Electronics Engineer

Pingspace

Penang

On-site

MYR 72,000 - 96,000

Full time

4 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Pingspace in Penang seeks an Electronics Engineer to lead the hardware development lifecycle for warehouse robotic systems. You will work on power and control circuits, perform circuit design, simulation, PCB layouts, and prototype validation to enable production releases.

The role requires strong knowledge of analogue/digital electronics, circuit theory, and hands-on hardware experience with Altium, MATLAB, and STM32/Python. You will collaborate across software, mechanical, and production teams.

Qualifications

  • Bachelor’s or higher in Electrical/ Electronics/ Mechatronics/Instrumentation/Telecommunication/Control System Engineering with 3–4 years in R&D for electrical & electronics/mechatronics
  • Master's or PhD with 1–3 years of relevant R&D experience in electronics or mechatronics design
  • Fresh graduates with technically intensive final-year projects and strong electronics theory understanding

Responsibilities

  • Own electronics hardware development lifecycle from concept to final product release
  • Design and develop power, control, and related circuitry for warehouse robotic systems
  • Apply analogue, digital, mixed-signal and power electronics knowledge to solve design challenges
  • Create schematics and PCB layouts (Altium) adhering to IPC/DFM requirements
  • Prepare fabrication/assembly documentation and support prototype bring-up and testing
  • Collaborate with software, mechanical, and production teams to integrate hardware into robotic systems
  • Perform hardware debugging, root-cause analysis and design refinements based on VER/FVT results
  • Plan and support Design Verification Testing (DVT) and product development activities

Skills

C/C++/Python
Hardware debugging
Schematic development
PCB design

Education

Bachelor of Engineering (Hons) in Electrical/Electronics/Mechatronics/Instrumentation/Telecommunication/Control System Engineering
Master's or PhD in Electrical/Electronics/Mechatronics/Instrumentation/Telecommunication/Control System Engineering
Fresh graduate with strong electronics theory & hands-on projects

Tools

Altium Designer
MATLAB
Arduino
STM32
Python

Job description

Pingspace specializes in building the Matrix Robotics Storage System, a Cubic Automated Storage System designed to revolutionize warehouse automation and logistics solutions. Our mission is to revolutionize the way goods are moved within warehouses and distribution centers, leveraging cutting-edge technology and innovative engineering solutions. As pioneers in the field of robotics, we are committed to pushing the boundaries of innovation and delivering world-class solutions to our clients.

Job Desription:

We are looking for a passionate and technically strong Electronics Engineer to join our R&D Electronics Engineering team. The successful candidate will be directly involved in the research, architecture, circuit design, development, prototyping, testing, validation, debugging, qualification, and production release of electronics hardware for warehouse robotic systems including power systems, control systems, and related products.

This role is intended for an engineer with a strong interest, knowledge, and practical experience in electronics circuit theory, circuit design, and hands-on hardware development. The engineer will be expected to take technical ownership of the complete electronics hardware development lifecycle, from initial circuit design concepts and circuit theory through simulation, schematic design, PCB implementation, electronic hardware development, laboratory validation, design qualification, and final product release.

Key responsibilities:

Design, analyse, and develop innovative electrical and electronic circuit solutions for warehouse robotic systems, including power systems, control systems, and related electronic products.

Develop electronics solutions from initial engineering requirements and circuit theory, including defining the circuit architecture, selecting suitable circuit topologies, performing circuit calculations, and developing practical hardware solutions.

Apply strong knowledge of analogue, digital, mixed-signal, power electronics, and control circuit theory to solve real engineering and product development challenges.

Develop power and control system circuit designs, including power distribution, power conversion, sensing, protection, monitoring, and control circuits.

Develop isolated and non-isolated power systems, including isolated power supplies, control signal isolation, industrial interfaces, and protection circuits.

Use circuit simulation and engineering analysis tools to design, evaluate, and validate conceptual circuit solutions before physical hardware implementation.

Perform circuit analysis and calculations to verify component operating conditions, voltage and current ratings, power dissipation, tolerances, operating margins, and expected circuit behaviour.

Select suitable electronic components and circuit topologies based on electrical performance, reliability, availability, lifecycle, manufacturability, and product requirements.

