Quality Inspector - CMM Programmer

Gerrell & Hard Limited

Tetford

On-site

GBP 36,000 - 48,000

Full time

3 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Gerrell & Hard Limited is seeking an experienced Quality Inspector - CMM Programmer to join our busy quality department. You will develop CMM programmes, interpret complex drawings and lead inspections to ensure parts meet strict engineering tolerances.

You will work closely with production and quality teams, perform Gauge R&R studies, and support PPAP activities while maintaining calibration records. A strong eye for detail and independent work capability are essential.

Qualifications

  • Previous experience in a CMM Programmer or similar metrology/inspection role.
  • Strong working knowledge of PC-DMIS programming.
  • Ability to interpret and understand complex engineering drawings.
  • Experience using a range of metrology and inspection equipment.
  • Good understanding of quality management systems, ideally IATF 16949 and ISO 9001.
  • Knowledge of PPAP requirements.
  • Understanding of Gauge R&R and statistical process control would be advantageous.
  • Good IT and computer skills.
  • Strong attention to detail and a methodical approach to work.
  • Excellent communication and organisational skills.
  • Ability to work independently and as part of a wider team.

Responsibilities

  • Create and develop CMM measurement programmes in line with engineering drawing specifications.
  • Set up and operate Coordinate Measuring Machines (CMM).
  • Carry out first-off, last-off, final component and assembly inspections.
  • Inspect components supplied by external subcontractors.
  • Interpret technical engineering drawings and ensure components meet required specifications.
  • Produce detailed inspection reports and documentation.
  • Raise and document non-conformances, supporting investigations and corrective actions.
  • Maintain accurate quality records in line with established quality procedures.
  • Support PPAP requirements and machine trials.
  • Assist with Gauge R&R studies and statistical data collection.
  • Maintain gauge calibration records and ensure measuring equipment remains within calibration.
  • Work closely with production and quality teams to resolve quality issues.
  • Support continuous improvement initiatives and promote a culture of quality throughout the business.
  • Ensure compliance with relevant quality management systems, including IATF 16949 and ISO 9001.

Skills

CMM Programming
Metrology
Inspection
PC-DMIS
Drawing interpretation
Quality systems ISO 9001
IATF 16949
PPAP
Gauge R&R
Data reporting
Attention to detail
Teamwork

Tools

PC-DMIS
CMM Software

Job description

We are currently recruiting for an experienced Quality Inspector - CMM Programmer to join a busy Quality Department within a manufacturing environment.This is an excellent opportunity for a technically minded individual with strong metrology and inspection experience, particularly in PC-DMIS programming.

The successful candidate will play an important role in maintaining quality standards, ensuring components meet engineering drawing specifications and supporting continuous improvement across the business.

Key Responsibilities
  • Create and develop CMM measurement programmes in line with engineering drawing specifications.
  • Set up and operate Coordinate Measuring Machines (CMM).
  • Carry out first-off, last-off, final component and assembly inspections.
  • Inspect components supplied by external subcontractors.
  • Interpret technical engineering drawings and ensure components meet required specifications.
  • Produce detailed inspection reports and documentation.
  • Raise and document non-conformances, supporting investigations and corrective actions.
  • Maintain accurate quality records in line with established quality procedures.
  • Support PPAP requirements and machine trials.
  • Assist with Gauge R&R studies and statistical data collection.
  • Maintain gauge calibration records and ensure measuring equipment remains within calibration.
  • Work closely with production and quality teams to resolve quality issues.
  • Support continuous improvement initiatives and promote a culture of quality throughout the business.
  • Ensure compliance with relevant quality management systems, including IATF 16949 and ISO 9001.
Skills & Experience Required
  • Previous experience in a CMM Programmer or similar metrology/inspection role.
  • Strong working knowledge of PC-DMIS programming.
  • Ability to interpret and understand complex engineering drawings.
  • Experience using a range of metrology and inspection equipment.
  • Good understanding of quality management systems, ideally IATF 16949 and ISO 9001.
  • Knowledge of PPAP requirements.
  • Understanding of Gauge R&R and statistical process control would be advantageous.
  • Good IT and computer skills.
  • Strong attention to detail and a methodical approach to work.
  • Excellent communication and organisational skills.
  • Ability to work independently and as part of a wider team.
What We're Looking For

We are looking for someone who takes pride in delivering high-quality work, has a proactive approach to problem-solving and can work effectively within a fast-paced manufacturing environment.

You will be confident working with technical drawings, developing CMM programmes and supporting the wider quality function to ensure products consistently meet customer requirements.

If you have strong PC-DMIS programming experience and a background in precision measurement or manufacturing quality, we'd be keen to hear from you.

LNKD1_UKTJ

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

CMM Programmer
CMM Programmer

Gerrell & Hard • Tetford

On-site
GBP 32,000 - 42,000
CMM Quality Inspector
CMM Quality Inspector

Matchtech Group • Banbury

On-site
GBP 30,000 - 47,000
CMM Quality Inspector
CMM Quality Inspector

Matchtech Group • Overthorpe

On-site
GBP 30,000 - 42,000
PC-DMIS CMM Programmer
PC-DMIS CMM Programmer

Omega • Cheltenham

On-site
GBP 35,000 - 45,000
33 days holiday (inc Bank Holidays)
Pension
Employee Health plan
+1
Cmm Programmer/ Quality Inspector
Cmm Programmer/ Quality Inspector

Staffline • Cheltenham

On-site
GBP 35,000 - 45,000
Cmm Programmer/ Quality Inspector
Cmm Programmer/ Quality Inspector

Omega Resource Group • Cheltenham

On-site
GBP 35,000 - 45,000
Competitive salary
33 days holiday
Excellent career progression
+3
CMM Operator/Programmer
CMM Operator/Programmer

Rise Search Limited • Andover

On-site
GBP 22,000 - 28,000
24 days holiday
Bank Holidays
Workplace pension
+3
Quality Inspector
Quality Inspector

Reed Specialist Recruitment • Gloucester

On-site
GBP 32,000 - 42,000
Night shift allowance
Discretionary annual bonus
25 days holiday + bank holidays
+6
CMM Technician
CMM Technician

DK Recruitment • Ilminster

On-site
GBP 32,000 - 45,000
Quality Inspector
Quality Inspector

Reed Specialist Recruitment • Painswick

On-site
GBP 28,000 - 38,000
Night shift allowance
Discretionary annual bonus
25 days holiday plus bank holidays
+2