Quality Inspector

Framatome Limited

West of England

On-site

GBP 32,000 - 46,000

Full time

14 days+

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Framatome Limited in Avonmouth is seeking a Quality Inspector to join a safety-focused nuclear team. You will perform visual and dye-penetrant inspections, ensure compliance with customer and product specifications, and support ITPs and NCR handling in a regulated environment.

The role requires 3–5 years of relevant inspection experience, CSWIP Level 2 Welding Inspection, and ISO 9712 compliance. You will work with dimensional checks and coordinate with NDT suppliers while contributing to

Qualifications

  • 3–5 years proven relevant experience as a Quality Inspector (essential).
  • CSWIP Level 2 Welding Inspection (essential).
  • PCN L2 Dye Penetrant or CSWIP equivalent, ISO 9712 compliant (essential).
  • Experience in dimensional inspection with a range of measuring equipment (essential).
  • PCN L2 Ultrasonic Testing, ISO 9712 compliant (desirable).
  • PCN L2 RT/Radiographic Interpretation (desirable).
  • Knowledge of quality tools and systems such as Six Sigma, Lean, Root Cause Analysis.
  • Experience developing and implementing processes and procedures.
  • Experience leading investigations / problem solving.

Responsibilities

  • Support the quality process to ensure high quality standards are maintained and in accordance with requirements through quality control.
  • Ensure compliance to customer and product specifications through rigorous inspections.
  • Conduct pre and in-service visual and dye-penetrant inspection of welds and raw material.
  • Conduct out of dimensional inspection including surface finish of products.
  • Carry out surveillance and inspection requirements in line with Inspection and Test Plans (ITPs).
  • Maintain Inspection Measurement & Test Equipment in acceptable working condition.
  • Coordinate and support to NDT suppliers; RT/PAUT interpretation if qualified.
  • Contribute towards continuous improvement programmes and Lessons Learned.

Skills

Attention to detail
Communication skills
Teamwork
Organised
Problem solving
Proactive

Education

CSWIP Level 2 Welding Inspection (essential)
PCN L2 Dye Penetrant (essential)
ISO 9712 compliance (essential)
PCN L2 Ultrasonic Testing (desirable)
PCN L2 RT/Radiographic Interpretation (desirable)

Tools

MS Office
Six Sigma
Lean
Root Cause Analysis

Job description

Energise Your Career with Framatome UK - Powering a Safer, Smarter Nuclear Future

Framatome is a global leader in nuclear energy, recognised for delivering innovative, value-added technologies that design, build, maintain, and advance the world’s nuclear fleet. With 23,000 employees in over 70 locations worldwide, we provide components, fuel, and control systems for nuclear power plants, along with a full suite of reactor services - all focused on improving safety, performance, and sustainability.

Backed by EDF Group (80.5%) and Mitsubishi Heavy Industries (19.5%), we’re driving the future of clean energy. Here in the UK, our team is already 400 strong - and growing. As we expand our service offerings across the UK nuclear industry, we’re aiming to continue our growth journey.

Whether you’re an experienced Welder, Fabricator, Plater, Inspector, or other skilled trades professional, you’ll have the opportunity to work on exciting projects while developing your career within a supportive and growing organisation.

We are seeking a Quality Inspector to join our team in Avonmouth.

This role will support the delivery of key projects within the nuclear sector, working in a safety-focused environment where quality, collaboration, and continuous improvement are at the heart of everything we do.