Develop complete electronics hardware designs from circuit concept and architecture through schematic design and PCB implementation.

Develop professional schematics with a strong understanding of the electrical function, operation, and interaction of every major circuit block and component within the design.

Use (preferably) Altium Designer to design and review schematics and multi-layer PCB layouts in accordance with IPC standards, electrical design requirements, and Design for Manufacturability (DFM) principles.

Design and review PCB implementation with consideration for component placement, grounding, power distribution, current paths, noise, isolation, thermal performance, signal integrity, manufacturability, and practical product requirements.

Generate and release complete PCB fabrication and PCBA production documentation, including fabrication files, assembly files, BOMs, and relevant engineering documentation.

Build, assemble, and bring up newly developed hardware prototypes, taking technical ownership of the initial hardware power-up and circuit commissioning through design verification, design refinement, and the complete hardware production release cycle.

Perform hands‑on circuit debugging and engineering root‑cause analysis when designed electronics hardware or prototypes do not perform as expected, and implement technically justified circuit or hardware design improvements to resolve identified issues.

Develop and execute engineering verification methods to confirm that the designed circuit performs according to the original design requirements, calculations, and simulation results.

Plan and support Design Verification Testing (DVT) and product development activities to verify circuit functionality, electrical performance, operating margins, reliability, and robustness.

Participate in engineering design reviews and continuously improve circuit and hardware designs throughout the prototype‑to‑final‑product development cycle, incorporating hardware design iterations, engineering evaluations, and Design Verification Testing (DVT) findings.

Develop electronic hardware test methods and embedded hardware test sequences using platforms such as MATLAB, Arduino, STM32, Python, or equivalent tools to support circuit development and capture engineering data for evaluating circuit performance, functionality, and reliability.

Analyse designed hardware, prototype, and DVT results to correlate actual hardware performance with circuit theory, design calculations, simulation results, and product requirements.

Drive assigned electronics designs through the complete electronics hardware development lifecycle, including concept development, circuit architecture, circuit design, simulation, component selection, schematic development, PCB design, prototype bring‑up, debugging, design verification, design refinement, and final product release.

Work closely with Software Engineers, Embedded System Engineers, Mechanical Engineers, Technicians or Field Application Engineers and Production teams to integrate your designed electronics hardware into complete robotic systems.

Liaise with sourcing teams, component manufacturers, suppliers, PCB fabrication and PCB assembly vendors to support component selection, prototype development, manufacturability, production readiness, and hardware issue resolution.

Take technical ownership of assigned electronics hardware designs from initial engineering concept through to a validated, manufacturable, and production‑ready final product.

Requirements:

Bachelor of Engineering (Hons) Degree in Electrical/ Electronics/ Mechatronics /Instrumentation / Telecommunication / Control System Engineering (accredited under the Washington Accord), with 3–4 years of relevant R&D experience in electrical & electronics / mechatronics system design engineering,

OR

Master's Degree or Ph.D. in Electrical/ Electronics/ Mechatronics /Instrumentation / Telecommunication / Control System Engineering, with 1–3 years of relevant R&D experience in electrical & electronics / mechatronics system design engineering,

OR

Fresh Graduate with at least Second Upper-Class Honours and a technically intensive final‑year project, with a strong interest and solid knowledge of fundamental electronics theory, circuit analysis, and practical electronics development.

Registered Graduate Engineer with BEM/IEM or equivalent professional engineering body, where applicable.

Strong knowledge and understanding of analogue electronics, digital electronics, circuit theory, and practical electronic circuit design is required.

Strong knowledge and practical experience in analogue electronics, digital electronics, and microprocessor / microcontroller‑based system design is required.

Strong knowledge and practical experience in electronics circuit design, power electronics design and schematic development is required.

Knowledge and understanding of DC/DC, DC/AC, AC/DC circuit theory and practical system design is required.

Knowledge and experience in analysing datasheets, component specifications, application circuits, and electrical operating limitations is required.

Knowledge and experience with stepper motors, DC motors, servo motors, encoders, and relevant motor‑driver or control topologies will be an advantage.

Knowledge and experience with embedded and industrial communication interfaces such as CAN, UART, RS‑232, RS‑485, I2C, SPI, or similar interfaces will be an advantage.

