BMS Hardware Design Engineer (MV / HV Ba...
LNT/BHDE-HBM/1922719
- DEIC-L&T Precision Engineering & Systems IC
- Bengaluru - L&T Tech Park S2
End Date 18 May 2027
Required Experience 6 - 10 years
Knowledge & Posting Location
BMS Design Firmware PCB Design Battery Management Systems IEC 61508 DFMEA DFT
Bachelor of Technology (BTech)
Job Description
BMS Hardware Design Engineer (MV / HV Battery Management Systems)
Department:R&D, Power Electronics Experience:6–10 years
Location:Bangalore Reports to:Head of R&D
Role Summary
The BMS Hardware Design Engineer owns the hardware design of master and slave battery management boards for medium- and high-voltage battery systems. You will be working on the BMS for C&I, utility applications. BMS is built with modular master - slave architecture. Need to contribute for BMS design from concept through schematic, layout, bring-up, validation, certification and production support.
System-Level Features
- Scalable and modular architecture, with three slave versions (18S, 54S, 108S).
- Isolation rating of 2.2 kV DC at system level.
- Safety features including HVIL monitoring, IMD and contactor weld detection.
- Aggregates and reports storage system information over CAN 2.0; compatible with the TuringX tool for live tracking, monitoring, configuration and logging.
Key Responsibilities
BMS Hardware Architecture and Design
- Define hardware architecture for master and slave BMS boards across 18S, 54S, 108S up to 1500Vdc.
- Design schematics and component selection for cell monitoring AFEs, isolated ISO-SPI daisy chains, master controller, isolated HV measurement, current sense and contactor drivers.
- Design wide-input auxiliary power supplies with protection, isolation and low quiescent current.
- Derive hardware requirements from product specifications and system requirements, with traceability.
Cell Monitoring and Balancing
- Design high-accuracy cell voltage and temperature measurement chains including filtering, multiplexing and calibration provisions.
- Design passive balancing circuits with thermal analysis and derating.
- Design the isolated ISO-SPI communication interface between slaves and master, including transformer/coupling selection and robustness to noise.
High-Voltage Measurement, Isolation and Safety
- Design isolated high-voltage measurement channels (0–1000V, ±1V; extension to 1500V) with precision dividers and isolated amplifiers/ADCs.
- Implement pack current measurement using Hall sensors, and contactor drive and feedback circuits for positive, negative and precharge contactors.
- Design HVIL, insulation monitoring (IMD) and contactor weld detection circuits.
- Specify creepage/clearance and isolation barriers to meet the 2.2 kV DC system-level isolation rating and the applicable standards.
- Design hardware protections: over/under-voltage, over-current, short circuit, over/under-temperature and regen protection.
PCB Layout, Mechanical and Thermal
- Guide and review PCB layout: stackup, HV spacing, high-density cell-sense routing, EMI/EMC best practice and thermal management.
- Work with mechanical teams on enclosures, connectors, harnessing and compact form factors.
- Perform worst-case analysis, thermal analysis and simulation (LTspice or equivalent) on critical circuits.
Interfaces and Firmware Collaboration
- Define MCU selection, pin mapping and peripheral usage with the BMS firmware team (CAN 2.0, ISO-SPI, SD card logging, ADC, GPIO).
- Support firmware bring-up, calibration of cell and HV measurement, and hardware diagnostics.
- Support integration with PCS/inverters, battery racks and the TuringX monitoring and configuration tool.
Validation, Compliance and Production
- Plan and execute board bring-up, functional, accuracy, isolation (hipot), thermal and environmental testing.
- Support EMI/EMC, safety and applicable standards compliance (e.g., IEC 62619, UL 1973, IEC 61508 / ISO 13849 functional safety where relevant).
- Perform DFMEA/FMEDA, DFM/DFT reviews and support production, test fixtures and field-failure analysis.
Leadership and Collaboration
- Mentor junior hardware engineers; review schematics, layouts and test reports.
- Work with firmware, systems, mechanical, test, procurement and customers on technical queries.
- Own hardware documentation: design specifications, BOMs, test plans and release notes.
Required Qualifications
- B.E./B.Tech in Electronics, Electrical, Instrumentation or a related field. M.E./M.Tech preferred.
- 6–10 years of hardware design experience, with at least 3 years on BMS or battery-monitoring products (EV, ESS or C&I).
- Hands‑on experience with multi-cell monitoring AFEs (e.g., TI BQ79xxx, ADI LTC68xx/ADBMS, NXP MC33771 or similar) and isolated daisy-chain communication (ISO-SPI / isoSPI).
- Strong knowledge of high‑voltage isolated measurement, insulation monitoring, contactor drive and HVIL design.
- Strong command of mixed‑signal and analog design: precision references, ADCs, op‑amps, filtering, calibration and error budgeting.
- Proficiency in wide‑input power supply design (isolated and non‑isolated) and protection circuits.
- Working knowledge of CAN / CAN FD hardware, and MCU‑based board design (STM32, TI C2000 or similar).
- Proficiency in schematic and layout tools (Altium, OrCAD or similar) and simulation tools (LTspice, PSpice).
- Hands‑on debugging with oscilloscopes, isolated probes, precision DMMs, hipot testers and battery cyclers/emulators.
- Understanding of EMI/EMC, safety standards, creepage/clearance and DFMEA.
Preferred Qualifications
- Experience with HV systems, utility‑scale ESS or C&I BMS.
- Experience with functional safety (ISO 26262, IEC 61508) and BMS certifications (UL 1973, IEC 62619, AIS-156).
- Experience with active balancing, SOC/SOH estimation hardware support and cell chemistry characteristics (LFP, NMC).
- Experience with wireless BMS concepts, SD-card/data logging and diagnostic tooling.
- Python scripting for test automation; familiarity with Git, Jira and PLM tools.
- Strong analytical, debugging and root‑cause skills
- Clear technical communication and documentation
- Ownership, collaboration and mentoring
- Ability to deliver to schedule in a fast‑paced R&D environment
KPIs
- On‑time delivery of hardware design milestones and releases
- First‑pass design success and measurement accuracy against specification
- Field failure rate and defect closure time
- Compliance and certification readiness, and design quality metrics