Aircraft Mechanic III - Structures and General Maintenance

EB Flight Training LLC

Mississippi

On-site

USD 70,000 - 100,000

Full time

6 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

EB Flight Training LLC is seeking an experienced Aircraft Mechanic III focused on structures and general maintenance. The role includes inspecting, repairing, and maintaining both rotary and fixed-wing aircraft, with emphasis on sheet metal, composites, and accurate documentation of work.

Candidates should have seven years of maintenance experience, familiar with technical manuals and engineering drawings, and the ability to guide junior technicians.

Qualifications

  • Seven years of aircraft maintenance experience.
  • Experience with structural/sheet metal repair.
  • Secret clearance or ability to obtain.
  • FAA Airframe and Powerplant (A&P) preferred.

Responsibilities

  • Perform daily, pre-flight, thru-flight, post-flight, periodic and special inspections using applicable technical data; document and report discrepancies.
  • Inspect structures, skins, panels, fairings and attachments for cracks, corrosion, deformation and delamination; coordinate engineering or NDI evaluation when required.
  • Remove, repair, fabricate, fit and install sheet metal parts and structural components using approved repair data, drawings and work instructions.
  • Perform close-tolerance drilling, reaming, countersinking, riveting and fastener installation while maintaining dimensional accuracy and structural integrity.
  • Perform approved composite repairs, including surface preparation, damage removal, layup, bonding, curing and finishing, within qualifications and authorization.
  • Perform corrosion removal, sealing, coating, painting, preservation and de-preservation in accordance with technical guidance.
  • Troubleshoot, remove, install, service and check mechanical systems, flight controls, hydraulic/pneumatic components and powerplant accessories.
  • Interpret current technical manuals, IETMs and engineering drawings; assist in developing maintenance work instructions.
  • Complete maintenance records, discrepancy logs and signoffs; perform authorized in-process checks and coordinate Quality inspections and hold points.
  • Maintain tool accountability, calibration compliance, FOD prevention and clean-as-you-go practices; inspect and safely use tooling, stands and ground support equipment.
  • Support towing, parking, flightline servicing and aircraft delivery. When qualified and authorized, perform F/A-18E/F engine ground runs and maintain required currency.
  • Guide junior technicians, support team leads and report task status.
  • Travel of up to 20 may be required.
  • Other duties as assigned.

Skills

Structural repairs
Sheet metal
Composite repairs
Aircraft inspections
Troubleshooting
Engineering drawings interpretation

Education

High school diploma or equivalent
Technical school graduation/associate degree

Tools

Calibrated measuring tools
Maintenance manuals

Job description

Aircraft Mechanic III - Structures and General Maintenance

GENERAL DESCRIPTION:Performs scheduled and unscheduled aircraft maintenance for rotary and fixed wing programs, emphasizing structures, sheet metal and composite repairs, daily inspections, servicing, preservation and de-preservation. Troubleshoots discrepancies, documents work, supports ground operations and guides junior technicians.

DUTIES:

  • Perform daily, pre-flight, thru-flight, post-flight, periodic and special inspections using applicable technical data; document and report discrepancies.
  • Inspect structures, skins, panels, fairings and attachments for cracks, corrosion, deformation and delamination; coordinate engineering or NDI evaluation when required.
  • Remove, repair, fabricate, fit and install sheet metal parts and structural components using approved repair data, drawings and work instructions.
  • Perform close-tolerance drilling, reaming, countersinking, riveting and fastener installation while maintaining dimensional accuracy and structural integrity.
  • Perform approved composite repairs, including surface preparation, damage removal, layup, bonding, curing and finishing, within qualifications and authorization.
  • Perform corrosion removal, sealing, coating, painting, preservation and de-preservation in accordance with technical guidance.
  • Troubleshoot, remove, install, service and check mechanical systems, flight controls, hydraulic/pneumatic components and powerplant accessories.
  • Interpret current technical manuals, IETMs and engineering drawings; assist in developing maintenance work instructions.
  • Complete maintenance records, discrepancy logs and signoffs; perform authorized in-process checks and coordinate Quality inspections and hold points.
  • Maintain tool accountability, calibration compliance, FOD prevention and clean-as-you-go practices; inspect and safely use tooling, stands and ground support equipment.
  • Support towing, parking, flightline servicing and aircraft delivery. When qualified and authorized, perform F/A-18E/F engine ground runs and maintain required currency.
  • Guide junior technicians, support team leads and report task status.
  • Travel of up to 20 may be required.
  • Other duties as assigned.