Knowledge and experience with advanced or high‑speed digital electronics involving RAM, microprocessors, USB, HDMI, Ethernet, or similar high‑speed digital interfaces will be an advantage.

Understanding and practical application of multi‑layer PCB design, PCB layer stack‑ups, grounding, power distribution, routing topology, and PCB design constraints is required.

Experience in high‑current or high‑power PCB design, including approximately 1.5–5 kW power transfer applications or higher will be an advantage.

Knowledge and practical experience using electrical & electronics design and development tools such as Proteus, Multisim, MATLAB/Simulink, LTspice/PSpice, Altium Designer, Arduino, STM32/Nucleo or equivalent tools is required.

Practical laboratory skills, including prototyping, soldering, rework, circuit bring‑up, debugging, and the use of oscilloscopes, multimeters, power supplies & loads, logic analysers, and other laboratory equipment will be an advantage.

Practical experience in schematic and PCB design using Altium Designer or similar professional PCB design tools is required; experience with Altium Designer is preferred.

Understanding and practical use of PCB Design Rules, manufacturing constraints, and design‑for‑manufacturability principles.

Able to work both independently and as part of a multidisciplinary engineering team.

Open and willing to learn new design methods, circuit topologies, engineering tools, and prototyping techniques.

Able to work in a laboratory‑based office environment involving hands‑on circuit development, prototype testing, and hardware debugging.

Skills:

C/ C++ / Python

Circuit Design, Simulation, Analysis and Schematic Development

Hardware Debugging and Root‑Cause Analysis

PCB Design and Manufacturing Documentation

Personal Attributes / Characteristics:

Quick learner

Flair for lateral thinking

Critical & Analytical Thinker

Strong problem‑solving and troubleshooting skills

Self‑motivating

Passionate and Proactive

Strong interest in electronics circuit theory and practical hardware development

Willing to investigate and solve complex technical problems

Confident working with electrical and electronic systems

Willing to take ownership of the complete electronics hardware development product lifecycle

Pingspace,warehouse robotics startup, is on a mission to simplify, digitise and automate warehouse industry. We have a team of passionate people who are brave and bold to challenge the status quo and change how an industry works.

Pingspace,warehouse robotics startup, is on a mission to simplify, digitise and automate warehouse industry. We have a team of passionate people who are brave and bold to challenge the status quo and change how an industry works.

What can I earn as an Electronics Engineer

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Electronic Engineer
Electronic Engineer

TECAN CDMO SOLUTIONS PN SDN. BHD • Simpang Ampat

On-site
MYR 70,000 - 110,000
Robotics Electronics Engineer - Power & Control Systems
Robotics Electronics Engineer - Power & Control Systems

Pingspace • Penang

On-site
MYR 72,000 - 96,000
Mechatronic Engineer
Mechatronic Engineer

ALKHALIQ GLOBAL SDN. BHD, • Dengkil

On-site
MYR 40,000 - 66,000
R&D Engineer (Electronics)
R&D Engineer (Electronics)

IRCare Sdn Bhd • Seberang Perai

On-site
MYR 33,000 - 56,000
Hands-on R&D Experience
Learning & Mentorship
Career Development
+1
Electronics Engineer
Electronics Engineer

Dyson Inc. • Johor Bahru

On-site
MYR 60,000 - 90,000
Electronic Design Engineer (m/f/d)
Electronic Design Engineer (m/f/d)

Mühlbauer Group • Malacca City

On-site
MYR 100,000 - 167,000
Hardware Design Engineer
Hardware Design Engineer

Celestica • Bayan Lepas

On-site
MYR 60,000 - 100,000
Project Sales Engineer
Project Sales Engineer

EA MAX SOLUTIONS SDN. BHD. • Puchong

On-site
MYR 60,000 - 120,000
Car allowance
Fuel allowance
Parking
+3
PCB Rework/Electrical Technician (Urgent Hiring)
PCB Rework/Electrical Technician (Urgent Hiring)

NCS Global Technology Sdn. Bhd. • Bayan Lepas

On-site
MYR 22,000 - 33,000
Design Engineer - Electrical Hardware
Design Engineer - Electrical Hardware

Körber • Shah Alam

On-site
MYR 60,000 - 80,000