Battery Management System Hardware Design Engineer

Larsen & Toubro Ltd

Bengaluru

On-site

INR 4,500,000 - 7,000,000

Full time

3 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Larsen & Toubro Ltd in Bengaluru is seeking a BMS Hardware Design Engineer to own hardware design of master and slave BMS boards for medium- and high-voltage battery systems. You will work on the BMS for C&I and utility applications, from concept through schematic, layout, bring-up, validation and production support.

Role requires 6–10 years of hardware design experience, and hands-on debugging with HV test equipment.

Qualifications

  • B.E./B.Tech in Electronics/Electrical/Instrumentation or related field.
  • 6–10 years hardware design experience with BMS background.
  • Experience with BMS or battery-monitoring products (EV/ESS/C&I).
  • Knowledge of HV isolation, insulation monitoring and HVIL.
  • Can/CAN FD hardware and MCU-based board design experience.
  • Hands-on debugging with HV test gear and probes.

Responsibilities

  • Define hardware architecture for BMS boards up to 1500V.
  • Design schematics and select components for AFEs and isolation.
  • Design HV measurement channels and protection schemes.
  • Layout and thermal management with mechanical teams.
  • Support firmware bring-up and system integration.
  • Lead and mentor junior hardware engineers.

Skills

BMS hardware design
High-voltage safety
System-level architecture
Debugging and test methods
CAN/CAN FD familiarity

Education

B.E./B.Tech in Electronics/Electrical/Instrumentation
M.E./M.Tech preferred

Tools

Altium
OrCAD
LTspice
PSpice
Oscilloscope
DMM

Job description

BMS Hardware Design Engineer (MV / HV Battery Management Systems) BMS Hardware Design Engineer (MV / HV Battery Management Systems) Department: R&D, Power Electronics Experience: 6–10 years Location: Bangalore Reports to: Head of R&D

Role Summary

The BMS Hardware Design Engineer owns the hardware design of master and slave battery management boards for medium- and high-voltage battery systems. You will be working on the BMS for C&I, utility applications. BMS is built with modular master - slave architecture. Need to contribute for BMS design from concept through schematic, layout, bring-up, validation, certification and production support.

System-Level Features

Scalable and modular architecture, with three slave versions (18S, 54S, 108S). Isolation rating of 2.2 kV DC at system level. Safety features including HVIL monitoring, IMD and contactor weld detection. Aggregates and reports storage system information over CAN 2.0; compatible with the TuringX tool for live tracking, monitoring, configuration and logging.

Key Responsibilities
  • BMS Hardware Architecture and Design Define hardware architecture for master and slave BMS boards across 18S, 54S, 108S up to 1500Vdc. Design schematics and component selection for cell monitoring AFEs, isolated ISO-SPI daisy chains, master controller, isolated HV measurement, current sense and contactor drivers. Design wide-input auxiliary power supplies with protection, isolation and low quiescent current. Derive hardware requirements from product specifications and system requirements, with traceability.
  • Cell Monitoring and Balancing Design high-accuracy cell voltage and temperature measurement chains including filtering, multiplexing and calibration provisions. Design passive balancing circuits with thermal analysis and derating.
  • Design the isolated ISO-SPI communication interface between slaves and master, including transformer/coupling selection and robustness to noise.
  • High-Voltage Measurement, Isolation and Safety Design isolated high-voltage measurement channels (0–1000V, ±1V; extension to 1500V) with precision dividers and isolated amplifiers/ADCs. Implement pack current measurement using Hall sensors, and contactor drive and feedback circuits for positive, negative and precharge contactors. Design HVIL, insulation monitoring (IMD) and contactor weld detection circuits. Specify creepage/clearance and isolation barriers to meet the 2.2 kV DC system-level isolation rating and the applicable standards. Design hardware protections: over/under-voltage, over-current, short circuit, over/under-temperature and regen protection.
  • PCB Layout, Mechanical and Thermal Guide and review PCB layout: stackup, HV spacing, high-density cell-sense routing, EMI/EMC best practice and thermal management. Work with mechanical teams on enclosures, connectors, harnessing and compact form factors. Perform worst-case analysis, thermal analysis and simulation (LTspice or equivalent) on critical circuits.
  • Interfaces and Firmware Collaboration Define MCU selection, pin mapping and peripheral usage with the BMS firmware team (CAN 2.0, ISO-SPI, SD card logging, ADC, GPIO). Support firmware bring-up, calibration of cell and HV measurement, and hardware diagnostics. Support integration with PCS/inverters, battery racks and the TuringX monitoring and configuration tool.
  • Validation, Compliance and Production Plan and execute board bring-up, functional, accuracy, isolation (hipot), thermal and environmental testing. Support EMI/EMC, safety and applicable standards compliance (e.g., IEC 62619, UL 1973, IEC 61508 / ISO 13849 functional safety where relevant). Perform DFMEA/FMEDA, DFM/DFT reviews and support production, test fixtures and field-failure analysis.
  • Leadership and Collaboration Mentor junior hardware engineers; review schematics, layouts and test reports. Work with firmware, systems, mechanical, test, procurement and customers on technical queries. Own hardware documentation: design specifications, BOMs, test plans and release notes.
Required Qualifications

