3rd Shift Process Techinician

Entertimeonline; Monticello (MN); On-site; USD 34,000 - 44,000; Full time

Benefits offered by this job

Sign-on bonus

Job summary

Entertimeonline in Monticello, MN is hiring a Process Technician for 3rd shift to start up injection molding machines and ensure process parameters meet job specifications and quality standards. You will monitor alarms, adjust robots, troubleshoot issues, and document changes to ensure repeatable results.

Ideal candidates have at least 2 years of injection molding experience, a high school diploma, and strong communication, math, and computer skills. A $2,500 sign-on bonus is offered.

Qualifications

• Requires high school-level education, with demonstrated technical ability.
• Strong problem-solving skills and mechanical aptitude.
• Ability to stay organized and multitask in a fast-paced setting.
• Clear communication and teamwork capabilities are essential.
• Basic math and computer literacy are required.

Responsibilities

• Start up injection molding machines per shift following the production plan.
• Respond quickly to machine, robot, or equipment alarms.
• Cycle and adjust robots/pickers while maintaining tooling.
• Troubleshoot process and quality issues.
• Keep mold cleaning schedules during shifts.
• Document process changes and improve procedures for repeatability.
• Monitor cycle times and scrap within target ranges.
• Collaborate with engineering on process and equipment improvements.
• Provide direction to setup technicians and serve as backup as needed.
• Perform any other duties as assigned.

Skills

Technical aptitude

Problem solving

Organizational skills

Multi-tasking

Communication skills

Math skills

Computer skills

Education

High school diploma

Job description

• Location 200 Chelsea Road,Monticello, MN, 55362,United States
• Base Pay $25.00 - $32.00 / Hour
• Employee Type Full Time
• Required Degree High school
• Manage Others No

$2500 Sign on Bonus!

Job Title:

Process Technician

Shift:

3rd shift, 10:00pm-6:30am M-F

Overview:

Responsible for production start-up of injection molding machines, ensuring process parameters for each job/work order are correct and quality control requirements are met.

Requirements:

• High School Diploma or GED preferred
• Requires a minimum of 2 years injection molding processing experience and/or training
• Demonstrate understanding of various plastic resins, including their properties, handling requirements, and proper identification to ensure correct material usage and maintain product quality.
• Strong technical aptitude and problem-solving skills
• Strong organizational skills and ability to multi-task
• Effective communication skills
• Basic math and computer skills
• Safety shoes are required for this position and are eligible for reimbursement per the Company’s Safety Footwear Reimbursement policy.
• Employee must supply own hand tools when performing this position.

Responsibilities:

• Perform start-up of injection molding machines throughout shift, adhering to production schedule.
• Respond to machine, robot or auxiliary equipment alarms promptly
• Cycle and adjust robots/pickers as required while maintaining end-of-arm tooling.
• Troubleshoot process and quality issues.
• Ensure mold cleaning schedules are adhered to during the production shift.
• Document daily process changes, improvements, and update process documents when changes are made to ensure repeatability.
• Ensure cycle times and scrap rates are within identified range.
• Partner with engineering on continuous improvement of processes and equipment, including improved work flows, use of fixtures, auxiliary equipment and automation.
• Provide work direction to set-up technicians as needed.
• Serve as back-up set-up technician as needed.
• Any other duties as assigned

Requirements

PHYSICAL DEMANDS AND WORKING CONDITIONS

LIFTING CATEGORY

Definitions:Infrequently – 1% to 33% of time

Frequently – 33% to 66% of time

Light LiftingLifts 20 lbs. infrequently

Lifts 10 lbs. or less, frequently

Medium LiftingLifts 50 lbs. infrequently

Lifts 20 lbs. or less, frequently

XHeavy LiftingLifts 100 lbs. infrequently

Lifts 50 lbs. or less, frequently

Very Heavy LiftingLifts in excess of 100 lbs. infrequently

Lifts 50-100 lbs. frequently

LIFTING REQUIREMENTS

Weight: Enter the number describing the weight in pounds, of the heaviest item the employee is required to handle routinely.

Frequency: Using the percentages below, assess time involved (in a regular scheduled shift) of lifting these weights.

1 = None 2 = 1-9% 3 = 10-19% 4 = 20-33% 5 = 34-66% 6 = 67-100%

DescriptionWeightFrequencyComments

Above shoulder (63” to 30”)25#5

Desk to chair level (30” to 18”)50#4

Chair to floor level (18” to 0”)70#6

Other:

Carrying: 50#4

Pushing at height of 54” Barrel200#6Pallet Jack used

Pulling at height of 54” Barrel200#6Pallet Jack used

PHYSICAL DEMANDS

Frequency: Using the percentages below, assess time involved (in a regular scheduled shift).

1 = None 2 = 1-9% 3 = 10-19% 4 = 20-33% 5 = 34-66% 6 = 67-100%

DescriptionFrequencyComments

Reaching overhead5

Climbing6

Standing5

Walking on even surfaces6

Running1

Repetitive Motions4

Twisting6

Kneeling3

Reaching Forward5

Firm Grasping5

Other Activities (specify):

ENVIRONMENT

Frequency: Using the percentages below, assess time involved (in a regular scheduled shift):

1 = None 2 = 1-9% 3 = 10-19% 4 = 20-33% 5 = 34-66% 6 = 67-100%

DescriptionFrequencyComments

% Time in a vehicle1

EXPOSURES

Frequency: Using the percentages below, assess time involved (in a regular scheduled shift).

1 = None 2 = 1-9% 3 = 10-19% 4 = 20-33% 5 = 34-66% 6 = 67-100%

DescriptionFrequencyComments

Chemicals2Isopropyl Alcohol and mold release agents are the only chemicals used. Both are non-hazardous.

Gases1

Infectious Diseases1

Radiation1

Noise6Normal manufacturing floor noise. General noise level is safely below OSHA decibel thresholds.

Fumes6Normal off-gassing of plastic resin due to molding process, which is non-hazardous

Vibrations6Normal machine/equipment operational vibrations.

Dust6

Mechanical Hazards6Related to the machines/equipment

Electrical Hazards6Related to the machines/equipment

Hot6Temperature of heated resin and molded plastic of parts

Cold2Ice blaster is infrequently used, depending on the job. Proper PPE (i.e., gloves, hearing protection is used).

Humid3

Wet3Only if machine/equipment has leaked water or oil

Dry4Resin/material dryers emit small amount of dry air.