PhD position on hermetic packaging of microfluidic sensor chips without glue or elastomers for ventilators and multi-infusion systems

Karlstad University; Enschede; Hybrid; EUR 429,000 - 543,000; Full time

Benefits offered by this job

Four-year contract

Salary according to CAO-NU

8% holiday allowance

8.3% end-of-year bonus

Hybrid/remote work

Sports facilities on campus

Parental leave

Training via Twente Graduate School

Job summary

University of Twente is seeking a PhD candidate for hermetic, glueless packaging of MEMS microfluidic sensor chips intended for ventilators and multi-infusion systems. The project focuses on bonding silicon nitride channels without elastomer seals, addressing biocompatible and inert materials, and challenging environmental conditions.

You will work in the IDS group within EEMCS on advanced packaging research, with supervision and collaboration across departments, contributing to innovations in

Qualifications

• MSc degree in electrical engineering, nanotechnology, applied physics, mechanical engineering, materials science or related field.
• Fluent in English with strong communication skills.
• Interest in microfabrication and MEMS/sensors.
• Ability to work in an interdisciplinary international environment.

Responsibilities

• Develop and evaluate glueless sealing techniques for MEMS microfluidic sensors.
• Plan and conduct bonding experiments; analyze results and iterate designs.
• Collaborate with IDS group in EEMCS for packaging and testing in the MESA+ cleanroom.

Skills

English fluency

Microfabrication

MEMS

Interdisciplinary teamwork

Education

MSc in a relevant field

Tools

Cleanroom

MEMS fabrication

Job description

Select the region that best fits your location or preferences.

This setting controls the language of the user interface, including buttons, menus, and all site text. Select your preferred language for the best browsing experience.

Select the languages for job listings you want to see. This setting determines which job advertisements will be displayed to you.

Swedish

Norsk

Danish

Finnish

German

French

Dutch

Spanish

Job Match Comparison

Compare your profile with the job requirements

Job or profile information is not available.

Why this job matches your profile

We've compared your profile to the job requirements. Here's where they align.

Job or profile information is not available.

You have already applied for this position.For questions regarding your application, please contact the employer.For technical assistance, reach out to our support teamhere .

Thank you for your application! An email confirmation has been sent to your email.

Loading job alert...

Receive job alerts that match your preferences.

Select employers Search and select specific employers to receive job alerts only from them.

PhD position on hermetic packaging of microfluidic sensor chips without glue or elastomers for ventilators and multi-infusion systems

Looking for a job that matters? Join the university of technology that puts people first – and shape new opportunities both for yourself and for ou...

In medical equipment, many different gas flows need to be controlled, including gases such as O2, CO2, He, Xe, Kr, Ar, Ne, N2, N2O, and H2, all in varying concentrations ranging from 0 – 80%. Traces of up to 500 ppm of NO, CO, and H2S could occur in the gas mixture and should be detected. Some applications may require the use of gaseous anaesthetic agents such as isoflurane and desflurane. This also imposes demands on the chemical compatibility of the materials used.

In multi-infusion systems, the flow meters need to measure the amount of liquid pharmaceuticals as well as multiparameter measurements to measure the composition and parameters of the pharmaceuticals. Typical liquids to be administered are noradrenaline, dopamine, dobutamine, morphine, insulin, glucose and saline solution.

Whereas the flow sensors themselves are reaching the point that they can meet the required performance, an essential final problem still needs to be resolved. Namely, the connection of the flow sensor chip to the outside world without elastomer seal or glue, since these wetted materials can pose unacceptable risks in these applications. In breathing systems, elastomers can release volatile substances (VOCs) in the breathing gas path that the patient inhales directly. With multi-infusion systems, unwanted interactions between the glue and the different medications can occur, causing the glue to dissolve or the medication to become ineffective. This issue limits the application of microfluidics in the aforementioned demanding fields. This project aims to find methods to eliminate these urgent packaging issues. As the demand for advanced ventilators and multi-infusion systems grows, finding a suitable “glueless” sealing method will become a key solution in bringing MEMS based microfluidic flow meters to the medical and other markets, driving further innovation in healthcare and related technologies.

The goal of this project is to find a reliable packaging technique for silicon chips with embedded microfluidic channels that does not involve the use of glue or elastomer seals. The project will focus on microfluidic channels with a channel wall of low-stress silicon-rich silicon nitride. The proposed research aims to study the fundamentals of bonding glass or metals to silicon nitride coated silicon wafers as well as accessing the feasibility of using these bonding methods for MEMS-based microfluidic sensor packaging.

