Mechanical Simulation Engineering Graduate

Monash University; Brixworth; On-site; GBP 33,000 - 38,000; Full time

Benefits offered by this job

36 days annual leave

Onsite Gym

Company lease car scheme

Collective bonus

Generous pension scheme

Staff discounts

Job summary

Mercedes AMG HPP is seeking a Mechanical Simulation Engineering Graduate in our Northamptonshire Tech Centre. You will learn to become a multi-skilled simulation engineer through hands-on projects across engine, powertrain and related subsystems.

You will conduct static and dynamic analyses, use FEA/MBD/CFD tools, and tackle complex problems to support design decisions. The programme combines training with real project deliveries and exposure to industry-leading practices.

Qualifications

• Degree qualified (2:1 minimum) in Mechanical Engineering / Automotive / Aerospace or similar.
• Strong A-Levels in Maths & Physics.
• Experience with FEA/MBD/CFD tools and simulation workflows.
• Ability to handle multi-disciplinary simulations and deliver insights.

Responsibilities

• Conduct simulations on components, assemblies and systems (thermal/mechanical/fatigue).
• Deliver static and dynamic analyses and validate results.
• Work across FEA, MBD and CFD to solve complex problems.
• Develop simulation processes balancing speed and accuracy.
• Communicate technical solutions to stakeholders and produce reports.

Skills

FEA

MBD

CFD

Abaqus

Hypermesh

Education

2:1 degree in Mechanical Engineering or similar

Tools

Abaqus/CAE

Hypermesh

SimLab

Dymola

AVL Excite

Star CCM+

Job description

Mechanical Simulation Engineering Graduate

Job no: 498306
Work type: Student
Location: Brixworth
Categories:

The purpose of this Graduate scheme is to…

• Become a multi-skilled Mechanical Simulation Engineer by the end of the programme.
• Conduct simulations on components, assemblies and/or systems.
• Possess a good theoretical and practical knowledge of mechanical systems and their functionality.
• Deliver static and dynamic analysis of components, assemblies and systems (thermal/mechanical/fatigue analyses)
• Undertake simulation work for the most complex and challenging of problems within the F1 product engineering group
• Ensure that the designs released by the product engineering group are right first time whilst meeting the often competing targets of performance, reliability, time, mass and cost.

Therefore, we are looking for candidates who...

Are skilled at:

• Hand calculations and complex simulations
• In general, we require multi-skilled simulation engineers, with experience of FEA, MBD and CFD. The target of our simulation engineers is to have, at least, expert knowledge and experience in one of these simulation types, very good knowledge and experience of another and some knowledge and experience of the third.
• If you have some knowledge in one of these fields we may offer, to a candidate with the right aptitude and attitude, to train you to become skilled in one or both of the other fields.
• Some experience in all or some of the following disciplines; Finite Element Analysis (FEA), Multi-Body Dynamics (MBD), Computational Fluid Dynamics (CFD).

Have experience of:

• Working with internal combustion engines / rotating machinery and their sub-systems, including mechanical and thermal loading.
• Operating in a demanding environment, demonstrating the use of analytical tools to complement and enhance the design of complex, highly loaded components/systems.
• Simulating and analysing components and assemblies using finite element analysis. Have some knowledge and experience of analysing thermal, mechanical and fatigue loadings. Very desirable to have knowledge of analysing FEA problems using Abaqus and Abaqus/CAE software (meshing using Hypermesh or SimLab would also be useful) and analysing fatigue using FE-Safe software.
• Simulating and analysing multi-body dynamics problems of mechanical systems, preferably with experience of engine, powertrain and electric motors. Very desirable to have knowledge of analysing MBD problems using Dymola and/or AVL Excite software
• Simulating and analysing fluid flow problems using computational fluid dynamics. Knowledge and experience of simulating cooling, lubrication and fuel system components would be desirable. Experience of using Star CCM+ would be preferable.

