3D Scanning Technician (Artec Leo) — Sioux Falls, SD

Construction Material Testing; Sioux Falls (SD); Vor Ort; USD 36.000 - 55.000; Vollzeit

Zusammenfassung

Construction Material Testing in Sioux Falls is seeking a 3D scanning technician to operate handheld Artec Leo and process scans into meshes, reports, and scan‑to‑CAD files for client use.

You will plan on-site scans of rebar, embeds, pipes, and concrete elements, verify data on site, coordinate access and safety, and travel to regional hubs as assignments arise; prior handheld scanner experience and CAD familiarity are required.

Qualifikationen

• Operate handheld 3D scanners on real projects and provideExamples;
• Knowledge of Artec Studio or similar software for processing scans;
• Familiarity with reading structural or fabrication drawings;
• Comfort on active construction sites and travel as needed;
• Valid driver's license with acceptable record;
• Experience with scan-to-CAD or metrology software a plus;
• Certifications such as ACI/ICC are a plus and sponsor-ready.

Aufgaben

• Plan and execute handheld scans of rebar and embeds before concrete placement;
• Control drift on large objects with reference features and overlapping zones;
• Verify capture completeness on site before leaving;
• Process scans in Artec Studio: registration, fusion, and mesh cleanup;
• Export to STL, OBJ, E57, and CAD formats;
• Produce deviation maps, measurement reports, and anchor bolt reports;
• Build scan-to-CAD solids for reverse engineering;
• Document capture procedure and chain of custody on forensic matters;
• Coordinate access, permits, and safety with site contacts;
• Travel to regional hubs as assigned.

Kenntnisse

Handheld scanner

On-site operations

Reading drawings

Travel availability

Driver's license

Tools

Artec Studio

SolidWorks

Fusion 360

Inventor

Revit

Geomagic Design X

Jobbeschreibung

3D scanning technicians run the Artec Leo for our handheld scanning line. One day you are scanning a rebar mat and anchor bolt cluster before a pour, the next a corroded pipe spool at a Ship Channel plant, a cracked beam for an insurance adjuster, or a worn impeller a machine shop needs rebuilt in CAD. You capture the data, check it on site, process it in Artec Studio, and deliver meshes, point clouds, measurement reports, and scan-to-CAD files the client can act on. This is a trained-operator position: you have run a handheld structured-light or laser scanner and processed the data before, and you can show us the work.

Responsibilities

• Plan and execute handheld 3D scans of rebar and embeds before concrete placement, failed and damaged structures, corroded pipe and tanks, fabricated steel and precast, machine parts, and modular units.
• Control drift on large objects with reference features, tape-measure backbones, and overlapping zones.
• Verify capture completeness on site before leaving.
• Process scans in Artec Studio: registration, fusion, mesh cleanup, texture, and export to STL, OBJ, E57, and CAD formats.
• Produce deviation color maps, measurement reports, crack maps, pit-depth tables, and anchor bolt coordinate reports against drawings or CAD.
• Build scan-to-CAD solids (STEP/IGES) for reverse engineering and fit-up checks, or hand clean meshes to the modeling team.
• Document capture procedure, equipment settings, and chain of custody on forensic matters.
• Keep the scanner, batteries, and calibration records in order.
• Coordinate access, permits, and safety with superintendents and plant contacts.
• Travel to regional hubs as assigned.

Qualifications

• Hands-on experience operating a handheld structured-light or laser scanner (Artec Leo, Eva, or Space Spider; Creaform HandySCAN; FARO; or equivalent) on real projects — bring examples;
• Working knowledge of Artec Studio or comparable scan-processing software; mesh cleanup, registration, and export;
• Familiarity with CAD (SolidWorks, Fusion, Inventor, or Revit) and with reading structural or fabrication drawings;
• Comfortable on active construction sites and in industrial plants; able to carry equipment, climb, and work outdoors;
• Valid driver's license with an acceptable record;
• Able to travel and fly with equipment as assigned;
• Experience with scan-to-CAD, Geomagic Design X, or metrology reporting a plus;
• ACI, NICET, or ICC certifications a plus — we sponsor them.

What a week in this job looks like:

Monday you are on an elevated slab in the Energy Corridor an hour before the pour, scanning the mat, the embeds, and the anchor bolt templates while the special inspector finishes the walk, then back at the office overlaying the scan on the structural drawings so the superintendent has the out-of-tolerance list before the trucks line up. Tuesday is a dig site east of Baytown: a cleaned pipe surface, an open excavation, and a corrosion map that has to be finished before the coating crew closes it up. Later in the week a machine shop drops off a worn impeller with no drawing, an adjuster asks for a cracked parking garage beam to be scanned before the shoring goes in, and a modular builder in Conroe wants the as-built of a container unit captured before it ships Friday. Every one of those jobs ends the same way: data checked on site, processed in Artec Studio, and delivered in a format the client opens without calling us.

Training, certifications, and where this leads:

You arrive knowing how to run a handheld scanner; we train you on our capture procedures for each service, our drift-control method for container-size objects, our report templates, and the construction and plant context the scans live in. Technicians who want the construction side pick up ACI Concrete Field Testing Grade I and ICC special inspector certifications, paid for by the company, so the pre-pour scan and the special inspection can be one visit. Technicians who want the industrial side move toward coatings inspection (AMPP CIP) and metrology reporting. This is a new service line and the people who build it will run it. The path is scanning technician to lead technician, then to a regional scanning role at one of our hubs or into project management as the line grows.

Pay, schedule, and travel:

Pay runs $26 to $40 per hour depending on demonstrated scanning and processing skill, CAD ability, and certifications held; the position is hourly with overtime when pours and plant windows run long. Houston-area work dispatches from our Sugar Land headquarters and covers the metro and the Gulf Coast plants. Projects elsewhere are staffed through our regional hubs on a project basis, with travel and per-diem arrangements set out before you commit to a trip. The scanner flies as carry-on, and so do you; expect some weeks on the road when a fabrication yard or plant program in another state is running.

Safety, quality, and the standards we work under:

You will work on active jobsites and inside operating plants under their permit, escort, and lockout rules, with the site safety orientation and personal protective equipment each one requires. Forensic matters add a chain-of-custody discipline: every capture is logged with equipment, settings, and procedure so the person who took the scan can describe it under oath. Scan accuracy is stated on every deliverable, not assumed from the brochure. Reports against drawings use the tolerance the specification actually calls for — ACI 117 for rebar placement, AISC and AWS for fabricated steel, the client's own tolerance for fit-up — and the quality system that backs our materials testing reports backs these too.

How hiring works, and our commitment:

The role requires a valid driver's license with an acceptable record, the ability to carry and operate scanning equipment on active jobsites and in plants, and pre-employment screening consistent with jobsite and client requirements.

We are an equal opportunity employer. Every applicant is considered without regard to race, color, religion, national origin, age, sex, sexual orientation, gender identity, disability, or veteran status. What we care about is whether the scan is complete, the number is right, and the client can open the file.