Mechanical Engineer (Rotating & Static Equipment)

Pengerang Terminals Sdn Bhd

Pengerang

On-site

MYR 120,000 - 180,000

Full time

8 days ago

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Pengerang Terminals Sdn Bhd in Malaysia is seeking a Mechanical Engineer (Rotating & Static Equipment) to support safe operation and compliance with PED, ATEX, SIL, and SHEQ requirements. You will guide and implement safe work practices, participate in risk assessments, and travel for vendor meetings and periodic site inspections.

You will lead troubleshooting and performance optimization for tanks, pressure vessels, piping systems, valves, pumps and gearboxes, monitoring MTBF/MTTR, reviewing

Qualifications

  • Bachelor's Degree in Mechanical Engineering.
  • 6–8 years of relevant experience.
  • Experience in failure investigations, RCA, FMEA, RBI and related methods.

Responsibilities

  • Provide technical support for rotating and static equipment to maintain uptime.
  • Lead troubleshooting and root-cause investigations using RCA, FMEA, and related methods.
  • Review PM/CM/WOOI data and optimize maintenance strategies and spare parts management.
  • Prepare mechanical scopes, specs, drawings, procedures, and cost estimates.
  • Collaborate with Operations, Maintenance, SHE, Procurement and vendors; supervise contractors during outages.

Skills

Troubleshooting
Maintenance planning
RCA
FMEA
RBI

Education

Bachelor's Degree in Mechanical Engineering

Job description

Mechanical Engineer (Rotating & Static Equipment)

Comply with PTSB’s values, principles, and safety policies on SHE related matters.

Guide, support, and implement safe work practices in line with PTSB's Safety, Security, Health, Environment and Quality Management System requirements, and in compliance with relevant legal requirements.

Ensure full compliance with statutory licenses to operate, process safety requirements, and equipment compliance standards including Pressure Equipment Directive (PED), Atmospheres Explosible (ATEX), and Safety Integrity Level (SIL).

Asset Reliability & Troubleshooting:

Provide technical support and lead troubleshooting for all static equipment (storage tanks, pressure vessels, piping systems, valves) and rotating equipment (pumps, compressors, gearboxes, mechanical seals) to maintain operational readiness.

Monitor and optimize equipment performance through Mean Time Between Failures (MTBF), Mean Time to Repair (MTTR), equipment availability, and downtime analysis.

Maintenance & Backlog Management:

Analyze Maintenance Execution 2 (ME2) maintenance logs—including Preventive Maintenance (PM), Corrective Maintenance (CM), and Work Out of Inspection (WOOI) data to eliminate work backlogs and optimize plant performance.

Develop, review, and improve maintenance strategies, effective Preventive Maintenance (PM) schedules and routes, spare parts management, work instructions, and checklists.

Condition Monitoring & Inspection:

Manage condition-monitoring regimes (vibration analysis, lube oil sampling, thermography, Non-Destructive Testing (NDT), and corrosion monitoring).

Review inspection reports to detect and mitigate early asset deterioration and prevent early failures.

Lead and conduct failure investigations using structured methodologies Root Cause Analysis (RCA), Failure Mode and Effects Analysis (FMEA), Failure Mode, Effects, and Criticality Analysis (FMECA), and Tripod Beta to eliminate recurring breakdowns.

Identify equipment improvement opportunities and recommend equipment repairs, replacements, or technical upgrades.

Engineering Reviews, Projects & Budgeting:

Prepare and review mechanical scopes of work, technical specifications, engineering drawings, repair procedures, and cost estimates.

Support CAPEX, 3-Year Maintenance Plan (3YMP), and sustaining modification projects by evaluating vendors, supervising contractors, and monitoring installation, testing, and commissioning activities.

Prepare and manage the maintenance OPEX budget.

Cross-Functional Collaboration & Decision-Making:

Determine troubleshooting methods and prioritize daily maintenance tasks based on asset criticality, safety, and operational needs.

Identify equipment integrity risks, elevate urgent safety concerns, and implement risk management tools including hazard identification, Risk Assessment (RA), Hazard and Operability Study (HAZOP), Job Safety Analysis (JSA), Quantitative Risk Assessment (QRA), and Safety Critical Elements (SCE) interlocks

Work closely with Operations, Maintenance, SHE and Procurement teams, as well as external equipment suppliers and OEMs, maintenance contractors, engineering consultants, regulatory authorities, inspection bodies and Vopak.

Support equipment breakdowns, emergencies and major maintenance activities outside regular working hours when operational demands require.

