New Product Introduction Manager

Gunnebo Entrance Control

Ahmedabad District

On-site

INR 1,800,000 - 3,000,000

Full time

14 days+

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Gunnebo Entrance Control is seeking an experienced NPI Manager to drive manufacturing readiness for new and significantly changed products, ensuring smooth transitions from development to series production.

You will lead the Manufacturing Readiness Review (MRR) across global projects, coordinate R&D, Manufacturing, Quality and Supply Chain, and embed DFM/DFA, with a strong focus on risk identification, release of documentation, and readiness for production launches.

Qualifications

  • Bachelor's or master's degree in Mechanical, Manufacturing, Industrial, Mechatronics.
  • 10+ years of relevant experience in NPI, industrialisation, manufacturing engineering or product development.
  • Proven experience transitioning engineered products from development through manufacturing readiness into series-production launch.
  • Strong practical knowledge of DFM/DFA, manufacturing processes, assembly methods, tooling and production-line readiness.
  • Strong understanding of the NPD/NPI lifecycle including design development, prototype builds, validation, industrialisation and ramp-up.
  • Experience leading structured Manufacturing Readiness Reviews or equivalent production-readiness processes within cross-functional product-development environments.
  • Strong experience across R&D, Manufacturing, Quality, Supply Chain and Procurement.
  • Practical understanding of BOM/PDM/ERP maturity, engineering change control, manufacturing documentation and production release.
  • Good understanding of product costing, manufacturing cost drivers, supplier readiness, inventory management and long-lead components.
  • Strong analytical and problem-solving capability with a practical, hands-on approach to resolving design-to-manufacturing issues.
  • Ability to influence, challenge and drive actions across global functions and manufacturing locations without relying on direct functional authority.
  • Experience with electromechanical products, industrial equipment, automation, entrance control/security products or similar engineered products would be advantageous.

Responsibilities

  • Lead and drive the Manufacturing Readiness Review (MRR) process globally across GEC product-development projects.
  • Establish the NPI and manufacturing-readiness plan for new products, platforms and significant product changes from development through production launch.
  • Coordinate R&D, Manufacturing, Supply Chain, Quality and other stakeholders to ensure readiness deliverables are completed at the required project maturity.
  • Drive DFM/DFA and manufacturing involvement early in development, identifying manufacturability and cost risks.
  • Ensure product information required for manufacturing readiness is complete and released (drawings, BOMs, software/firmware, spare parts, test instructions, packaging).
  • Drive readiness of the production system: ERP BOMs, production-line setup, tooling, equipment and training.
  • Coordinate supply-chain readiness covering new suppliers, tooling, costs, inventory and long-lead components.
  • Ensure manufacturing quality readiness through sample approval and closure of non-conformances before launch.
  • Oversee prototype, pilot and pre-production builds to validate processes and production documentation.
  • Monitor readiness status with owners and dates, escalating unresolved risks.

Skills

Manufacturing readiness
NPI process
DFM/DFA
Cross-functional leadership
R&D collaboration
Supply chain coordination
Problem solving
Global stakeholder influence
Production launch planning
BOM/ERP familiarity

Education

Engineering degree (BSc/MSc)
Mechatronics/Industrial/Manufacturing

Tools

ERP systems
BOM management

Job description

Do you want to be part of creating a safer world? Without thinking about it, you meet us in your everyday life – at home, in transit, and at work. We are at the airport, where you commute, where you work, play and shop. Diverse in our offering, our customer outreach and in our mindset, Gunnebo Entrance Control is leading the transformation of the security business through digitalisation and connectivity for the continuous developments of smart entrance control.

If you are passionate about being part of an exciting transformation journey working with a global, multi-cultural and highly motivated organisation, this is the opportunity for you. Gunnebo Entrance Control is small enough to see your ideas come to fruition, and big enough to realise your career goals.

Role Overview

The NPI Manager is responsible for driving manufacturing readiness of new and significantly changed products across GEC globally, ensuring an effective and controlled transition from product development into repeatable series production.

Acting as the key integration point between R&D, Manufacturing, Supply Chain, Quality and other relevant functions, the NPI Manager leads the Manufacturing Readiness Review (MRR) process across product-development projects, ensuring manufacturing requirements, risks and readiness gaps are identified early, assigned to accountable owners and resolved before production launch.

The role strengthens the R&D-to-Manufacturing transition by embedding DFM/DFA, manufacturing readiness and launch preparation throughout product development, while technical and functional deliverables remain owned by the respective teams.