EDUCATION/EXPERIENCE REQUIREMENTS:

  • High school diploma or equivalent and documented military/civilian aircraft maintenance training; technical school graduation or associate degree preferred.
  • Minimum seven (7) years of aircraft maintenance experience, including hands-on structural/sheet metal repair, aircraft inspections and mechanical troubleshooting.
  • Working knowledge of composite repairs, corrosion control, calibrated measuring tools, maintenance records and approved technical data.
  • Ability to work independently, follow inspection requirements and guide junior personnel.
  • Must have or be able to obtain and maintain a Secret security clearance.
  • Preferred: FAA Airframe and Powerplant (A&P) certificate and previous F/A-18E/F engine turn operator qualification.
  • Preferred: U.S. Navy aircraft experience; previous CDI, CDQAR or Plane Captain qualification; modification team leadership or ordnance-handling experience.

PHYSICAL REQUIREMENTS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.

  • Must be able to walk and stand on level and/or inclined surfaces for certain periods throughout the day.
  • Must be able to climb stairs, ramps, ladders, and work stands, working at heights with fall protection devices.
  • Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.
  • May be required to lift up to 50 pounds and carry for short distances.
  • May be required to read dials/gauges, identify small objects and hand tools.
  • Must be able to see imperfections, micrometer readings and other small scales.
  • Must be able to communicate by voice and detect sound by ear.
  • Must be able to distinguish color and judge three-dimensional depth.
  • May be required to operate machinery, hand tools, ground support equipment, forklifts, etc.
  • May be required to work in varying temperatures and weather.

GENERAL DESCRIPTION:Performs scheduled and unscheduled aircraft maintenance for rotary and fixed wing programs, emphasizing structures, sheet metal and composite repairs, daily inspections, servicing, preservation and de-preservation. Troubleshoots discrepancies, documents work, supports ground operations and guides junior technicians.

DUTIES:

  • Perform daily, pre-flight, thru-flight, post-flight, periodic and special inspections using applicable technical data; document and report discrepancies.
  • Inspect structures, skins, panels, fairings and attachments for cracks, corrosion, deformation and delamination; coordinate engineering or NDI evaluation when required.
  • Remove, repair, fabricate, fit and install sheet metal parts and structural components using approved repair data, drawings and work instructions.
  • Perform close-tolerance drilling, reaming, countersinking, riveting and fastener installation while maintaining dimensional accuracy and structural integrity.
  • Perform approved composite repairs, including surface preparation, damage removal, layup, bonding, curing and finishing, within qualifications and authorization.
  • Perform corrosion removal, sealing, coating, painting, preservation and de-preservation in accordance with technical guidance.
  • Troubleshoot, remove, install, service and check mechanical systems, flight controls, hydraulic/pneumatic components and powerplant accessories.
  • Interpret current technical manuals, IETMs and engineering drawings; assist in developing maintenance work instructions.
  • Complete maintenance records, discrepancy logs and signoffs; perform authorized in-process checks and coordinate Quality inspections and hold points.
  • Maintain tool accountability, calibration compliance, FOD prevention and clean-as-you-go practices; inspect and safely use tooling, stands and ground support equipment.
  • Support towing, parking, flightline servicing and aircraft delivery. When qualified and authorized, perform F/A-18E/F engine ground runs and maintain required currency.
  • Guide junior technicians, support team leads and report task status.
  • Travel of up to 20 may be required.
  • Other duties as assigned.

