Process Integration Principal Engineer

OSRAM Opto Semiconductors (Malaysia) Sdn Bhd

Kulim

Presencial

MYR 73 000 - 100 000

Tempo integral

Há 2 dias
Torna-te num dos primeiros candidatos

Uma candidatura completa num minuto

Currículo e carta de apresentação personalizados, prontos a enviar.

Ultrapassa os filtros ATS

Resumo da oferta

OSRAM OS Penang is seeking an experienced Process Integration representative for frontend LED manufacturing. You will define functional blocks, bridge unit process development with chip development and drive robust, high-yield production.

Candidates should have a Master’s or PhD in Physics, Chemistry or Materials Sciences with 5–8 years in semiconductor/LED fabrication, and strong problem-solving skills (Six Sigma, DOE, FMEA). Experience with Minitab is beneficial.

Qualificações

  • Master's degree or PhD in Physics, Chemistry or Materials Sciences.
  • Minimum 5-8 years of experience in semiconductor or LED fabrication processes.
  • Project management skills are beneficial.
  • Advanced problem solving skills (Six Sigma, DOE, FMEA, 8D, SPC, FDC) and familiarity with statistical software are advantageous.
  • Experience with statistical software such as Minitab is beneficial.

Responsabilidades

  • Process Integration representative for frontend LED manufacturing processes: defining and owning functional blocks of overall process, understand interactions, process windows/requirements and ensure that all unit process steps combined deliver a robust and high yielding product.
  • Introduction of new technologies/platforms/products into production, act as bridge between unit process development, chip development and the factory´s process engineering, owner of control plan
  • Ensure robust process development, design for manufacturability, fit to factory capabilities / platforms, bring mass production experience into the development process, Early involvement from R&D start to define development needs/do&don't for manufacturing
  • Clearly understand tool capabilities and influence tool roadmap as required for future technologies, achieve desired capex utilization and specified target cost goals. Make sure to identify and monitor critical parameters (special characteristics), ensure smooth ramp-up; update control plans
  • Technical Ownership for site to site technology / product transfers, ensure site synchronization including proper change management. Supervise and monitor manufacturing of the process technology in close teamwork with process engineering and quality assurance
  • Excursion management, root cause finding, process problems solving in close teamwork with different departments (e.g. manufacturing, process development, QA, FA, product engineering, chip RnD, Test).
  • Take process ownership at customer audits and for control plan related reporting to key customers
  • Own and maintain process deliverables (FMEA, Control Plan) from process freeze onwards , lead cross-functional technical teams and discussions

Conhecimentos

Project management
Advanced problem solving
Six Sigma
Statistical analysis

Formação académica

Master's or PhD in Physics, Chemistry or Materials Sciences

Ferramentas

Minitab
DOE software

Descrição da oferta de emprego


The ams OSRAM Group is a global leader in innovative light and sensor solutions. As a specialist in Digital Photonics, we combine technological excellence with state-of-the-art global manufacturing capabilities to offer our customers the broadest portfolio of digital emitter and sensor technologies.
Globally, our teams develop groundbreaking solutions aligned with societal megatrends like intelligent mobility, artificial intelligence, augmented reality, smart health, and robotics.
At ams OSRAM, employees are part of a highly innovative, international technology environment. Diverse teams, a high degree of ownership, and exciting challenges provide the opportunity to grow, develop, and make a real difference. Because behind our innovations are people who carry something special inside and who bring their unique strengths to work every day.

Show the world what you are made of.

Your new responsibilities
  • Process Integration representative for frontend LED manufacturing processes: defining and owning functional blocks of overall process, understand interactions, process windows/requirements and ensure that all unit process steps combined deliver a robust and high yielding product.
    Introduction of new technologies/platforms/products into production, act as bridge between unit process development, chip development and the factory´s process engineering, owner of control plan
  • Ensure robust process development, design for manufacturability, fit to factory capabilities / platforms, bring mass production experience into the development process, Early involvement from R&D start to define development needs/do&don’t for manufacturing
    Clearly understand tool capabilities and influence tool roadmap as required for future technologies, achieve desired capex utilization and specified target cost goals. Make sure to identify and monitor critical parameters (special characteristics), ensure smooth ramp-up; update control plans
  • Technical Ownership for site to site technology / product transfers, ensure site synchronization including proper change management. Supervise and monitor manufacturing of the process technology in close teamwork with process engineering and quality assurance
    Improve yields, cost (e.g simplify process), process robustness based on inputs / requirements from yield enhancement / product owners / manufacturing / QA
  • Excursion management, root cause finding, process problems solving in close teamwork with different departments (e.g. manufacturing, process development, QA, FA, product engineering, chip RnD, Test).
  • Take process ownership at customer audits and for control plan related reporting to key customers
    Own and maintain process deliverables (FMEA, Control Plan) from process freeze onwards , lead cross-functional technical teams and discussions