The targeted output of the project is a glueless sealing technique which allows to hermetically seal the fluidic channels of a MEMS-based microfluidic sensor to a fluidic adaptor. The seal shall be able to withstand pressures up to 30 bar at a temperature range between -20°C and 70°C. To extend the applicability of the microfluidic sensor, only inert materials for the seal and the adaptor will be considered.

The main challenges are (1) exploring the most promising bonding techniques that should be investigated, (2) carry out bonding experiments and analyse the results (3) design, fabrication and packaging of actual sensor chips in the MESA+ cleanroom and (4) evaluation of the resulting performance in our MEMS measurement lab.

The PhD candidate will work at the Integrated Devices and Systems (IDS) group within the Faculty of Electrical Engineering, Mathematics and Computer Science (EEMCS) at the University of Twente in Enschede, the Netherlands. You will carry out the research at the University of Twente, with guidance from senior scientists and support from a senior engineer. Various teaching activities in your field of expertise may take up to 20% of your time.

Your profile

• You are highly motivated and an enthusiastic researcher.
• You have an MSc degree in electrical engineering, nanotechnology, applied physics, mechanical engineering, materials science, or a related topic, with excellent theoretical and experimental skills.
• You have shown an affinity for microfabrication, electronics, MEMS and/or sensors.
• You have good team spirit and like to work in an interdisciplinary and internationally oriented environment.
• You are fluent in English.

Our offer

• As a PhD candidate at UT, you will be appointed to a full-time position for four years, with a qualifier in the first year, within a very stimulating and exciting scientific environment;
• The University offers a dynamic ecosystem with enthusiastic colleagues;
• Your salary and associated conditions are in accordance with the collective labour agreement for Dutch universities (CAO-NU);
• You will receive a gross monthly salary ranging from € 3.204,- (first year) to € 4.051,- (fourth year);
• There are excellent benefits including a holiday allowance of 8% of the gross annual salary, an end-of-year bonus of 8.3%, and a solid pension scheme;
• The flexibility to work (partially) from home;
• A minimum of 232 leave hours in case of full-time employment based on a formal workweek of 38 hours. A full-time employment in practice means 40 hours a week, therefore resulting in 96 extra leave hours on an annual basis.
• Free access to sports facilities on campus
• A family-friendly institution that offers parental leave (both paid and unpaid);
• You will have a training programme as part of the Twente Graduate School where you and your supervisors will determine a plan for a suitable education and supervision;
• We encourage a high degree of responsibility and independence, while collaborating with close colleagues, researchers and other staff.

Information and application

For more information regarding this position, you are welcome to contact dr. ir. R.J. Wiegerink at [emailprotected] .

Screening is part of the selection process.

About the department

The IDS group is part of the Faculty of Electrical Engineering, Mathematics, and Computer Science. The research group studies electronic and electromechanical components and develops new concepts for nanoscale materials, devices and systems using nano- and microfabrication techniques. One ambition of the IDS group is to combine its experience in both semiconductor and MEMS technologies to design, fabricate and characterise novel smart sensing devices.

IDS contributes to the MESA+ Institute and has a strong track records in knowledge transfers to the semiconductor industry. MESA+ is the largest research institute of the University of Twente. The institute trains graduate students and PhD-students and conducts research in the fields of nanotechnology, microsystems, materials science and microelectronics. Unique of MESA+ is its multidisciplinary composition.

About the organisation

The faculty of Electrical Engineering, Mathematics and Computer Science (EEMCS) uses mathematics, electronics and computer technology to contribute to the development of Information and Communication Technology (ICT). With ICT present in almost every device and product we use nowadays, we embrace our role as contributors to a broad range of societal activities and as pioneers of tomorrow's digital society. As part of atech university that aims to shape society, individuals and connections, our faculty works together intensively with industrial partners and researchers in the Netherlands and abroad, and conducts extensive research for external commissioning parties and funders. Our research has a high profile both in the Netherlands and internationally. It has been accommodated in three multidisciplinary UT research institutes: Mesa+ Institute, TechMed Centre and Digital Society Institute.

Job details

Title

PhD position on hermetic packaging of microfluidic sensor chips without glue or elastomers for ventilators and multi-infusion systems

Looking for a job that matters? Join the university of technology that puts people first – and shape new opportunities both for yourself and for ou...