Lead Engineer Power Electronics

Ather Energy

Bengaluru

On-site

INR 3,500,000 - 5,200,000

Full time

14 hours ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Ather Energy’s Power Electronics team is seeking a Design Engineer to design and develop core electrical hardware subsystems, including motor drives, chargers, and power conversion units. You will own subsystems end-to-end from concept to production, partner with HW Architects on trade-offs, and lead simulations, PCB layout, and validation activities.

You will collaborate with firmware, system teams and suppliers, drive platform reuse, mentor junior engineers, and ensure high reliability in a

Qualifications

  • B.Tech/M.Tech in Electrical or Electronics Engineering.
  • 7–10 years of experience in power electronics hardware design.
  • Has taken a product through at least one full design cycle (design, manufacturing, field performance and design improvements).
  • Strong expertise in power semiconductor devices, gate drivers and converter/inverter topologies.

Responsibilities

  • Lead the design and development of power electronic subsystems such as on/off-board chargers, DC-DC converters, motor drives and BMS.
  • Own the subsystem from concept through validation, production and field support, working with the HW Architect on cost and design trade-offs.
  • Lead or carry out simulation, schematic design and PCB layout, with attention to component selection, derating and thermal design.
  • Drive reuse of platforms and proven designs to reduce time to market and cost, and improve quality.
  • Plan and oversee prototyping, testing and validation, including EMI/EMC and environmental testing.
  • Lead DFMEA reviews, apply DFM/DFA/DFR principles and build lessons learnt into new designs.
  • Drive root cause analysis and corrective actions (RCA/CAPA) for failures found in testing, manufacturing builds or the field.
  • Work with NPD and Operations on manufacturing test plans, yield improvement and support for designs already in production.
  • Work with firmware and system teams to define and implement control and firmware requirements.
  • Work with suppliers and component manufacturers to evaluate technologies and resolve technical issues.
  • Mentor junior engineers and guide them through challenging, high-pressure projects.

Skills

Power electronics
Gate drivers
Converter topologies
EMI/EMC
Analog/digital design
Thermal management
Embedded C/C++
Digital control

Education

Electrical/Electronics Engineering degree

Tools

PSIM
MATLAB/Simulink
LTspice
OrCAD/Allegro

Job description

Reporting to Team Lead - Power Electronics/Architect - Power Electronics

Department Name : Hardware Engineering

About the Team and the Role:

The Power Electronics team at Ather is responsible for the design and development of the core electrical and electronic hardware subsystems that literally adds the power to our products. They are responsible for the design and implementation of the motor drive, on-board and off-board chargers including our public charging infrastructures, power conversion units etc. It ensures Ather’s superior product positioning through cutting-edge technology , competitor benchmarking and platform reuse while adhering to strict QS standards and corporate values.

This role is for a Power Electronic Design Engineer who will work on analysis and design of power electronic circuits focusing on power devices (Silicon and/or WBG), magnetics and capacitors, and other digital and analog peripherals.

