Plc And Control Engineer

Ingersoll Rand Inc.

Pune District, Bengaluru

On-site

INR 1,200,000 - 1,800,000

Full time

3 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Stock options
Yearly performance-based bonus
Leave encashments
Maternity/Paternity leaves
Health insurance
Employee Assistance Program
LinkedIn Learning
Awardco
Collaborative, multicultural work env

Job summary

Ingersoll Rand Inc. in Pune/Bangalore/Sahibabad seeks an experienced Networks, Controls & Automation Engineer to design, program, and commission PLC-based automation systems for power tools and industrial equipment.

You will configure PLCs from Siemens, Mitsubishi, Allen-Bradley, and Schneider Electric, integrate with SCADA/DCS, and support on-site commissioning and validation. The role requires hands-on automation expertise, strong troubleshooting, and travel 70–80% to customer sites and

Qualifications

  • Bachelor's in Mechatronics/Electrical or Electronics & Communications.
  • 4–6 years relevant experience in Industrial Automation.
  • Good level of English, spoken and written.
  • Hands-on experience in commissioning and maintenance of automated equipment or manufacturing machinery.
  • Strong troubleshooting skills in control systems and industrial networks.
  • Willingness to travel for installation, commissioning and support activities.

Responsibilities

  • Design, develop, program, and commission PLC-based automation systems for power tools, lifting equipment, and industrial manufacturing.
  • Configure, troubleshoot, and optimize PLC platforms including Siemens, Mitsubishi, Allen-Bradley, and Schneider Electric controllers.
  • Integrate PLC systems with SCADA/HMI/DCS and Industrial IoT for real-time monitoring and control.
  • Configure and maintain industrial Ethernet networks, switches, wireless systems, and remote connectivity.
  • Support installation, commissioning, startup, and validation at customer sites and facilities.
  • Perform fault diagnosis and root cause analysis on PLCs, panels, devices, and networks.
  • Ensure reliable communication between PLCs, VFDs, sensors, actuators, and lifting equipment controllers.
  • Contribute to automation standards, control philosophies, and network architecture guidelines.
  • Conduct preventive maintenance and health checks on automation hardware and instrumentation.
  • Participate in FAT/SAT and customer demonstrations for automation solutions.
  • Provide technical support and training to customers and service engineers.

Skills

PLC programming
Commissioning
Troubleshooting
Industrial automation
SCADA integration
Field networks

Education

Bachelors in Mechatronics/Electrical or Electronics & Communications

Tools

Siemens
Mitsubishi
Allen-Bradley
Schneider Electric

Job description

Job Title: Networks, Controls & Automation Engineer
Location: Pune/Bangalore/Sahibabad
Headcounts: 2

About Us

Ingersoll Rand is a Fortune 500 company with a passion for making lives better. We do this by living our values, and through a relentless focus on the success of our customers and partnering with our employees to think and act like owners. We believe in sustainability through the development and distribution of a broad range of global brands designed to meet the needs of our customers in both efficient and responsible ways. Ingersoll Rand is a diverse and inclusive environment. For more information visit: www.irco.com.


Job Overview:

Experienced PLC and Field Communication Engineer with expertise in industrial automation, control systems, and communication networks. Skilled in PLC programming, commissioning, troubleshooting, and integrating field devices with SCADA/DCS systems.


