PhD in 3D Printing Mechanically Adaptive Regenerative Interfaces for Improved Bone Screw Fixation

University of Exeter

Penryn

On-site

GBP 20,000 - 24,000

Full time

14 days+

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

The University of Exeter at Penryn Campus invites applications for a PhD studentship focused on bioresorbable, regenerative scaffolds that engineer the screw–bone interface to enhance fixation and osseointegration. You will work within a cross‑disciplinary team spanning biomaterials, tissue engineering, additive manufacturing, and pre‑clinical evaluation using Exeter’s six‑axis bioreactor.

The project emphasises scaffold architecture, material composition, and physiological loading to mimic

Job description

Low back pain is the leading cause of disability worldwide, and presents a significant socioeconomic burden from direct treatment costs, and indirect costs due to losses in productivity. An ageing population, combined with increases in inactivity and obesity is expected to further increase this burden. Low back pain is initially treated conservatively, but approximately 20% of patients will require surgery. However, spinal surgery is expensive, clinical outcomes are relatively poor, and reoperation rates are relatively high (~20% within 10 years). Spinal surgery often uses pedicle screws and rods to provide stabilisation.

However, screw loosening and pull-out are major complications, particularly in patients with poor bone quality (e.g., osteoporosis), which can result in pain and instability, ultimately requiring expensive revision surgery. The design of screws has been adapted to mitigate loosening, including larger or longer screws, altered thread geometry, expandable screws, and bone cement augmentation. Non-biodegradable sleeves (e.g. Ogmend) have been used to distribute screw loading to increase pull-out force. However, clinical evidence of these mitigation strategies is inconsistent, or limited, and many devices are evaluated pre-clinically using insertion torque, uniaxial pull-out tests, or simplified cyclic loading, which do not replicate the complex multi-axis loading experienced in vivo. Furthermore, they do not actively regenerate the screw–bone interface or progressively transfer load to newly formed bone.

The aim of this project is to develop a new generation of bioresorbable, regenerative scaffolds that engineer the screw-bone interface to improve primary and secondary fixation. By controlling scaffold architecture, mechanical properties, bioactivity and degradation, the scaffold will enhance immediate fixation whilst promoting osseointegration and progressive load transfer to newly formed bone. The project will combine biomaterials and tissue engineering with advanced pre-clinical evaluation using Exeter’s six-axis bioreactor. COSA Ltd will provide expertise in medical imaging, anatomical modelling, and multi-material 3D printing to develop reproducible bone-mimicking models for in vitro mechanical testing, whilst clinical guidance will help ensure that scaffold development is aligned with surgical practice.

The project will:

  1. Develop and evaluate functionally graded and anisotropic scaffold architectures using additive manufacturing that are designed to distribute interfacial stresses, reduce damaging micromotion, and improve resistance to screw loosening and pull-out.
  2. Engineer material compositions to promote bone formation and tissue integration. Bioactive and mechanically responsive material strategies will also be explored to determine whether physiological loading can be harnessed to stimulate regeneration at the screw–bone interface (e.g., piezoelectric biomaterials).
  3. Integrate scaffold development with physiologically relevant six-axis mechanical bioreactor testing. Candidate designs will be evaluated under complex loading that better reflects activities of daily living than conventional tests. This will reveal how scaffold architecture influences load transfer, micromotion, and biological response, directly informing iterative design and optimisation.

The project will therefore establish a design–manufacture–test process for engineering mechanically adaptive screw–bone interfaces. Although pedicle screw fixation will provide the primary clinical application, the underlying principles could ultimately be translated to other orthopaedic fixation devices where poor bone quality and implant loosening remain major challenges. In order to achieve these goals, the project will be supported by an interdisciplinary supervisory team consisting of academics, clinicians, and industry with expertise in biomaterials, tissue engineering, additive manufacturing, and mechanobiology.

Location

University of Exeter, Penryn Campus

£21,805. The studentship will provide funding of fees and a stipend per annum for 2026/7

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

PhD Studentship: Engineering Ceramic Powder Feedstocks for Additive Manufacturing of Components for Extreme Environments
PhD Studentship: Engineering Ceramic Powder Feedstocks for Additive Manufacturing of Components for Extreme Environments

University of Exeter • Exeter

On-site
GBP 20,000 - 24,000
PhD stipend
Fees funding
PhD: 3D-Printed Regenerative Screw–Bone Interfaces
PhD: 3D-Printed Regenerative Screw–Bone Interfaces

University of Exeter • Penryn

On-site
GBP 20,000 - 24,000
PhD Studentship: Regenerative Scaffolds for Spine Fixation
PhD Studentship: Regenerative Scaffolds for Spine Fixation

University of Exeter • Exeter

On-site
GBP 20,000 - 24,000
PhD stipend
Fees funding
Optimisation of Functional Surfaces to Improve Localised Bone Interaction in Novel Polymeric Total Knee Replacement
Optimisation of Functional Surfaces to Improve Localised Bone Interaction in Novel Polymeric Total Knee Replacement

University of Huddersfield • Huddersfield

On-site
GBP 21,000 - 32,000
PhD Studentship: Bioresorbable intestinal devices with embedded resorbable sensors for gastrointestinal monitoring
PhD Studentship: Bioresorbable intestinal devices with embedded resorbable sensors for gastrointestinal monitoring

University of Birmingham • Birmingham

On-site
GBP 20,000 - 24,000
Tuition fees paid
UK stipend
Travel funds for conferences
Engineered Surfaces for Bone-Ready Polymeric Knee Implants
Engineered Surfaces for Bone-Ready Polymeric Knee Implants

University of Huddersfield • Huddersfield

On-site
GBP 21,000 - 32,000
Postdoctoral Research Scientist – Biomaterials and Biofabrication
Postdoctoral Research Scientist – Biomaterials and Biofabrication

University of Oxford • Oxford

On-site
GBP 35,000 - 42,000
Pension scheme
38 days annual leave
Childcare services
+4
PhD Studentship: Can a picture predict strength? Learning how collagen architecture sets the mechanics of living tissue.
PhD Studentship: Can a picture predict strength? Learning how collagen architecture sets the mechanics of living tissue.

University of Plymouth • Devon and Torbay

On-site
GBP 18,000 - 21,000
4-year studentship
Tuition fees covered
UKRI stipend
Postdoctoral Research Scientist – Biomaterials and Biofabrication
Postdoctoral Research Scientist – Biomaterials and Biofabrication

RFCSR • Oxford

On-site
GBP 39,000 - 47,000
PhD Studentship: Actuated microdevices for oral delivery of biologics
PhD Studentship: Actuated microdevices for oral delivery of biologics

University of Birmingham • Birmingham

On-site
GBP 20,000 - 24,000
Fully funded EPSRC studentship