EDUCATION/EXPERIENCE REQUIREMENTS:

  • High school diploma or equivalent and documented military/civilian aircraft maintenance training; technical school graduation or associate degree preferred.
  • Minimum seven (7) years of aircraft maintenance experience, including hands-on structural/sheet metal repair, aircraft inspections and mechanical troubleshooting.
  • Working knowledge of composite repairs, corrosion control, calibrated measuring tools, maintenance records and approved technical data.
  • Ability to work independently, follow inspection requirements and guide junior personnel.
  • Must have or be able to obtain and maintain a Secret security clearance.
  • Preferred: FAA Airframe and Powerplant (A&P) certificate and previous F/A-18E/F engine turn operator qualification.
  • Preferred: U.S. Navy aircraft experience; previous CDI, CDQAR or Plane Captain qualification; modification team leadership or ordnance-handling experience.

PHYSICAL REQUIREMENTS:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.

  • Must be able to walk and stand on level and/or inclined surfaces for certain periods throughout the day.
  • Must be able to climb stairs, ramps, ladders, and work stands, working at heights with fall protection devices.
  • Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.
  • May be required to lift up to 50 pounds and carry for short distances.
  • May be required to read dials/gauges, identify small objects and hand tools.
  • Must be able to see imperfections, micrometer readings and other small scales.
  • Must be able to communicate by voice and detect sound by ear.
  • Must be able to distinguish color and judge three-dimensional depth.
  • May be required to operate machinery, hand tools, ground support equipment, forklifts, etc.
  • May be required to work in varying temperatures and weather.
EQUAL OPPORTUNITY EMPLOYER / VEVRAA /ADATNC and its subsidiaries fall under ANCSA and are entitled under Federal Law to extend hiring preferences to its shareholders. ANCSA provides TNC the authority to give shareholder preference in hiring. TNC reaffirms its belief in equal employment opportunity for all employees and applicants for employment. Tyonek is an Equal Opportunity Employer and a VEVRAA Federal Contractor who affords equal employment opportunity to protected veterans and people with disabilities: Tyonek Native Corporation provides all employees and job applicants equal employment opportunities in hiring and promotion without discrimination because of age, sex, sexual orientation, genetic information, gender identity, marital status, race, religion, color, veteran status, physical or mental disability, national origin, or any other reason prohibited by law.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Aircraft Mechanic III - Structures and General Maintenance
Aircraft Mechanic III - Structures and General Maintenance

Tyonek Native Corp • Kiln (MS)

On-site
USD 55,000 - 75,000
Aircraft Mechanic II
Aircraft Mechanic II

Tyonek Native Corporation • Murray Hill (FL)

On-site
USD 65,000 - 90,000
Aircraft Mechanic II
Aircraft Mechanic II

https:/www.scheurer.org/careers/ • Jacksonville (FL)

On-site
USD 60,000 - 90,000
Sheetmetal Mechanic
Sheetmetal Mechanic

Tyonek Native Corporation • Jacksonville (FL)

On-site
USD 55,000 - 75,000
Aircraft Mechanic II (E-2)
Aircraft Mechanic II (E-2)

Tyonek Native Corporation • San Diego (CA)

On-site
USD 70,000 - 90,000
Aircraft Mechanic III - Electrical - Instrumentation
Aircraft Mechanic III - Electrical - Instrumentation

Tyonek Native Corp • Kiln (MS)

On-site
USD 90,000 - 120,000
Sheetmetal Mechanic
Sheetmetal Mechanic

https:/www.scheurer.org/careers/ • Jacksonville (FL)

On-site
USD 50,000 - 75,000
Aircraft Worker - Fuel
Aircraft Worker - Fuel

Tyonek Native Corp • Naval Air Station Lemoore (CA)

On-site
USD 60,000 - 90,000
Sheetmetal Mechanic (F-18)
Sheetmetal Mechanic (F-18)

https:/www.scheurer.org/careers/ • San Diego (CA)

On-site
USD 70,000 - 100,000
Aircraft Mechanic II
Aircraft Mechanic II

Tyonek Native Corp • Hurlburt Field (FL)

On-site
USD 52,000 - 76,000