B.E./B.Tech in Electronics, Electrical, Instrumentation or a related field. M.E./M.Tech preferred. 6–10 years of hardware design experience, with at least 3 years on BMS or battery-monitoring products (EV, ESS or C&I). Hands-on experience with multi-cell monitoring AFEs (e.g., TI BQ79xxx, ADI LTC68xx/ADBMS, NXP MC33771 or similar) and isolated daisy-chain communication (ISO-SPI / isoSPI). Strong knowledge of high-voltage isolated measurement , insulation monitoring, contactor drive and HVIL design. Strong command of mixed-signal and analog design: precision references, ADCs, op-amps, filtering, calibration and error budgeting. Proficiency in wide-input power supply design (isolated and non-isolated) and protection circuits. Working knowledge of CAN / CAN FD hardware, and MCU-based board design (STM32, TI C2000 or similar). Proficiency in schematic and layout tools (Altium, OrCAD or similar) and simulation tools (LTspice, PSpice). Hands-on debugging with oscilloscopes, isolated probes, precision DMMs, hipot testers and battery cyclers/emulators. Understanding of EMI/EMC, safety standards, creepage/clearance and DFMEA.

Preferred Qualifications

Experience with HV systems, utility-scale ESS or C&I BMS. Experience with functional safety (ISO 26262, IEC 61508) and BMS certifications (UL 1973, IEC 62619, AIS-156). Experience with active balancing, SOC/SOH estimation hardware support and cell chemistry characteristics (LFP, NMC). Experience with wireless BMS concepts, SD-card/data logging and diagnostic tooling. Python scripting for test automation; familiarity with Git, Jira and PLM tools.

Key Competencies

Strong analytical, debugging and root-cause skills Safety-first design mindset for high-voltage systems Clear technical communication and documentation Ownership, collaboration and mentoring Ability to deliver to schedule in a fast-paced R&D environment

KPIs

On-time delivery of hardware design milestones and releases First-pass design success and measurement accuracy against specification Field failure rate and defect closure time Compliance and certification readiness, and design quality metrics

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

BMS Hardware Design Engineer (MV / HV Battery Management Systems)
BMS Hardware Design Engineer (MV / HV Battery Management Systems)

L & T Case Equipment Private Limited • Bengaluru

On-site
INR 1,500,000 - 2,100,000
BMS Hardware Design Engineer (MV / HV Battery Management Systems)
BMS Hardware Design Engineer (MV / HV Battery Management Systems)

Larsen & Toubro Limited • Bengaluru

On-site
INR 1,200,000 - 2,400,000
BMS Hardware Design Engineer (MV / HV Ba...
BMS Hardware Design Engineer (MV / HV Ba...

Larsen & Toubro Limited • Bengaluru

On-site
INR 2,800,000 - 4,200,000
Senior BMS Hardware Design Engineer – Analog & Digital Circuits Copy title
Senior BMS Hardware Design Engineer – Analog & Digital Circuits Copy title

Quess Corp Limited • Bengaluru

On-site
INR 1,800,000 - 2,400,000
Battery Management Systems- Design Engineer
Battery Management Systems- Design Engineer

Altraize • Chennai

On-site
INR 3,000,000 - 5,200,000
Battery Management Systems- Design Engineer
Battery Management Systems- Design Engineer

Altraize • Andhra Pradesh

On-site
INR 2,500,000 - 4,500,000
BMS Hardware
BMS Hardware

Bajaj Auto Limited • India

On-site
INR 1,200,000 - 2,400,000
Hardware Project Manager – BMS (BESS Domain)
Hardware Project Manager – BMS (BESS Domain)

Robert Bosch Group • Bengaluru

On-site
INR 2,500,000 - 4,000,000
GM Electronics
GM Electronics

VSL PowerHive • Chennai District

On-site
INR 4,000,000 - 7,000,000
BMS Hardware Engineer (Analog)
BMS Hardware Engineer (Analog)

Bosch Global Software Technologies • Coimbatore District

On-site
INR 600,000 - 1,200,000