What we look for

  • Master degree or PhD in Physics, Chemistry or Material Sciences
  • Min 5-8 years experience in semiconductor or LED fabrication processes
  • Project management skills are beneficial
  • Advanced problem solving skills (e.g. Six Sigma), Design of Experiments, FMEA, 8D methodology, SPC, FDC, automotive experience are beneficial
  • Experience with statistical software beneficial (e.g. Minitab, DOE software)

ams OSRAM is an Equal Employment Opportunity Employer. Diversity, equity and inclusion is strongly established in our corporate culture and we firmly believe it makes us more successful as a company. All qualified applications will receive consideration for employment regardless of ethnic, national or social origin, gender, gender identity, sexual orientation, color, religion, age, physical and mental abilities.

Information at a Glance Job ID: 24719 Posting Start Date: 11/6/26 Job Family: Operations & Manufacturing Career Level: Experienced Professional (>8 years) Company: OSRAM OS Penang Schedules: Full Time Work Model: On-Site Job Shift: Flex time Regular/Temporary: Regular Department: OS Process Integration Integrated Flows

Application deadline: As long as the job is listed on our career page, we are looking for suitable candidates. We look forward to receiving your application.

Obtém a tua avaliação gratuita e confidencial do currículo.

ou arrasta e larga o ficheiro aqui.

Similar jobs

Ofertas semelhantes que vale a pena comparar

Process Integration Senior Staff Engineer
Process Integration Senior Staff Engineer

OSRAM Opto Semiconductors (Malaysia) Sdn. Bhd., Penang • Kulim

Presencial
MYR 120 000 - 180 000
Process Development Senior Staff Engineer (Wet Chemistry)
Process Development Senior Staff Engineer (Wet Chemistry)

ams-OSRAM AG • Kulim

Presencial
MYR 120 000 - 180 000
Process Integration Principal Engineer
Process Integration Principal Engineer

ams-OSRAM AG • Kulim

Presencial
MYR 150 000 - 230 000
Frontend Testing Senior Staff Engineer
Frontend Testing Senior Staff Engineer

OSRAM Opto Semiconductors (Malaysia) Sdn Bhd • Kulim

Presencial
MYR 120 000 - 180 000
Health insurance
Training & career development
Senior Product Engineer (NPI LED)
Senior Product Engineer (NPI LED)

OSRAM Opto Semiconductors (Malaysia) Sdn Bhd • Bayan Lepas

Presencial
MYR 78 000 - 123 000
Senior Staff Process Engineer, Metallization
Senior Staff Process Engineer, Metallization

OSRAM Opto Semiconductors (Malaysia) Sdn Bhd • Kedah

Presencial
MYR 150 000 - 260 000
Process Development Senior Staff Engineer (Plasma/PECVD/Etch/Deposition)
Process Development Senior Staff Engineer (Plasma/PECVD/Etch/Deposition)

OSRAM Opto Semiconductors (Malaysia) Sdn Bhd • Bayan Lepas

Híbrido
MYR 180 000 - 300 000
Process Development Senior Staff Engineer (Casting/Molding/Encapsulation)
Process Development Senior Staff Engineer (Casting/Molding/Encapsulation)

OSRAM Opto Semiconductors (Malaysia) Sdn Bhd • Bayan Lepas

Presencial
MYR 120 000 - 200 000
Process Engineering (Assembly/NPI) Staff Engineer
Process Engineering (Assembly/NPI) Staff Engineer

Osram (Malaysia) Sdn Bhd • Kedah

Presencial
MYR 120 000 - 180 000
Engineer (Industrial Engineering)
Engineer (Industrial Engineering)

ams-OSRAM AG • Kulim

Presencial
MYR 55 000 - 90 000
Principais localizações