Engineer- EMI EMC Testing

Eaton Corporation; Pune District; On-site; INR 700,000 - 1,100,000; Full time

Job summary

Eaton India Innovation Center in Pune invites an Engineer in Test Lab to perform EMI/EMC compliance and pre‑compliance testing on electrical and electronic products. You will operate EMC test equipment, prepare test setups and reports, and support lab safety and equipment upgrades.

The role requires hands-on EMI/EMC testing experience in semi-anechoic or anechoic chambers, plus knowledge of IEC CISPR 25, ISO 11452, and related standards.

Qualifications

• Master's or Bachelor's in Electrical/Electronics with EMI/EMC testing experience.
• Hands-on EMI/EMC testing in semi-anechoic or anechoic chambers.
• Familiar with IEC CISPR 25, ISO 11452, FCC, MIL and related standards; strong documentation skills.

Responsibilities

• Perform EMI/EMC compliance and pre‑compliance testing on electrical products.
• Set up and operate EMC test equipment and generate test reports.
• Maintain lab equipment and coordinate test requests; support safety initiatives.
• Assist in planning lab upgrades and equipment road-mapping.
• Coordinate with engineering, quality and product development during validation.

Skills

EMI/EMC testing

IEC CISPR 25

ISO 11452

LabVIEW

Python

MATLAB

Troubleshooting

Test planning

Education

Master's in Electrical/Electronics

Bachelor's in Electrical/Electronics

Tools

R&S EMI Receiver

TDK Emissions Lab

ETS-Lindgren TILE

Job description

What you’ll do:

Eaton announced, on June 11, 2026, the intent to combine its Mobility Group (including both the Vehicle and eMobility segments) with a new company. We expect to complete this process by the end of the first half of 2027. The compensation and benefits that will initially be offered for this position are based on Eaton's plans, programs and practices. If you are offered and accept this position and are actively employed by the Mobility Group when the transaction closes, the new company will provide further details to employees concerning compensation and benefits at that time.

Eaton is a power management company with 2024 sales of $24.9 billion. Its energy-efficient solutions help customers effectively manage electrical, hydraulic and mechanical power more reliably, safely and sustainably. The company is dedicated to improving the quality of life and the environment through the use of power management technologies and services. Eaton employs 99,000 people worldwide and sells products to customers in more than 160 countries.. For more information, visit Eaton.com.

Eaton’s Enterprise CoE located in Pune, India has an opening for an Engineer in Test lab team within the Eaton India Innovation Center.This role is established for EMI/EMC Laboratory in EIIC Mobility Group. The core responsibilities of this position are following:

• Perform EMI/EMC compliance and pre-compliance testing on electrical and electronic products & validate products as per applicable IEC /CISPR 25 and ISO 11452 Standards. Prepare test setup as per test plan and standard, perform the tests, monitor test results and generate a test report. Maintain lab equipment, manage & track test requests, implement and maintain 5S activities, support safety initiative, and participate in planning of lab and equipment upgrades Validate products by performing EMI/EMC tests as per applicable IEC/ CISPR 25 and ISO 11452/MIL/ RTCA-DO Standards. Prepare test setup and operate EMC test equipment, including: Spectrum analyzers EMI receivers Signal generators Antennas LISNs RF amplifiers Oscilloscopes ESD, EFT, Surge, and Conducted Immunity test systems Conduct emissions and immunity testing according to applicable standards (CISPR, IEC, ISO, FCC, MIL-STD, EN standards, etc.). Prepare test samples, cabling configurations, and test environments, monitor test results and generate a test report. Maintain lab equipment, manage & track test requests, implement and maintain 5S activities, support safety initiative, and participate in planning of lab and equipment upgrades.
• Validate products by performing EMI/EMC tests as per applicable IEC/ CISPR 25 and ISO 11452/MIL/ RTCA-DO Standards. Prepare test setup and operate EMC test equipment, including: Spectrum analyzers EMI receivers Signal generators Antennas LISNs RF amplifiers Oscilloscopes ESD, EFT, Surge, and Conducted Immunity test systems Conduct emissions and immunity testing according to applicable standards (CISPR, IEC, ISO, FCC, MIL-STD, EN standards, etc.). Prepare test samples, cabling configurations, and test environments, monitor test results and generate a test report. Maintain lab equipment, manage & track test requests, implement and maintain 5S activities, support safety initiative, and participate in planning of lab and equipment upgrades.
• Perform EMI/EMC compliance and pre-compliance testing on electrical and electronic products.
• Set up and operate EMC test equipment, including: Spectrum analyzers EMI receivers Signal generators Antennas LISNs RF amplifiers Oscilloscopes ESD, EFT, Surge, and Conducted Immunity test systems Conduct emissions and immunity testing according to applicable standards (CISPR, IEC, ISO, FCC, MIL-STD, EN standards, etc.).
• Assist engineers in troubleshooting EMI/EMC failures and implementing corrective actions.
• Maintain calibration records and ensure equipment is functioning properly.
• Support chamber maintenance and routine laboratory housekeeping activities.
• Coordinate with engineering, quality, and product development teams during validation and certification activities.
• Assist in developing test procedures and work instructions.
• Support capital equipment and road mapping process for the test lab to identify equipment upgrades, capacity increases, and new technologies to be incorporated.
• Maintain inventory, order miscellaneous materials & other low value assets as per set-up/tests requirements.
• Monitor & provide quality performance trends.

Qualifications:

• Master's degree with 1 to 2 years of experience, or Bachelor's degree in Electrical, Electronics, Power Electronics, Mechatronics, or Instrumentation Engineering with 3 to 5 years of relevant experience in the EMI/EMC testing domain.
• 2 to 4 years of hands‑on experience in EMI/EMC testing within semi‑anechoic or fully anechoic chamber

Skills:

• Sound knowledge of different EMC Standards like IEC, CISPR 25 and ISO 11452, FCC, MIL, DO160, ISO, RTCA-DO;IEC 61000 etc.
• Hands on experience of performing different EMC tests e.g. Radiated emission, Radiated immunity, Conducted Emission, Conducted Immunity, ESD, Surge, BCI, EFT, VDI etc.
• Maintenance experience of different EMC equipment’s like EMI Receiver, Antennas, filters, pre‑amplifiers, Signal generator, field probe, RF amplifiers, Oscilloscopes,LISN, etc.
• Maintenance experience of different Semi / Full Anechoic EMC chamber components like Turn table, Antenna Mast, Chamber door etc.
• Hands on experience of different chamber manufacturer software like TDK Emissions Lab and Radiated Immunity Lab, R&S EMC 32, ETS‑Lindgren TILE etc.
• Ability to develop test plans, procedures and setups.
• Strong troubleshooting and root cause analysis skills.

Desired:

• Hands on Experience in EMC testing of Automotive and Electrical products.
• Knowledge on different anechoic chamber parameters like NSA, SVSWR, FU, shielding effectiveness etc. and relevant standards.
• Experience with LabVIEW, Python, MATLAB or automation tools.
• Knowledge of APQP, DFMEA and DVP&R processes.

Special Skills:

• Understanding of product certification e.g. CE, CSA, UL, VDE etc.
• Sound knowledge on EMC test safety
• Design for Six Sigma / DMAIC"

Accountability – Takes complete responsibility of assigned tasks and delivers results despite of roadblocks

Passion - Pursues everything with drive and motivates others around to contribute towards the cause

Resourceful – Works across the boundaries to get the desired things done timely

Problem Solving - Uses rigorous logic and methods to solve difficult problems with effective solutions, Looks beyond the obvious solutions and comes up with creative/ innovative proposals

Learner - Takes efforts to upskill self and shares the learnings with broader team proactively

Transparency - Should create open and trusting environment in the team