What You’ll Be Doing :
  • Support the quality process to ensure the high level of quality standards are maintained and in accordance with the relevant requirements through quality control.
  • Ensure compliance to customer and product specifications through rigorous inspections.
  • Conduct pre and in-service visual and dye-penetrant inspection of welds and raw material in accordance with applicable specifications and procedures.
  • Conduct out dimensional inspection including surface finish of products ensuring compliance to drawing requirements.
  • Conduct regular welding surveillance audits, e.g. control of WPS essential variables.
  • Conducting goods-in / out inspections on materials against specfications and project requirements.
  • Approving in-process production by confirming specifications; conducting visual and measurement tests; communicating required adjustments to Production Manager / Workshop Supervisor.
  • Carry out surveillance and inspection requirements in line with applicable Inspection and Test Plans (ITPs) including supply chain.
  • Dealing with document inspection results by completing reports and logs; summarising rework and waste.
  • Maintain Inspection Measurement & Test Equipment in acceptable working condition at the point of inspection. e.g. Calbrated/PAT tested etc.
  • Maintaining a safe and healthy work environment by following standards and procedures; complying with legal regulations.
  • Coordination and support to NDT suppliers.
  • Where qualified, RT and PAUT interpretation.
  • Quality control NCR and observation management.
  • Contribute towards business OpeEx and continuous improvement programmes. i.e. Lessons Learned, SOP improvements.
Key outputs :
  • Ensure compliance to the Quality Management Systems, policies and procedures to assure continuing compliance to ISO 9001, 19443, 14001, 45001 standards
  • The effective and accurate reporting of inspection activities.
  • The effective and accurate reporting of surveillance activities.
  • Ensure compliance to the contract quality management plans and control of Inspection and Test Plans (ITPs).
  • First line of defence - raising non-conformities / observations.
  • Ensure traceability of raw material is maintained throughout manufacturing process.
What are we looking for?
  • 3-5 years proven relevant experience as a Quality Inspector (essential).
  • CSWIP Level 2 (3.1) Welding Inspection (essential).
  • PCN L2 Dye Pen or CSWIP equivalent, must be ISO 9712 compliant (essential).
  • Experience in dimensional inspection having used a range of measuring equipment (essential).
  • PCN L2 Ultrasonic Testing, must be ISO 9712 compliant (desirable).
  • PCN L2 RT/Radiographic Interpretation (desirable).
  • Knowledge of Quality tools and systems e.g. Six Sigma, Lean, Root Cause Analysis.
  • Experience of developing and implementing processes and procedures.
  • Experience leading investigations / problem solving.
  • High level of competence in MS Office products.
  • Sound fabrication and welding knowledge.
  • Knowledge of ISO 9001, 14001 and 45001.
  • Questioning attitude.
  • Demonstrates strong teamwork skills while requiring minimal supervision.
  • Organised individual with high attention to detail.
  • Good communication and interpersonal skills including influencing and presenting.
  • Ability to take responsibility and accountability for problems within their own remit and to deliver solutions.
  • Results focused with the ability to meet commitments and deadlines.
  • Discretion, ability to maintain confidentiality.
Training :
  • Pressure Water Reactor (PWR) knowledge and experience.
  • Nuclear Safety & CFSI Awareness.
  • Human Perfomance and Tools.
  • Up-keep of current and new inspection qualifications.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Lead Quality Inspector
Lead Quality Inspector

Framatome • West of England

On-site
GBP 40,000 - 60,000
Nuclear training
25 days annual leave
8% pension contribution
+3
Quality Inspection Superintendent
Quality Inspection Superintendent

Framatome Limited • Bridgwater

On-site
GBP 68,000 - 80,000
25 days annual leave
8% employer pension
Employee assistance programme (EAP)
Quality Inspector
Quality Inspector

Framatome • West of England

Hybrid
GBP 32,000 - 46,000
25 days annual leave
Private health care
Pension scheme
+1
Lead Welder
Lead Welder

Framatome Limited • West of England

On-site
GBP 19,000 - 25,000
Q1 - Surveillance & Inspection
Q1 - Surveillance & Inspection

Framatome • Bridgwater

On-site
GBP 42,000 - 56,000
25 days annual leave
8% pension contribution
Employee assistance programme
+1
Quality Control Inspector
Quality Control Inspector

Matchtech • West of England

On-site
GBP 42,000 - 54,000
Q1 - Surveillance & Inspection (2026-28230)
Q1 - Surveillance & Inspection (2026-28230)

Framatome • Bridgwater

On-site
GBP 68,000 - 80,000
Quality Engineer (2026-28075)
Quality Engineer (2026-28075)

Framatome • Bridgwater

On-site
GBP 53,000 - 73,000
Project Quality Manager - Nuclear in Bristol, United Kingdom
Project Quality Manager - Nuclear in Bristol, United Kingdom

Energy Jobline ATTB • West of England

On-site
GBP 75,000 - 80,000
Quality Control Inspector - Deeside
Quality Control Inspector - Deeside

Matchtech Group • Wales

On-site
GBP 40,000 - 55,000