Senior Piping Engineer

Seatrium Ltd; Singapore; Sur place; SGD 90 000 - 130 000; Plein temps

Résumé du poste

Seatrium Ltd in Singapore seeks a Hull Process Engineer to develop and size systems for hulls and topsides, ensure NPSH verification and piping sizing, and create PFDs/UFDs. You will integrate safety requirements into design documents and liaise with vendors and other disciplines.

The role requires a bachelor’s degree in chemical or mechanical engineering, with 5+ years in hull process engineering, preferably on FPSO/marine projects.

Qualifications

• Bachelor degree in Chemical or Mechanical Engineering is required.
• At least 5 years of Hull Process engineering experience preferred.
• Experience in FPSO topsides & marine projects is advantageous.
• Experience in Offshore/Shipyard projects (Rig building/Ship building) is preferred.

Responsabilités

• Understand contract and scope of work and extract requirements into a checklist.
• Follow up FEED, P&IDs developed by consultant.
• Perform equipment sizing for pump flow rate and pumping head with NPSH verification.
• Size piping lines and develop system UFD/PFD.
• Create System Process Data Sheet and Hull common systems design in P&ID.
• Incorporate safety study recommendations into P&IDs and related documents.
• Review vendor proposals and vendor certified documents for valves, PSVs, etc.
• Coordinate with other disciplines for process design information.
• Understand safety drawings and documents (Safety Plan, Area Classification, etc.).
• Carry out Hull Process related studies and prepare official reports.
• Support commissioning activities and troubleshoot system performance.

Connaissances

Hull Process Engineering

Process simulation

Formation

Bachelor Degree in Chemical or Mechanical Engineering

Outils

PRO-II / HYSYS Process Simulator

Flowmaster

AutoCAD

MS Office

Description du poste

• Understand contract and scope of work (i.e. SOW) and extracting the contract requirement into the checklist.
• Follow up FEED, P&IDs developed by consultant.
• Able to perform equipment sizing for pump required flow rate and pumping head together with NPSH verification.
• Able to perform piping line sizing.
• Able to develop system UFD/PFD.
• Able to create System Process Data Sheet.
• Develop/Update FPSO Hull common system related Topside, Safety, Hull marine systems in P&ID.
• Well understanding of common Class requirement such as ABS, LR and DNV Rules for marine system design.
• Well understanding of Equipment Isolation Philosophy and Specification from client.
• Well understanding of common piping material selection and application for marine system design as reference to International Standard.
• Able to incorporate the recommendations from the safety studies into the P&IDs and other relevant documents
• Able to review/comments technical proposal and vendor certified documents (VCD) from vendor (i.e. control valves specifications, PSVs specifications, etc.)
• Liaise with other discipline for relevant information that are needed for process design.
• Able to understand safety related drawing & documents (e.g. Safety Plan, Area Classification, Safety Signaling, Technical Specification for safety equipments, HSE Manual, Hydrant Location Study etc).
• Understand P&IDs and other related process, safety & instrumentation items
• Well understanding of the galvanic corrosion phenomena in the system design and able to avoid or resolve the galvanic corrosion related problems.
• Define control narrative and alarm set point for the instruments.
• System descriptions & all other kind of OIM (operation & maintenance manual)
• Sizing calculations (i.e. PSVs calculation, BDV calculations, SDV calculation, Control valves calculation)
• Carry out Hull Process related studies and prepare official report.
• Good knowledge in process simulation (PRO-II / HYSYS process simulator)
• Familiar System Design Safe Chart, Cause & Effect Matrix, Narrative Control Logic.
• Having knowledge to evaluate the relevant safety studies in FPSO design (i.e. HAZOP, HAZID,Radiation Study, Fire Explosion Study).
• Understanding of Working Environment Requirement and Human Ergonomic Design.
• Support commissioning activities and troubleshooting of system performance related issues.
• Able to perform Hull Process related activities with no or minimum supervision.
• Min.Bachelor Degree in Chemical or Mechanical Engineering
• SPPID, PRO-II / HYSYS Process Simulator, Flowmaster, AutoCAD, MS Office
• Prefer to have at least 5 years of Hull Process engineering related working experience or similar activities as describe above
• Prefer to have experience in FPSO project, both topsides & marine.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building

Our Address and Working Hours:

Tuas Boulevard Yard

80 Tuas S Blvd, Singapore 637051

Islandwide transport provided

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.