CADD TECHNICIAN [CADD DESIGNER]

Management Solutions International

Doha

On-site

QAR 167,000 - 312,000

Full time

3 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Management Solutions International is seeking an experienced CADD Designer (Piping/Civil/Electrical/Instrumentation) with 8+ years in brownfield Oil & Gas projects. The candidate will prepare 2D & 3D piping GA, layouts, isometrics, and 3D models using MicroStation, Descartes, AutoCAD, Navisworks, S3D/SP3D, and SPPID, while adhering to SID practices.

The role requires the ability to work independently in office and field settings, knowledge of QChem/CPChem standards, and the capability to review

Qualifications

  • Diploma or Bachelor’s degree in Mechanical/Civil/Electrical/Instrumentation & Control engineering; 8+ years of brownfield Oil & Gas CADD design experience.
  • Relevant design using CADD tools and certification.
  • Proficiency in Bentley MicroStation & Descartes, AutoCAD, Navisworks, Intergraph S3D & SPPID.
  • Ability to work independently; office and field-based tasks.
  • Knowledge of Safety in Design (SID).

Responsibilities

  • Design and develop Piping deliverables: 2D/3D GA, equipment layout, piping isometrics, and supports per QChem/CPChem standards.
  • Develop 3D models in S3D/SP3D; ensure clash-free design and extract piping deliverables.
  • Civil/Structural deliverables: 2D/3D designs for platforms, racks, foundations, and drawings per QChem/CPChem standards.
  • Electrical deliverables: cable layouts, single line diagrams, MCCs, drawings in 2D/3D; SID-aware.
  • Instrumentation deliverables: LOOP drawings, I/O lists, instrument schematics; SID-compliant.
  • Review contractor/vendor drawings; support engineers to complete design activities on time.

Skills

Piping design
Civil/Structural design
Electrical design
Instrumentation design
3D modeling
Clash detection

Education

Diploma in Mechanical/Civil/Electrical/Instrumentation & Control Engineering
Bachelor’s Degree in Mechanical/Civil/Electrical/Instrumentation & Control Engineering

