Aircraft Mechanic III - Structures and General Maintenance

Tyonek Native Corp; Kiln (MS); On-site; USD 55,000 - 75,000; Full time

Job summary

Tyonek Native Corp in Kiln, MS seeks an experienced aircraft mechanic with a strong background in structural and sheet metal repair, composite work, and routine inspections. You will troubleshoot discrepancies, document work, and support ground operations while guiding junior technicians.

Requires a minimum seven years in aircraft maintenance, with preferred FAA A&P certification and Navy experience. Travel up to 20% may be required. Must maintain safety and quality standards across tasks.

Qualifications

• High school diploma or equivalent with documented aircraft maintenance training.
• Minimum seven (7) years of aircraft maintenance experience including structural/sheet metal repair and inspections.
• Preferred FAA Airframe & Powerplant (A&P) certificate; Navy experience or CDI/CDQAR qualifications are a plus.

Responsibilities

• Perform scheduled and unscheduled aircraft maintenance, inspections, repairs and service.
• Inspect structures, sheet metal, composites for defects and coordinate further evaluation as needed.
• Repair/fabricate/install sheet metal parts; conduct close-tolerance drilling and fastening.
• Perform corrosion control, preservation, and de-preservation per technical guidance.
• Guide junior technicians and assist leads; travel up to 20%.

Skills

Aircraft maintenance

Sheet metal

Composite repairs

Diagnostics

Troubleshooting

Inspecting/inspecting procedures

Education

High school diploma

FAA A&P preferred

Tools

Calibrated measuring tools

Job description

General Description

Performs scheduled and unscheduled aircraft maintenance for rotary and fixed wing programs, emphasizing structures, sheet metal and composite repairs, daily inspections, servicing, preservation and de-preservation. Troubleshoots discrepancies, documents work, supports ground operations and guides junior technicians.

General Description

Performs scheduled and unscheduled aircraft maintenance for rotary and fixed wing programs, emphasizing structures, sheet metal and composite repairs, daily inspections, servicing, preservation and de-preservation. Troubleshoots discrepancies, documents work, supports ground operations and guides junior technicians.

Duties

• Perform daily, pre-flight, thru-flight, post-flight, periodic and special inspections using applicable technical data; document and report discrepancies.
• Inspect structures, skins, panels, fairings and attachments for cracks, corrosion, deformation and delamination; coordinate engineering or NDI evaluation when required.
• Remove, repair, fabricate, fit and install sheet metal parts and structural components using approved repair data, drawings and work instructions.
• Perform close-tolerance drilling, reaming, countersinking, riveting and fastener installation while maintaining dimensional accuracy and structural integrity.
• Perform approved composite repairs, including surface preparation, damage removal, layup, bonding, curing and finishing, within qualifications and authorization.
• Perform corrosion removal, sealing, coating, painting, preservation and de-preservation in accordance with technical guidance.
• Troubleshoot, remove, install, service and check mechanical systems, flight controls, hydraulic/pneumatic components and powerplant accessories.
• Interpret current technical manuals, IETMs and engineering drawings; assist in developing maintenance work instructions.
• Complete maintenance records, discrepancy logs and signoffs; perform authorized in-process checks and coordinate Quality inspections and hold points.
• Maintain tool accountability, calibration compliance, FOD prevention and clean-as-you-go practices; inspect and safely use tooling, stands and ground support equipment.
• Support towing, parking, flightline servicing and aircraft delivery. When qualified and authorized, perform F/A-18E/F engine ground runs and maintain required currency.
• Guide junior technicians, support team leads and report task status.
• Travel of up to 20% may be required.
• Other duties as assigned.

Education/Experience Requirements

• High school diploma or equivalent and documented military/civilian aircraft maintenance training; technical school graduation or associate degree preferred.
• Minimum seven (7) years of aircraft maintenance experience, including hands-on structural/sheet metal repair, aircraft inspections and mechanical troubleshooting.
• Working knowledge of composite repairs, corrosion control, calibrated measuring tools, maintenance records and approved technical data.
• Ability to work independently, follow inspection requirements and guide junior personnel.
• Must have or be able to obtain and maintain a Secret security clearance.
• Preferred: FAA Airframe and Powerplant (A&P) certificate and previous F/A-18E/F engine turn operator qualification.
• Preferred: U.S. Navy aircraft experience; previous CDI, CDQAR or Plane Captain qualification; modification team leadership or ordnance-handling experience.

Physical Requirements

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions.

• Must be able to walk and stand on level and/or inclined surfaces for certain periods throughout the day.
• Must be able to climb stairs, ramps, ladders, and work stands, working at heights with fall protection devices.
• Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.
• May be required to lift up to 50 pounds and carry for short distances.
• May be required to read dials/gauges, identify small objects and hand tools.
• Must be able to see imperfections, micrometer readings and other small scales.
• Must be able to communicate by voice and detect sound by ear.
• Must be able to distinguish color and judge three-dimensional depth.
• May be required to operate machinery, hand tools, ground support equipment, forklifts, etc.
• May be required to work in varying temperatures and weather.

EQUAL OPPORTUNITY EMPLOYER / VEVRAA /ADA

TNC and its subsidiaries fall under ANCSA and are entitled under Federal Law to extend hiring preferences to its shareholders. ANCSA provides TNC the authority to give shareholder preference in hiring. TNC reaffirms its belief in equal employment opportunity for all employees and applicants for employment. Tyonek is an Equal Opportunity Employer and a VEVRAA Federal Contractor who affords equal employment opportunity to protected veterans and people with disabilities: Tyonek Native Corporation provides all employees and job applicants' equal employment opportunities in hiring and promotion without discrimination because of age, sex, sexual orientation, genetic information, gender identity, marital status, race, religion, color, veteran status, physical or mental disability, national origin, or any other reason prohibited by law.

#JSFIRM