Requirements:
Education & Experience:

Bachelor's Degree in Mechanical Engineering, or other engineering disciplines with relevant mechanical maintenance experience may also be considered.

Minimum 6-8 years of relevant experience (particularly for a mid-level/senior engineering position).

Middle level with experience in conducting failure investigations, Reliability-Centered Maintenance (RCM), Failure Mode and Effects Analysis (FMEA), Root Cause Analysis (RCA), or similar approaches.

Strong understanding of terminal infrastructure and utilities: tanks, lines, pumps, E&I interfaces, jetties, racks, energy management, and vapor control.

Understanding of Risk Based Maintenance principles, including Risk-Based Inspection (RBI), Reliability-Centered Maintenance (RCM), and Failure Mode, Effects, and Criticality Analysis (FMECA).

Knowledge of Lean methodology continuous improvement, debottlenecking, waste reduction, Key Performance Indicator (KPI) management and basic project management.

Languages:

Required minimum proficiency in writing and communication in English and Bahasa Malaysia.

Personal Characteristics & Working Conditions:

Analytical, data-driven, meticulous, detail-oriented, energetic and focused on continuous improvement.

Demonstrates a thoughtful and approachable personality with genuine interpersonal and collaborative skills.

Ability to work across various oil and gas terminal facilities, including tank farms, pump areas, pipelines and jetties, with responsibilities involving regular site inspections and contractor supervision.

Flexibility to travel occasionally for vendor meetings, training sessions and project-related activities.

Pengerang Terminals Sdn Bhd is a joint-venture company between Dialog Group Berhad and Royal Vopak. Dialog Group is a Malaysian-listed integrated specialist technical services provider in the oil, gas and petrochemical industry, while Royal Vopak is the world’s largest independent tank storage provider for bulk liquids headquartered in the Netherlands. The terminal provides storage, blending and distribution services for crude and clean petroleum products with storage capacity of approximately 1.7 million cubic meters (cbm) . The terminal has six berths and is able to accommodate Very Large Crude Carriers (VLCCs).

Pengerang Terminals Sdn Bhd is a joint-venture company between Dialog Group Berhad and Royal Vopak. Dialog Group is a Malaysian-listed integrated specialist technical services provider in the oil, gas and petrochemical industry, while Royal Vopak is the world’s largest independent tank storage provider for bulk liquids headquartered in the Netherlands. The terminal provides storage, blending and distribution services for crude and clean petroleum products with storage capacity of approximately 1.7 million cubic meters (cbm) . The terminal has six berths and is able to accommodate Very Large Crude Carriers (VLCCs).

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Lead Mechanical Engineer - Oil Terminal
Lead Mechanical Engineer - Oil Terminal

Confidentiel • Kuala Lumpur

On-site
MYR 180,000 - 300,000
MANAGER
MANAGER

SPT SERVICES SDN BHD • Pengerang

On-site
MYR 180,000 - 340,000
Maintenance Technician (LPG)
Maintenance Technician (LPG)

Petron Malaysia • Port Dickson

On-site
MYR 42,000 - 66,000
Maintenance Technician (LPG)
Maintenance Technician (LPG)

Petron Malaysia Refining & Marketing Bhd • Port Dickson

On-site
MYR 36,000 - 60,000
Senior Mechanical Engineer: Asset Reliability & RCA
Senior Mechanical Engineer: Asset Reliability & RCA

Pengerang Terminals Sdn Bhd • Pengerang

On-site
MYR 120,000 - 180,000
Project Manager - Oil Terminal
Project Manager - Oil Terminal

Confidentiel • Kuala Lumpur

On-site
MYR 180,000 - 300,000
Electrical Engineer
Electrical Engineer

HENGYUAN REFINING COMPANY BERHAD • Port Dickson

On-site
MYR 180,000 - 300,000
Project Manager – Equipment
Project Manager – Equipment

Pelabuhan Tanjung Pelepas Sdn Bhd (PTP) • Gelang Patah

On-site
MYR 200,000 - 320,000
MOBILE EQUIPMENT (ME) TECHNICIAN
MOBILE EQUIPMENT (ME) TECHNICIAN

Pelabuhan Tanjung Pelepas Sdn Bhd (PTP) • Gelang Patah

On-site
MYR 36,000 - 72,000
Instrument System Engineer
Instrument System Engineer

HENGYUAN REFINING COMPANY BERHAD • Port Dickson

On-site
MYR 120,000 - 180,000