Responsibilities:
  • Design, develop, program, and commission PLC-based automation systems for power tools, lifting equipment, and industrial manufacturing applications.
  • Configure, troubleshoot, and optimize PLC platforms including Siemens, Mitsubishi, Allen-Bradley, and Schneider Electric controllers.
  • Integrate PLC systems with SCADA, HMI, DCS, and Industrial IoT platforms to enable real-time monitoring, diagnostics, and control.
  • Configure and maintain industrial communication networks utilizing protocols such as Modbus RTU/TCP, Profibus, Profinet, Ethernet/IP, and OPC.
  • Support installation, commissioning, startup, and validation activities for automation and control systems at customer sites and manufacturing facilities.
  • Perform fault diagnosis, root cause analysis, and corrective actions related to PLC programs, control panels, field devices, and communication networks.
  • Ensure reliable communication between PLCs, VFDs, sensors, actuators, lifting equipment controllers, and other field devices.
  • Configure and troubleshoot industrial Ethernet infrastructure, managed switches, wireless communication systems, and remote connectivity solutions.
  • Assist in the development and implementation of automation standards, control philosophies, and network architecture guidelines.
  • Conduct preventive maintenance and health checks of automation hardware, communication networks, and field instrumentation.
  • Calibrate, test, and validate field instruments, sensors, encoders, load cells, limit switches, and safety devices used in lifting and material handling systems.
  • Support continuous improvement initiatives by identifying opportunities to enhance equipment uptime, productivity, safety, and process efficiency.
  • Participate in FAT (Factory Acceptance Testing), SAT (Site Acceptance Testing), and customer demonstrations for automation solutions.
  • Ensure compliance with industrial safety standards, electrical regulations, and Ingersoll Rand quality requirements during project execution and service activities.
  • Provide technical support and training to customers, service engineers, and internal stakeholders on automation systems and communication networks.

Qualifications:
  • Bachelors in Mechatronics/Electrical or Electronics & Communications.
  • 4-6 years relevant experience in Industrial Automation domain.
  • Good level of English, spoken and written
  • Hands-on experience in commissioning and maintenance of automated equipment, lifting systems, material handling equipment, or manufacturing machinery.
  • Strong troubleshooting skills in both control systems and industrial communication networks.
  • Willingness to travel for installation, commissioning, and customer support activities.

Core Competencies:
  • Self-motivator and Self Starter
  • Customer oriented
  • Problem Solving skills
  • Capability to understand and synthesize of customer issues
  • Communication skills
  • Good team player

Travel & Work Arrangements/Requirements
  • 70-80% Travel required.

What we Offer
  • We are all owners of the company! Stock options (Employee Ownership Program) that align your interests with the company's success.
  • Yearly performance-based bonus, rewarding your hard work and dedication.
  • Leave Encashments
  • Maternity/Paternity Leaves
  • Employee Health covered under Medical, Group Term Life & Accident Insurance
  • Employee Assistance Program
  • Employee development with LinkedIn Learning
  • Employee recognition via Awardco
  • Collaborative,multicultural work environment with a team of dedicated professionals,fostering innovation and teamwork.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Engineer- Controls & Automation
Engineer- Controls & Automation

Ingersoll-Rand plc • Pune District

On-site
INR 900,000 - 1,500,000
Leave Encashments
Maternity/Paternity Leaves
Health Insurance
+2
Engineer- Controls And Automation
Engineer- Controls And Automation

ILC Dover • Pune District

On-site
INR 1,200,000 - 1,800,000
Engineer- Controls & Automation
Engineer- Controls & Automation

Ingersoll Rand • Ghaziabad District

On-site
INR 900,000 - 1,400,000
Software Engineer
Software Engineer

Ingersoll Rand Inc. • Bengaluru

On-site
INR 1,200,000 - 2,200,000
Stock options (Employee Ownership)
Yearly performance‑based bonus
Leave encashments
+6
Software Engineer
Software Engineer

Ingersoll Rand • Bengaluru

On-site
INR 1,200,000 - 1,800,000
Stock options / Employee Ownership
Yearly bonus
Leave encashments
+4
Software Engineer
Software Engineer

ILC Dover • Bengaluru Urban

On-site
INR 1,200,000 - 2,400,000
Stock options
Yearly performance-based bonus
Leave Encashments
+5
Software Engineer
Software Engineer

Ingersoll-Rand plc • Bengaluru

On-site
INR 1,200,000 - 2,500,000
Stock options
Yearly performance-based bonus
Leave encashments
+5
Software Engineer
Software Engineer

Ingersoll Rand Compressor Systems & Services • Bengaluru

On-site
INR 1,100,000 - 2,200,000
Stock options
Yearly bonus
Leave encashments
+6
Walk-in | PLC & HMI Programmer / Automation Engineer
Walk-in | PLC & HMI Programmer / Automation Engineer

Lalit Kapasiya • Faridabad District

On-site
INR 1,500,000 - 2,300,000
Competitive salary based on experience
Travel allowances for site visits
Performance incentives
PLC Programmer
PLC Programmer

Industry Pro • Bhopal

On-site
INR 457,000 - 547,000