Army Aviation Non-Destructive Inspector 2

Advanced Search Group; Kuwait City; Presencial; KWD 22.000 - 34.000; Jornada completa

Descripción de la vacante

Army Aviation is seeking an experienced Non-Destructive Inspector II to inspect aerospace components using NDI methods and fluid analysis. You will determine test methods, prepare fluids, interpret results, and report defects for repair.

Responsibilities include monitoring radiography areas, analyzing oil wear metals, and maintaining NDI equipment. Must have Level II NDI training, NAS 410/ASNT-CP-189, and the ability to travel internationally.

Formación

• Three or more years as an aviation inspector.
• Completion of a Level II NDI training course and current basic qualification.
• Shall be trained per NAS 410 or ASNT-CP-189 to the assigned level.
• Ability to work internationally and obtain US government security clearance.

Responsabilidades

• Inspect aerospace weapon systems components for structural integrity using nondestructive methods.
• Determine test methods, prepare fluids and parts for nondestructive inspection.
• Interpret NDI results and report defects to repair centers.
• Analyze wear metal content and recommend corrective actions.
• Operate and maintain nondestructive inspection equipment.
• Ensure PPE use and lockout/tagout procedures are followed.
• Provide technical support and guidance to engineers and technicians.

Conocimientos

Aviation inspection

Non-destructive testing

Read and interpret test results

Educación

Non Destructive Inspection Level II training

NAS 410 or ASNT-CP-189 qualification

Herramientas

ULLS-AE

Torque wrenches

Dial indicators

Micrometers

Cable tensiometers

Sheet metal tools

Descripción del empleo

Army Aviation Non-Destructive Inspector 2

The Non-Destruction Inspection Technician (NDI) II inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.

Determine test method and prepare fluids and parts for nondestructive inspection.

Interpret nondestructive inspection test results and provide information about defects to repair center.

Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.

Establish radiation areas for radiographic operations.

Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.

Perform nondestructive inspection on structures, components, and systems.

Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrate testing, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.

Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.

Operate, maintain, and inspect nondestructive equipment.

Perform operator maintenance and service inspections on shop equipment and tools.

Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.

Perform silver recovery functions.

Handle and dispose of hazardous waste and materials.

Perform other qualified duties as assigned.

Desired Candidate Profile

• High school diploma or equivalent required.
• U.S. military technical school or specialized training course is desired, certification of education level is required.
• Completion of a initial Non Destructive Inspection Level II training Course and current basic qualification.
• Three (3) or more years experience as an aviation inspector and a minimum of one year experience on the assigned(MDS) airframe . (UH60, AH64, CH47 )
• Shall be trained and qualified per NAS 410 or ASNT-CP-189 to the level assigned.
• Must be in possession of a U.S. Passport with 3 years of validity remaining at the time of hire and be able to travel internationally.
• Must be a US Citizen.
• Ability to obtain and maintain a US Government Security Clearance, NAC-I T1 Public Trust. ** US Citizenship is required to obtain a T1/CAC NACI Clearance.
• Able to clear CENTCOM Medical requirements for deployment.
• Ability to obtain and maintain Kuwait Visa
• Previous experience in the maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components (UH60, AH64, CH47).
• Have the skills and knowledge to set up and standardize equipment, conduct tests, interpret and evaluate for acceptance or rejection, and document.
• Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.
• Capable of providing the necessary guidance and supervision to trainers and Level I personnel in the technique/method in which they are certified.
• Familiar with the codes, standards, and other contractual documents that control the method as utilized by the employer.
• Capable of developing written instructions from approved general procedures. Such instructions shall require final approval by a Level III.
• Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.
• Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.
• Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.
• Comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.
• Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.
• Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.
• Ability to provide technical support to structural/mechanical engineers and customers.
• Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.
• Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day
• Must be able to climb stairs, ramps, ladders, and work stands
• Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders
• May be required to lift heavy objects whose weight may exceed 50 pounds
• Must be able to type using a standard keyboard to communicate through e-mail and various software applications
• Will handle dirty parts and lubricants
• Will be required to wear proper Personal Protective Equipment (PPE)
• Must be able to pass a Respirator Physical and Fit Test qualification
• May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.
• Must be able to lift/push/pull minimum of 50 pounds
• May work in maintenance shop or outside
• Must be able to work in a shop where the environment is drafty, noisy, and dirty
• May be exposed to extreme noise from operating equipment
• May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.