  • Lead and drive the Manufacturing Readiness Review (MRR) process across GEC product-development projects globally, ensuring consistent application and timely closure of readiness requirements.
  • Establish the NPI and manufacturing-readiness plan for new products, platforms and significant product changes from development through production launch.
  • Coordinate R&D, Manufacturing, Supply Chain, Quality and other relevant stakeholders to ensure manufacturing-readiness deliverables are completed at the required project maturity.
  • Drive DFM/DFA and manufacturing involvement early in product development, identifying manufacturability, assembly, process and manufacturing-cost risks before design maturity.
  • Ensure product information required for manufacturing readiness is complete and appropriately released, including drawings, BOMs, software/firmware, spare parts, test instructions, packaging and relevant product documentation.
  • Drive readiness of the production system, including ERP BOMs, production-line setup, assembly instructions, tooling and equipment, test equipment, pre-production builds and operator training.
  • Coordinate supply-chain readiness covering new suppliers, supplier tooling, production-volume component costs, inventory planning and critical/long-lead components.
  • Ensure manufacturing quality readiness through appropriate sample approval, critical-feature identification and closure of manufacturing non-conformances before production launch.
  • Drive prototype, pilot and pre-production builds to validate manufacturing processes, assembly methods, tooling, test methods and production documentation prior to series production.
  • Monitor manufacturing-readiness status and key production-readiness indicators, ensuring gaps have clear owners, actions and completion dates, and escalation unresolved risks that could affect production launch.
  • Ensure product-cost and manufacturing assumptions are validated as the product approaches production, working with relevant functions where gaps against agreed targets are identified.
  • Capture industrialisation and first-build lessons learned and apply them across future product introductions to strengthen consistent and repeatable NPI practices across GEC.
Requirements
  • Bachelor's or master's degree in Mechanical, Manufacturing, Industrial, Mechatronics.
  • 10+ years of relevant experience, with significant experience in New Product Introduction, industrialisation, manufacturing engineering or product development.
  • Proven experience transitioning engineered products from development through manufacturing readiness into series-production launch.
  • Strong practical knowledge of DFM/DFA, manufacturing processes, assembly methods, tooling, fixtures and production-line readiness.
  • Strong understanding of the complete NPD/NPI lifecycle, including design development, prototype builds, validation, industrialisation and production ramp-up.
  • Experience leading structured Manufacturing Readiness Reviews or equivalent production-readiness processes within cross-functional product-development environments.
  • Strong experience working across R&D, Manufacturing, Quality, Supply Chain and Procurement.
  • Practical understanding of BOM/PDM/ERP maturity, engineering change control, manufacturing documentation and production release.
  • Good understanding of product costing, manufacturing cost drivers, supplier readiness, inventory management and long-lead components.
  • Strong analytical and problem-solving capability with a practical, hands-on approach to resolving design-to-manufacturing issues.
  • Ability to influence, challenge and drive actions across global functions and manufacturing locations without relying on direct functional authority.
  • Experience with electromechanical products, industrial equipment, automation, entrance control/security products or similar engineered products would be advantageous.
About us

The Gunnebo Group is a global leader in security, offering innovative products and services to protect and control the flow of people, and to safely secure valuables. Through our businesses and customers in retail, public transport, public and commercial buildings, industrial and high-risk sites and banking, we operate worldwide through our 3,400 employees, 25 country locations and 10 production facilities. Serving customers in over 100 markets, together we create a safer world.

Gunnebo Entrance Control specialises in entrance control solutions that enable our customers with increased efficiency, safety and end-user experience. Our wide range of products are designed to create a safe environment without restricting freedom of movement, whether it is to enter the lobby of a company, a supermarket, an entertainment area, an industrial area or public transport. We shape the future of people flow management.

Diversity Statement

Gunnebo Entrance Control is an equal opportunity employer. We know that great minds don’t think alike, and it takes all kinds of minds to make our products so unique. We welcome applications from all backgrounds and employment decisions are made without regards to race, colour, religion, origin, sexual orientation, gender identity or expression, age, disability, or any other dimension of diversity.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Program Manager
Program Manager

Gunnebo Entrance Control • Ahmedabad District

On-site
INR 4,000,000 - 7,000,000
Product Marketing Manager
Product Marketing Manager

GUNNEBO ENTRANCE CONTROL • Gurugram District

Hybrid
INR 2,200,000 - 3,600,000
Electrical Design Engineer
Electrical Design Engineer

Gunnebo Safe Storage AB • Ahmedabad District

On-site
INR 600,000 - 1,000,000
Senior Developer
Senior Developer

Gunnebo Entrance Control • Gurugram District

Hybrid
INR 1,200,000 - 1,800,000
Finance and Process Manager
Finance and Process Manager

Gunnebo Entrance Control • Gurugram District

On-site
INR 2,300,000 - 3,500,000
IT Manager
IT Manager

Gunnebo Entrance Control • Gurugram District

On-site
INR 1,200,000 - 1,800,000
Regional Sales Manager - West
Regional Sales Manager - West

Gunnebo Entrance Control • Thane

On-site
INR 1,200,000 - 1,800,000
New Product Manufacturing Engineer Seniore
New Product Manufacturing Engineer Seniore

0063 Applied Materials India Private Limited • Bengaluru

On-site
INR 1,500,000 - 2,100,000
Global Program Development Manager
Global Program Development Manager

Grundfos • Chennai

Hybrid
INR 4,500,000 - 6,000,000
Manufacturing Engineer
Manufacturing Engineer

nVent • Bengaluru

On-site
INR 900,000 - 1,300,000