Responsibilities:
  • Lead the design and development of power electronic subsystems such as on/off-board chargers, DC-DC converters, motor drives and BMS, meeting performance, cost and reliability targets.
  • Own the subsystem from concept through validation, production and field support, working with the HW Architect on cost and design trade-offs.
  • Lead or carry out simulation, schematic design and PCB layout, with attention to component selection, derating and thermal design.
  • Drive reuse of platforms and proven designs to reduce time to market and cost, and improve quality.
  • Plan and oversee prototyping, testing and validation, including EMI/EMC and environmental testing.
  • Lead DFMEA reviews, apply DFM/DFA/DFR principles and build lessons learnt into new designs.
  • Drive root cause analysis and corrective actions (RCA/CAPA) for failures found in testing, manufacturing builds or the field.
  • Work with NPD and Operations on manufacturing test plans, yield improvement and support for designs already in production.
  • Work with firmware and system teams to define and implement control and firmware requirements.
  • Work with suppliers and component manufacturers to evaluate technologies and resolve technical issues.
  • Mentor junior engineers and guide them through challenging, high-pressure projects.
  • Identify workflow constraints, address challenges proactively and elevate issues when needed.
  • Maintain design documentation and follow company design and development processes.
Experience and Qualifications:
  • B.Tech/M.Tech with specialization in Electrical or Electronics Engineering.
  • 7–10 years of experience in power electronics hardware design.
  • Has taken a product through at least one full design cycle (design, manufacturing, field performance and design improvements).
Must Have Competencies:
  • Strong expertise in power semiconductor devices, gate drivers and converter/inverter topologies (AC-DC, DC-DC, motor drives).
  • In-depth understanding of switching waveforms and semiconductor losses, with experience in loss modeling.
  • Good understanding of analog and digital circuit design.
  • Expertise in noise, EMI/EMC and signal integrity in high-power designs.
  • Proficient with simulation and design tools (PSIM, MATLAB/Simulink, LTspice, OrCAD/Allegro).
  • Hands-on expertise with lab equipment (DSO, DMM, power supplies, electronic loads, data loggers).
  • Sound knowledge of magnetics design, thermal management and component derating.
Good to Have Competencies:
  • Product development experience on battery chargers, motor controllers or BMS.
  • Working knowledge of embedded C/C++ and digital control of power converters.
  • Familiarity with automotive and electrical safety standards (AIS, ISO 26262, IEC).
  • Understanding of electronics manufacturing processes.
Want to know more?

At Ather, we’ve built India’s first intelligent scooter, from scratch. Based on the philosophy of clean design and smart technology, we are transforming the urban commute experience. We are expanding in India, and in the coming years, we look forward to scaling up and launching more products globally. Today, our product offerings include the Ather 450X, 450S, 450 Apex, and Rizta. Beyond the product, we are also setting up an extensive charging network and re-imagining end-to-end ownership experience. To know more, check out our Careers site and our Substack.

Be You, With Us

The Ather story doesn't write itself - our people do. We believe everyone is equal, but not the same. Diversity is our strength, and building an inclusive and equitable workplace begins with acknowledging and embracing our differences. We are an equal opportunity employer, and our team reflects a wide range of identities, experiences, and perspectives - all united by a shared passion to shape the Ather journey.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Lead Engineer-Power Electronics
Lead Engineer-Power Electronics

Ather Energy • Bengaluru

On-site
INR 1,200,000 - 1,800,000
Motor Engineer
Motor Engineer

Ather Energy • Bengaluru

On-site
INR 1,500,000 - 2,100,000
Module Lead - Manufacturing Engineering Process
Module Lead - Manufacturing Engineering Process

Ather Energy • Chhatrapati Sambhajinagar District

On-site
INR 2,500,000 - 4,000,000
Architect - Hardware Packaging
Architect - Hardware Packaging

Ather Energy • Bengaluru

On-site
INR 2,800,000 - 4,000,000
Facility & Tooling Engineer Hosur
Facility & Tooling Engineer Hosur

Ather Energy Limited • Krishnagiri

Remote
INR 1,200,000 - 2,200,000
CI Tech Operations Specialist
CI Tech Operations Specialist

Ather Energy • Bengaluru

On-site
INR 900,000 - 1,500,000
Associate Lead - TechOps
Associate Lead - TechOps

Ather Energy • Bengaluru

On-site
INR 2,500,000 - 3,800,000
Test Engineer
Test Engineer

Ather Energy • Hosur

On-site
INR 800,000 - 1,200,000
Module Lead - Manufacturing Engineering Process
Module Lead - Manufacturing Engineering Process

Ather Energy • Bengaluru

On-site
INR 2,500,000 - 4,000,000
Part Development Manager
Part Development Manager

Ather Energy • Bengaluru

On-site
INR 900,000 - 1,600,000