Acoustic and Audio Test Engineer

Andrews Cooper Technology LLC; Redmond (WA); On-site; USD 104,000 - 175,000; Full time

Benefits offered by this job

Medical, dental, life, and disability

Health savings accounts (HSA)

Paid maternity/paternity leave

Generous PTO and holidays

In-office snacks and sponsored lunches

401k with 3% employer contribution

Educational reimbursement

Job summary

Andrews Cooper Technology LLC seeks a Senior Electrical Test Engineer to join the Redmond lab, solving complex acoustic verification challenges for consumer electronics. You will develop and execute validation tests, verify audio electronics, and coordinate technical programs across sites.

Join a people-first culture with on-site collaboration in Redmond, WA, and opportunities to work with leading technology partners. Travel up to 20% may be required.

Qualifications

• B.S. in Electrical Engineering from an accredited university or equivalent experience in a related field.
• 2–6 years hands-on professional experience in test and verification for consumer electronics.
• Strong understanding of verification and validation at the system level, in addition to component and board level.
• Acoustic verification is the primary focus of this role: anechoic chambers, head and torso simulators, microphone and speaker measurement, and hands-on execution of acoustic validation tests.
• Acoustic test development: translating a requirement into a validation test, establishing that the measurement method is sound, and documenting the procedure for repeatable execution by others.
• written communication: ability to write test procedures, reports, and maintain day-to-day coordination with teams across multiple sites and time zones.

Responsibilities

• This position works in a lab environment on new innovative products for the consumer electronics space, in a fast-paced environment with evolving requirements.
• The role is weighted approximately 60% acoustic test development and execution of validation tests, 20% audio electronics verification, and 20% technical program management.
• Test plans generally already exist and are usually modified by others; this role reviews them for technical accuracy and correctly interprets their intent.
• Where acoustic coverage does not yet exist, this role builds the test and the fixture, and revises existing methods as requirements change.

Skills

Acoustic verification

Test plan execution

Root cause analysis

Written communication

Travel readiness

Automation knowledge

Education

Bachelor's degree in Electrical Engineering

Tools

Audio Precision

Listen Inc. SoundCheck

HEAD acoustics ACQUA / LabCore

Oscilloscope

Multimeter

Power supply

Logic analyzer

Job description

SENIOR ELECTRICAL TEST ENGINEER IN REDMOND, WA

At Andrews Cooper, we specialize in delivering cutting-edge engineering solutions in the HardTech space, partnering with industry leaders in Consumer Technology, Medical Technology, Clean Technology, and Automation & Robotics. With a mission to solve novel, ambiguous challenges, we help our customers achieve significant differentiation and success in their industries. Our people-first culture is built on the core values of Own It, Help Each Other Win, and Be Cool, creating an environment where engineers can build fulfilling careers while delivering exceptional work.

The Core Values we embody:

• Help Each Other Win—AC values winning as a team over personal recognition. Go out of your way to help a teammate and the team succeed.
• Own It—Don’t wait for someone else to clear the way. Recognize opportunities to improve, and when obstacles arise, join forces to overcome them.
• Be Cool—Be self-aware, maintain a positive attitude, prioritize emotional intelligence, and maintain composure under pressure.

If you’re passionate about solving complex engineering problems, collaborating with forward-thinking teams, and making an impact in the world of Hardware Technology, Andrews Cooper is the place for you.

BASIC QUALIFICATIONS:

• B.S. in Electrical Engineering from an accredited university or equivalent experience in a related field.
• 2–6 years hands-on professional experience in test and verification for consumer electronics. Target range, not a hard requirement.
• Strong understanding of verification and validation at the system level, in addition to component and board level.
• Acoustic verification is the primary focus of this role: anechoic chambers, head and torso simulators, microphone and speaker measurement, and hands-on execution of acoustic validation tests.
• Acoustic test development: translating a requirement into a validation test, establishing that the measurement method is sound, and documenting the procedure for repeatable execution by others.
• Audio and acoustic analysis platforms: Audio Precision, Listen Inc. SoundCheck, HEAD acoustics ACQUA / LabCore.
• Audio electronics verification at the board level — speakers, microphones, codecs, amplifiers.
• Measurement rigor: calibration, noise floor, fixture and positioning effects, repeatability, measurement uncertainty.
• Able to create, modify, interpret, review, and execute test plans, and guide others through them.
• Low-speed interfaces as used in wearable consumer devices: I2C, I3C, SPI, UART, GPIO, and audio interfaces (I2S / TDM). Register-level configuration from device datasheets.
• Bench instrumentation: oscilloscope, multimeter, power supply, logic analyzer.
• Root cause analysis and failure diagnostics, including isolating whether a failure originates in the electrical path, the transducer, or the fixture.
• Written communication: ability to write test procedures, reports, and maintain day-to-day coordination with teams across multiple sites and time zones.
• On-site in Redmond, WA. Not open to fully remote work.
• Travel as needed; access to reliable transportation required.
• Legally authorized to work in the U.S. without sponsorship. Background check required.
• Up to 20% of travel may be required between locations.
• Ability to travel for work-related purposes as needed; access to reliable transportation is required due to the nature of our business and multiple client sites.
• Must be legally authorized to work in the U.S. without sponsorship.
• Background checks are required.

PREFERRED QUALIFICATIONS:

• Technical program management: coordinating across the audio development teams and the teams executing verification including logistics, timelines, and issue resolution.
• Willing to learn across all three verification disciplines — electrical, audio electrical, and acoustic — and able to work largely autonomously with minimal supervision after onboarding ramp-up.
• We value self-sufficiency and organization. As you ramp up, the expectation will be to document key processes, tools, and lessons learned so they can easily be revisited later, allowing coaching conversations to build on prior discussions.
• Demonstrated appetite for learning new measurement domains.
• New product introduction experience across EVT, DVT, and PVT build.

RESPONSIBILITIES:

• This position works in a lab environment on new innovative products for the consumer electronics space, in a fast-paced environment with evolving requirements.
• The role is weighted approximately 60% acoustic test development and execution of validation tests, 20% audio electronics verification, and 20% technical program management.
• Test plans generally already exist and are usually modified by others; this role reviews them for technical accuracy and correctly interprets their intent. Where acoustic coverage does not yet exist, this role builds the test and the fixture, and revises existing methods as requirements change.
• Partner teams at other sites own the execution of electrical and audio electronics verification. This role coordinates that work with the verification lead — tracking issues raised against partner teams and reporting their status through written follow-up and task tracking across time zones. Audio electronics verification is also run directly by this role where the need arises.

Why join the Andrews Cooper team? This is a full-time position with compensation, benefits, and work positives, including:

• Medical, dental, life, and disability insurance; health savings accounts (HSA), flexible spending accounts (FSA), employee assistance programs (EAP), and dependent savings accounts (DSA).
• Paid leave for maternity and paternity for birth or adoption.
• Generous PTO for vacation, sick, community service, and 8 paid holidays.
• In-office snacks, coffee, and sponsored lunches.
• 401k retirement plan with 3% employer contribution.
• Access to hands-on mentorship to advance professional skills and an educational reimbursement.

The salary range for this position is based on national rates. Exact compensation may vary based on skills, experience, and location. Base Salary: $104,000.00 - $175,000.00. Andrews Cooper is an equal-opportunity employer.