000 - 63,000
Field Service Technician
Field Service Technician

Tadano America • United States

Remote
USD 70,000 - 105,000
Lead Workshop Technician
Lead Workshop Technician

Tadano America Corporation • Houston (TX)

On-site
USD 69,000 - 83,000
Crane Assembly Technician - Industrial Equipment
Crane Assembly Technician - Industrial Equipment

Manitex • Georgetown (TX)

On-site
USD 21,000 - 34,000
Sales Support Specialist
Sales Support Specialist

Tadano Pan America • Houston (TX)

On-site
USD 55,000 - 63,000
Quality Assurance Manager
Quality Assurance Manager

Swvam • Richlands (VA)

On-site
USD 70,000 - 80,000
Assembler
Assembler

Manitowoc • Shady Grove (PA)

On-site
USD 42,000 - 65,000
Assembler Heavy Duty
Assembler Heavy Duty

GFP Co • Charlotte (NC)

On-site
USD 19,000 - 28,000