Demonstrate knowledge of:

• For FEA must be able to demonstrate some knowledge of comprehending mechanical systems, geometry preparation for FEA, meshing techniques, understanding and applying material properties, applying loads, evaluating the consequence of constraints and boundary conditions and making good choices, setting up complex contact interactions. Diagnosing, optimising and fixing solving issues. Setting up and understanding static, dynamic, thermal, linear perturbation, visco and fatigue analysis. Performing fatigue analysis, including duty-cycles, load histories, high-cycle and low-cycle fatigue. Interpreting results and recommending realistic improvements.
• For MBD must be able to demonstrate some knowledge of comprehending mechanical systems, vibration theory, natural frequencies, mode shapes, excitation forces, forced response, resonance, Fourier series/order analysis, and influences of mass/inertia, stiffness, lash/clearances and damping.
• For CFD must be able to demonstrate some knowledge of comprehending realistic fluid systems, fluid dynamics theory, turbulence models, boundary layer models, fluid properties, mesh generation and optimisation, single-phase and two-phase flow problems, conjugate heat transfer and the dynamic effects of velocity and pressure.
• Reasonable understanding of materials and their properties

Hold these qualifications:

• Degree qualified (2:1 minimum) in an appropriate engineering discipline (Mechanical Engineering / Automotive / Aerospace or similar)
• Strong A-Levels in Maths & Physics

Are:

• Rigorous
• Curious
• Creative
• Focused

Success in this role will be if you… (deliverables)

• Practically use analysis to reduce lead times for fully engineered solutions and increase the quality of them, allowing us to bring enhanced performance and reliability to the circuit, quickly.
• Deliver world class simulation driven solutions, supported by first principles engineering to meet demanding project targets.
• Creating and developing simulation processes that strike a good balance between speed and accuracy. This may also involve creating and developing multiple models, for a particular problem, that range from simple/quick to complex/accurate, which are selected to match the available timeframe or design stage.
• Ensure simulations correlate well with empirical data and measured power unit data.
• Technically develop and improve our processes.
• Champion best practice and provide support and training to peers.
• Communicate technical solutions to a variety of stakeholders, including the writing of technical reports.

What can we offer you?

Our benefits package includes:

• A salary of £33,000pa
• Collective bonus
• Company lease car scheme
• 36 days annual leave
• Access to a generous pension scheme
• Onsite Gym
• A variety of other benefits and staff discounts

The Process:

We recognise that the ideal candidate for this role may not meet every requirement in this advert and understand that some applicants are less likely to apply to jobs unless they meet every single qualification. Here at Mercedes AMG HPP our people are our strength and the diverse talents they bring are critical to our success. HPP does not discriminate on the basis of race, colour, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, veteran status, marital status or group or class protected by any local law and we encourage applications from any background.

During your application process we are committed to providing additional support where it may be needed. If you need additional financial support to help attend Assessment Centres and Interviews you can apply to be considered to receive our Interview Travel Bursary which will provide full reimbursement for any travel expenses incurred. At the point of a successful invitation to interview please raise this with your Recruitment contact at HPP.

Please note, due to the volume of applications we receive, there may be periods of time during the process where you don't hear anything from us. Don't worry! We will advise you of the outcome of your application regardless of the result so please bear with us. Please be advised that we are unable to provide detailed feedback to applicants, apologies for any inconvenience.

Advertised: 01 Sep 2026 GMT Daylight Time
Applications close: 30 Oct 2026 GMT Standard Time

In August we will open our application window for our next intake of Early Careers vacancies! We have over 50 opportunities available, across all disciplines, for exceptional students to join our Eight-time World Championship winning team at our state-of-the-art Technology Centre in Northamptonshire.

Want to find out more about what our F1 Trackside Team do here at HPP, view the video below from Barney our Head of Product Validation to get an in-depth insight into the world of the F1 Engineering.

HPP team members and their partners gathered for an evening of appreciation and connection at Rushton Hall for our Long Service Celebration.