Tools

Bentley MicroStation
Bentley Descartes
AutoCAD
Navisworks
Intergraph S3D
SPPID

Job description

Job description

CADD DESIGNER (Piping / Civil / Electrical / Instrumentation) Minimum Qualification Required: Diploma in Mechanical/Civil/Electrical/Instrumentation & Control Engineering Preferred: Bachelor’s Degree in Mechanical/Civil/Electrical/Instrumentation & Control Engineering. Minimum Work Experience 8 years of experience with reputed engineering firms in the brownfield Oil &Gas projects as CADD Designer – Specialist/Expert Relevant Certification in Design using CADD Tools Able to work independently and willing to work both office and field-based tasks. Proficiency in the design and drawing preparation in multiple plant projects. Expertise in using Bentley - MicroStation & Descartes, Autodesk - AutoCAD & Navisworks, Intergraph S3D & SPPID. Job Description (but not limited to) Piping: Design and development of all types of Piping design deliverables such as, but not limited to preparing 2D & 3D designs of Piping General Arrangements, equipment layout, piping isometrics, pipe support layouts etc. as per QChem/ CPChem standards. Develop 3D models in S3D/SP3D, ensure clash free design and extraction of all Piping and other relevant deliverables. Knowledgeable in Safety in Design (SID). Material Take-Offs of all Piping related items. Perform design verification through single discipline checks (SDC) and/or inter-discipline checks (IDC) Interdisciplinary check of all Civil/Structural/Piping/Mechanical/Electrical/Instrumentation drawings. Gathering data from site for design and development of engineering package and As-builts. Review of Contractor, Vendor and/or Third-Party drawings for Project Design Package. Support the Project and discipline engineers for completing all design activities on time. Has basic level understanding of Process Piping standards such as ASME B31.3. Civil: Design and development of civil & structural related engineering deliverables such as, but not limited to, 2D & 3D designs for, platforms, pipe racks, pipe supports, equipment/building foundations, architectural drawings, steel/concrete beams and columns details, structural connection details, MTOs/BOQs, as builts and other related drawings/documents as per QChem/CPChem standards. Knowledgeable in Safety in Design (SID). 3D modelling in S3D/SP3D, and extraction of all Civil/Structural and other relevant deliverables. Material Take-Offs of all concrete, re-bars and structural related items. Produce underground facilities design package for drainage trench/culverts, valve and other drainage pits. Perform design verification through single discipline checks (SDC) and/or inter-discipline checks (IDC) Interdisciplinary check of all Civil/Structural/Piping/Mechanical/Electrical/Instrumentation drawings. Gathering data from site and develop design package and As-builts. Review of Contractor, Vendor and/or Third-Party drawings for Project Design Package. Support the Project and discipline engineers for completing all design activities on time. Electrical: Design and development of electrical engineering design deliverables as per QChem/ CPChem standards such as, but not limited to: o Cable /trays and cable routing layouts o Cable schedule/ cable list o Consumer/Load list o Single line diagram o Inter-Connection & Wiring Diagram, Control schematic diagram. o Grounding/Earthing layout o Block Diagram and Motor Control Schematics o Electrical Building and Equipment Layout o Lighting layout o Hazardous Area Classification o Preparation of MTOs/BOQs o As-Builts and other related drawings/documents using 2D (MicroStation and AutoCAD) and 3D (e.g.S3D). Material Take-Offs of all Electrical related items/component. Knowledgeable in Safety in Design (SID). Perform design verification through single discipline checks (SDC) and/or inter-discipline checks (IDC) Interdisciplinary check of all Civil/Structural/Piping/Mechanical/Electrical/Instrumentation drawings. Gathering data from site for preparing design package and As-builts. Review of contractor, vendor and/or third-party drawings for project design package. Support the Project and discipline engineers for completing all design activities on time. Has basic knowledge of Electrical related Codes and Standards. Instrumentation: Design and develop Instrumentation engineering design deliverables as per QChem/ CPChem standards such as, but not limited to: o INTOOLS wiring, Loop drawings & Strip report generation. o Instrument Hook-up Diagrams o Instrument and JB Location Plans o Fire and Gas Location Plans o Instrument Cable Block Diagrams o Instrument Index and I/O list o Instrument Cable Schedule Page 45 of 72 o Instrument wiring and loop diagrams o Cabinet drawings update. o Cable /trays and cable routing layouts o Knowledge of Cable Trench and Duct bank sizing calculations. o Knowledge of cable sizing and voltage drop calculations. As-Builts and other related drawings/documents in 2D e.g. MicroStation and AutoCAD. Knowledgeable in Safety in Design (SID). 3D Modelling of Instruments (Offline Process Instruments, F&G Instruments & Telecom instruments) Material Take-Offs of all Instrumentation related items/component. Perform design verification through single discipline checks (SDC) and/or inter-discipline checks (IDC) Interdisciplinary check of all Civil/Structural/Piping/Mechanical/Electrical/Instrumentation drawings. Gathering data from site for preparing design package and As-builts. Review of Contractor, Vendor and or Third-Part drawings for Project Design Package. To assist in the coordination of all Design activities related to the discipline. Has basic level of Instrumentation related International Codes and Standards. Review of Contractor, Vendor and or Third-Part drawings for Project Design Package. To assist in the coordination of all Design activities related to the discipline. Has basic level of Instrumentation related International Codes and Standards.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

CADD Designer - Piping, Civil, Electrical & Instrumentation
CADD Designer - Piping, Civil, Electrical & Instrumentation

Management Solutions International • Doha

On-site
QAR 167,000 - 312,000
Project Manager- Instrumentation
Project Manager- Instrumentation

Qatar Design Consortium • Doha, Al Wakrah, Al Khor

On-site
QAR 600,000 - 1,000,000
Mechanical Supervisor
Mechanical Supervisor

Client of Brunel • Doha

On-site
QAR 120,000 - 180,000
Head of Engineering (Piping – Process)
Head of Engineering (Piping – Process)

Airswift • Doha

On-site
QAR 600,000 - 900,000
Construction Supervisor (Mechanical & Piping)
Construction Supervisor (Mechanical & Piping)

Advanced Search Group • Doha

On-site
QAR 180,000 - 300,000
Principal Installation Analysis Engineer
Principal Installation Analysis Engineer

McDermott • Doha

On-site
QAR 60,000 - 110,000
Project Engineer Instrument and Control - EPC Offshore
Project Engineer Instrument and Control - EPC Offshore

Swan Global • Doha

On-site
QAR 300,000 - 420,000
E3D Administrator
E3D Administrator

Geosoft Surtech • Doha

On-site
QAR 218,419 - 327,629
MECHANICAL ENGINEER [STATIC] (Job Code R157)
MECHANICAL ENGINEER [STATIC] (Job Code R157)

Management Solutions International • Doha

On-site
QAR 300,000 - 520,000
Site Engineers (Piping, Mech, Civil, Electrical)
Site Engineers (Piping, Mech, Civil, Electrical)

Swan Global • Doha

On-site
QAR 180,000 - 280,000
Top locations