Fire Equipment Technician

Readiness Management Sup; Al Rayyan; On-site; QAR 328,000 - 437,000; Full time

Job summary

Readiness Management Sup is seeking an experienced technician to service, test, and certify hydraulic rescue tools and SCBA equipment in demanding environments. The role includes inspecting cylinders, masks, and related gear, with emphasis on safety and regulatory compliance.

Candidates should have a HS diploma and at least five years of Fire/Rescue equipment maintenance experience, plus relevant certifications to operate and test life-support systems, with readiness for deployments to Qatar.

Qualifications

• HS Diploma or equivalent with 5 years in Fire/Rescue equipment maintenance.
• Trained to operate halon recovery and recycle systems.
• Experience repairing high‑pressure air compressors as per manufacturer.

Responsibilities

• Service, clean, test, and check hydraulic tools and pumps.
• Inspect and recertify SCBA components and cylinders.
• Inspect, test, and maintain compressors and refill stations.
• Perform visual inspections and maintenance on J-Fire masks and suits.
• Conduct SCBA inspections, testing, maintenance, and recertification.

Skills

Fire/Rescue Equipment Maintenance

Safety compliance

Manual dexterity

Education

HS Diploma or equivalent

Tools

Hurst Rescue Equipment

MSA Level A

DOT hydro test certification

NFPA 1071

NFPA 10

NFPA 1932

Holmatro Rescue Equipment

MSA M7 Responder

HazMat Certification

Job description

ESSENTIAL JOB FUNCTIONS

• Hurst and Holmatro Hydraulic Rescue Tools: Service, clean, test, and check all functions, valves, pressure relief valves, hydraulic pumps, prime movers (gas, diesel or electric) for wear/damage; and service and pressure test before returning to service.
• Cylinders: Perform inspections, testing, maintenance and recertification (Hydrostatic Test) of all components of MSA Air Carts including batteries, full electronic testing of pressure sensitive alarms, all cylinders are visually inspected, repair outer jackets if found to be damaged, pressure gauges are test and refilled (glycol) if needed, all valves are operationally tested and serviced if worn.
• Compressors: Inspect, test, and perform maintenance of SCBA compressors and refill stations, storage trailers and gas boosters or decanting systems. Service motor/engines, purification/drying systems, controls, air/gas storage systems, charging stations, and air monitoring equipment.
• A-Level and B-Level Suits & J-Fire Masks: Conduct visual inspections, testing, perform preventative maintenance and cleaning for the J-Fire CW Mask. Inspect, service, test, and re-certify all level A and Level B suits.
• Self-Contained Breathing Apparatus (SCBA): Perform inspections, testing, maintenance, and recertification of the Self-Contained Breathing Apparatus (SCBA) and Mine Safety Appliance (MSA) units.

HS Diploma or equivalent is required, with 5 years’ related experience with Fire/Rescue Equipment Maintenance preferred. Trained and experienced to operate halon recovery and recycle system preferred. Trained and experienced to repair high pressure air compressors as required by the manufacturer preferred.

LICENSE & CERTIFICATIONS

• (WILL BE OBTAINED) HURST Rescue Equipment Certificate of Competency to Inspect.
• MSA Level “A” certified to perform training class.
• United States Department of Transportation (DOT) certified to hydro test compressed gas cylinders/tanks.
• Certified in MSA R.I.TE. and MultiRAE Air Monitors Detectors.
• Bauer level 1 and 2 Certification.
• MSA M7 Responder Level “B” certified to perform SCBA maintenance.
• HOLMATRO Rescue Equipment Certificate of Competency to Inspect.
• NFPA 1071 certified or equivalent.
• NFPA 10 Certified.
• NFPA 1932 Certified.
• HazMat Certificate of Competency to Inspect.

Knowledgeable in Principles of Mine Safety Appliances (MSA) Self Contained Breathing Apparatus (SCBA), ladder, hose, structural and/or ARFF testing. Must have knowledge in National Fire Protection Agency regulations and standards.

ADDITIONAL REQUIREMENTS

• Valid Driver’s License and be able to operate a vehicle with a manual transmission.
• Possess a valid U.S. Passport.
• Must be able to meet all current USCENTCOM Deployment Policy Requirements, as outlined in the USCENTCOM MOD EIGHTEEN TO USCENTCOM INDIVIDUAL AND INDIVIDUAL UNIT DEPLOYMENT POLICY.
• Able to obtain and maintain a valid Driver’s License and Residency Visa for Host Nation.
• Must be able to work in extreme environmental conditions including dust and high temperatures.
• Must be able to endure long hours, exposure to weather and hazardous conditions.
• Must be able to lift up to 50 pounds.

TRAVEL

Deployed to Qatar, will travel to multiple locations.

SECURITY CLEARANCE

Active DoD SECRET clearance

EEO / DEI

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.