Application Software Design Engineer

Larsen & Toubro Limited

Bengaluru

Remote

INR 800,000 - 1,800,000

Full time

5 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Larsen & Toubro Limited in Bengaluru seeks an Application Software Design Engineer — Power Electronics (E-Band) to design and implement the application layer for power converter platforms. You will work with RTOS, CAN/RS-485 stacks, and AUTOSAR components under senior guidance.

The role requires 1–5 years of embedded software experience, strong C skills, and hands-on with STM32/C2000 platforms. A BTech degree is essential, with location in Bengaluru.

Qualifications

  • 2–5 years in embedded application/system software, preferably in power electronics or motor control.
  • Solid hands-on with STM32 and C2000; able to read/write application/interface level code.
  • Working knowledge of FreeRTOS or similar RTOS; tasks, queues, semaphores, event groups.
  • Understanding of PI/PID control interactions with application logic.
  • Hands-on with CAN and RS-485/Modbus at application level.
  • Familiarity with AUTOSAR concepts at project or coursework level.
  • Experience designing state-machine driven embedded software.
  • Comfortable with CAN analyzers and measurement tools; basic JTAG/SWD debugging.
  • Strong C skills, structured design, and traceability from requirements.

Responsibilities

  • Design and implement application-layer software on STM32/C2000 platforms; state machines and sequencing.
  • Develop fault detection, protection sequencing, and diagnostic logic using control-loop outputs.
  • Manage calibration/parameter settings with EEPROM/flash-backed data and thresholds.
  • Handle CAN (J1939/proprietary) and RS-485 (Modbus) messaging in the application layer.
  • Integrate with existing RTOS tasks/queues/events at the application level.
  • Where applicable, configure Application SWCs / RTE interfaces in AUTOSAR environments.
  • Support UDS/diagnostic services and DTC handling where needed.
  • Participate in bench validation, HIL testing, and bring-up of new converter variants.
  • Write unit/integration tests and contribute to code reviews and MISRA-C cleanup.

Skills

Embedded and System Software
STM32
RTOS
CAN
RS485
Modbus
AUTOSAR
JTAG
C Language

Education

B.E./B.Tech in Electronics/Electrical/CS/Instrumentation

Job description

  • DEIC-L&T Precision Engineering & Systems IC

End Date 16 May 2027

Required Experience 1 - 5 years

Skills
Knowledge & Posting Location

Embedded and System Software STM RTOS CAN RS485 Modbus AUTOSAR JTAG C Language

Bachelor of Technology (BTech)

Job Description

Application Software Design Engineer — Power Electronics (E-Band)

Band

E-Band — Engineer

Experience

1 to 5 years

Function

R&D — Power Electronics / Embedded Systems

Domain

DC-DC converters, chargers, inverters, motor controllers (EV / industrial power conversion)

Location

Role Summary

Designs and implements the application-layer software that sits above the low-level drivers and control loops on power converter platforms — state machines, sequencing logic, diagnostics, calibration/parameter management, and host/HMI communication. Works closely with the firmware and control teams to integrate application logic with the underlying RTOS, CAN/RS-485 stacks, and (where applicable) AUTOSAR software components, under guidance from senior engineers.

Key Responsibilities

  • Design and implement application-layer software on STM32, C2000-based converter platforms — system state machines (init/standby/run/fault), sequencing, and mode management
  • Implement fault detection, protection sequencing, and diagnostic logic that consumes outputs from the control-loop (PI/PID) and driver layers
  • Develop and maintain calibration/parameter management (configurable thresholds, lookup tables, EEPROM/flash-backed settings)
  • Implement application-side CAN (J1939/proprietary) and RS-485 (Modbus) message handling — signal packing/unpacking, timeouts, fault frames
  • Integrate application logic with the existing RTOS task structure (FreeRTOS) — task/queue/event design at the application layer
  • Where the platform uses AUTOSAR, implement and configure Application SWCs / RTE interfaces under senior guidance
  • Support UDS/diagnostic service implementation (DTC handling, session control) where applicable
  • Debug end-to-end system behavior using CAN analyzer, logic analyzer, and on-target debugging (JTAG/SWD)
  • Write unit/integration tests for application logic; participate in code reviews and MISRA-C cleanup
  • Support bench validation, HIL testing, and bring-up of new converter variants

Must-Have Skills

  • Experience:2–5 years in embedded application/system software, ideally power electronics or motor-control adjacent
  • MCU platform:Solid hands-on with STM32, C2000; comfortable reading/working with STM32, C2000 code at the application/interface level
  • RTOS:Working knowledge of FreeRTOS or similar — tasks, queues, semaphores, event groups
  • Control-loop interfacing:Working understanding of PI/PID control outputs and how application logic sequences around them (not tuning ownership)
  • Protocols:Hands-on with CAN and RS-485/Modbus at the application/message-handling level
  • AUTOSAR:Familiarity with Application SWC / RTE concepts — coursework or project-level exposure is acceptable
  • State machines:Demonstrated experience designing and implementing state-machine-driven embedded application logic
  • Tools:Comfortable with CAN analyzer (PCAN/Vector), oscilloscope for cross-checking system behavior, JTAG/SWD debugging
  • Fundamentals:Strong C, structured design practices, and clear requirement-to-code traceability

Good-to-Have

  • Exposure to UDS/diagnostics (ISO 14229) and DTC management
  • Scripting (Python) for test automation, log parsing, or calibration tooling
  • Git, static analysis tools (Coverity/PC-lint), Jenkins/CI exposure
  • Exposure to Simulink/Embedded Coder or model-based application design
  • Prior work on chargers, inverters, or motor controllers in an EV/industrial setting

Qualification

B.E./B.Tech — Electronics, Electrical, Computer Science, Instrumentation, or related discipline

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Senior FW Engineer
Senior FW Engineer

Larsen & Toubro Limited • Coimbatore

On-site
INR 1,500,000 - 2,500,000
Embedded Hardware Design Engineer
Embedded Hardware Design Engineer

L&T Technology Services Ltd. • Bengaluru

On-site
INR 1,800,000 - 2,800,000
Senior Power Electronics Design
Senior Power Electronics Design

Larsen & Toubro Limited • Bengaluru

On-site
INR 5,000,000 - 7,500,000
Senior Power Electronics Design
Senior Power Electronics Design

Larsen & Toubro Limited • India

On-site
INR 3,500,000 - 7,500,000
PE Design Engineer-Power Converter
PE Design Engineer-Power Converter

Larsen & Toubro Limited • Bengaluru

On-site
INR 4,000,000 - 7,000,000
Sr.Control & Application SW Engineer (Power Electronics)
Sr.Control & Application SW Engineer (Power Electronics)

L&T Technology Services Ltd. • Bengaluru

On-site
INR 1,200,000 - 2,100,000
Tech Lead- Power Converter R&D
Tech Lead- Power Converter R&D

L&T Technology Services Ltd. • Bengaluru

On-site
INR 4,500,000 - 7,000,000
Firmware Dev. Engineers
Firmware Dev. Engineers

Larsen & Toubro Limited • Bengaluru

On-site
INR 1,800,000 - 2,600,000
Control & Application SW Engineer (Power Electronics)
Control & Application SW Engineer (Power Electronics)

Larsen & Toubro Limited • Bengaluru

On-site
INR 4,500,000 - 7,000,000
Specialist - Embedded Firmware
Specialist - Embedded Firmware

Eaton Corporation • Hadapsar

On-site
INR 1,500,000 - 2,500,000