Additive Manufacturing Manager

Phasic Energy Co; Baltimore (MD); On-site; USD 90,000 - 150,000; Full time

Job summary

Phasic Energy Co. is building an in-house metal LPBF lab near BWI to prove out new designs and drive print time, cost and yield.

You will own the printing process from R&D coupons to finished units, coordinating with an overseas manufacturing partner to scale designs into production. As the technical owner of the printing programs, you will write procedures, optimize orientation, nesting and parameters, and push for consistent quality across multi-unit orders while maintaining strict

Qualifications

• BS in Mechanical, Materials or Manufacturing Engineering.
• 5+ years with metal L-PBF in production or advanced R&D on large-format, multi-laser machines.
• Design for additive in practice; able to show yield/time/cost improvements.
• Build preparation and parameter development: orientation, nesting, laser assignment.
• Post-print and quality: stress relief, heat treatment, CT, NCRs and root cause analysis.
• Experience holding an outside manufacturer or service bureau to spec.
• Ability to build processes where none exist yet.

Responsibilities

• Stand up the lab and commission the L-PBF printer cell.
• Write procedures for printing, powder handling and post-print work.
• Work hands-on at the machine with the lab technician.
• Run test coupons and prototype builds to prove new designs.

Skills

Metal L-PBF

Design for Additive

Build preparation

Post-print QC

Outside manufacturer oversight

Process development

Education

BS in Mechanical, Materials or Manufacturing Engineering

Job description

Company Description

Phasic Energy Co. engineers high-performance thermal systems for critical industries, including data centers, defense, and energy. The company’s solutions are powered by Flux, a platform for advanced multi-physics inference and AI that enables efficient, scalable design and manufacturing. Phasic specializes in liquid-to-liquid, air-to-liquid, and two-phase heat exchangers that deliver superior performance at megawatt scale. Team members work at the intersection of hardware, software, and advanced manufacturing to solve complex heat management challenges. The environment is fast-paced, innovation-driven, and focused on building reliable systems for mission-critical applications.

The Role

Phasic prints heat exchangers for data center cooling, each one a single piece of metal. They are not stamped or brazed parts. They are large and thin-walled, full of internal channels, and they push what laser powder bed fusion can reliably produce.

You own how they get printed. That runs from the first R&D test coupon to a finished, inspected unit ready to leave our manufacturing partner's dock (ex-works). Orientation, supports, nesting, parameters, powder and the post-print sequence are all yours. Shipping and delivery are handled by others.

The work happens in two places. In our new lab near BWI, you and the operations team stand up an in-house metal L-PBF cell and use it to prove out new designs. With our overseas manufacturing partner, you carry those designs into production and keep driving print time, cost and yield in the right direction.

You are not the thermal engineer. Our engineers design the heat transfer. You make their designs printable, then make them cheaper, lighter and faster to print, and you lead the operational work to get there. This is not a supplier management job.

What You'll Do

Stand up the lab

• With the operations team, commission our L-PBF printer cell: installation, acceptance, powder handling, inert gas and safety.

• Write the operating procedures for printing, powder management and post-print work.

• Work hands-on at the machine alongside our lab technician, who handles daily operation and machining.

• Run test coupons and prototype builds in-house so new designs are proven before they reach production.

Design for additive

• Work side by side with our thermal engineers to make each design printable: wall and channel limits, overhangs, supports, powder removal from internal channels, distortion and residual stress.

• Lead the operational push on yield, lightweighting and print time. Know which change in geometry, orientation or parameters buys the most.

• Turn every build into something engineering can use: what failed, why, and what the design rule should be.

Own the partner, R&D to ex-works

• Be the technical owner of our printing relationship with our manufacturing partner: parameter approval, test coupon campaigns, first articles and production runs.

• Assemble the build authorization package before any build starts: final CAD, material specs, post-print sequence and acceptance criteria, passed through an internal review gate.

• Hold process consistency across multi-unit orders: same parameters, same powder lot or documented requalification, same orientation, and test coupons on every plate.

• Oversee the post-print chain: depowdering, plate and support removal, heat treatment, CT scanning, leak and pressure testing, and cleaning. Approve the documentation that ships with every unit.

• Take nonconformances to root cause and corrective action. Reject builds that miss spec.

Drive cost, yield and print time

• Know the cost stack of a printed part: machine hours, powder, gas, post-processing, inspection and scrap. Find the levers and pull them.

• Track and report yield, first-pass rate, print time per unit, cost per unit and nonconformance rate.

• Bring the technical case to pricing conversations with our partner.

• Down the road, help shape Phasic's own production facility with what you learn.

What You Bring

Required

• BS in Mechanical, Materials or Manufacturing Engineering, or similar.

• 5+ years hands-on with metal L-PBF in production or advanced R&D, on large-format, multi-laser machines (build envelopes of roughly 400 mm and up). Polymer, binder jet and small-format experience does not count toward this.

• Design for additive in practice. You have changed a design to make it print, and you can show what it bought in yield, weight, time or cost.

• Build preparation and parameter work: orientation, support strategy, nesting, laser assignment, and parameter development or tuning.

• Post-print and quality: stress relief and heat treatment, powder removal from internal channels, CT and leak testing, NCRs and root cause.

• Experience holding an outside manufacturer or service bureau to spec.

• Comfort building process where none exists yet.

Nice to have

• Stainless steel or nickel alloys. Thin-wall, internal-channel parts such as heat exchangers, cold plates, manifolds or injectors.

• Commissioning a metal AM cell: install, powder handling, inert gas and safety.

• Build simulation for distortion and supports.

• Aerospace, defense, energy or other high-consequence metal parts.

Where You Work

• On site at our lab near BWI, 2 to 3 days a week. Anywhere within commuting range, roughly Philadelphia to Arlington, VA, works. Further than that does not.

• Our partner is overseas. Expect some early or late calls, and one or two international trips a year.

Why Phasic

• Join as an early hire and own real outcomes from day one.

• Get meaningful early-stage equity and the chance to build value over years, not quarters.

• Work on a hard, high-leverage problem at the intersection of physics, manufacturing and AI infrastructure.

• Be part of a team that values craft, speed with rigor, and straightforward feedback.