Characterization and packaging of millimeter-wave devices (M/F)

CNRS - National Center for Scientific Research

France

Presencial

EUR 20.000 - 28.000

A tiempo parcial

14 días+

Consigue una respuesta de este empleador

Tu currículum y tu carta de presentación, adaptados exactamente a lo que buscan contratar.

Supera los filtros ATS

Descripción de la vacante

The PhD student will join CNRS - Institut d'Electronique de Microélectronique et de Nanotechnologie to work on packaging and characterization for millimeter-wave devices in the Renapack project. The position involves testing photodiodes, integrating them with active structures, and developing measurement benches for high-frequency surfaces.

You will contribute to validating packaging concepts for D-band applications (110-170 GHz), performing single-frequency characterization, and participating

Formación

  • PhD candidate in Electrical Engineering or related field.
  • Experience with millimeter-wave packaging and characterization is preferred.
  • Knowledge of high-frequency measurement techniques and test benches.

Responsabilidades

  • Characterize substrates for device fabrication using free-space or VNA techniques.
  • Develop packaging in a guiding structure for millimeter-wave signal extraction and glass packaging.
  • Test D-band integration, including photodiodes with active structures up to 300 GHz.
  • Develop single-frequency characterization techniques for D-band surfaces.
  • Perform system-level tests on D-band surfaces, including EVM, BER, and SNR metrics.
  • Contribute to measurement benches and interconnection testing within the project.

Conocimientos

Substrate characterization
Packaging techniques
D-band testing
Photodiode integration
System-level testing

Educación

PhD candidate in Electrical Engineering

Herramientas

VNA measurements
Free-space techniques

Descripción del empleo

Organisation/Company CNRS Department Institut d'Electronique de Microélectronique et de Nanotechnologie Research Field Mathematics History » History of science Researcher Profile First Stage Researcher (R1) Application Deadline 23 Nov 2026 - 23:59 (UTC) Country France Type of Contract Temporary Job Status Full-time Hours Per Week 35 Offer Starting Date 4 Jan 2027 Is the job funded through the EU Research Framework Programme? Not funded by a EU programme Is the Job related to staff position within a Research Infrastructure? No

Offer Description

The PEPR Packaging PACTERA project focuses specifically (packaging chair) on validating the packaging concepts and building blocks developed within the project. The aim is to develop packaging dedicated to individual component supply chains (Renatech) that still need to reach Technology Readiness Levels (TRL) before being used in demonstrators. IEMN has implemented all the high-frequency characterization tools necessary to evaluate the performance of the building blocks and associated subsystems for communications within the targeted frequency range.

  • - Characterize the substrates on which the devices will be fabricated (using TDS free-space techniques or VNA techniques on propagation structures (e.g., lines, which will be defined by our colleagues at the CEA)).
  • - Develop packaging in a guiding structure for millimeter-wave signal extraction, and/or on glass for photodiode-based components. This is necessary to consider functionalizing the devices (packaging the devices on glass), ultimately allowing their integration into configurable devices. For this work, the D-band is the target, and the signal transfer techniques will be carried out within the Renapack network. Furthermore, we aim to test the association of photodiodes with active structures using ultrashort "wedge bond" type bonding, which will also be individually evaluated and tested at the IEMN up to 300 GHz. The expertise will be developed within the Renapack network under the PEPR Initiative Packaging. in order to open it up to communities.
  • - To develop single-frequency characterization techniques for D-band (110-170 GHz) surfaces in order to extract performance indicators (bandwidth, radiation, angular behavior, etc.).

- To measure the radiation of the first prototypes (around 140 GHz) of reconfigurable EM surfaces developed at CEA-LETI, jointly designed by IETR, XLIM, and UGA.

- To develop their characterization in the D-band as well, based on D-band channels, using different modulation formats (from QPSK to QAM-128). The specific characteristics of D-band channels necessitate specific developments for narrow spectral bandwidths (2.16 GHz) compared to current standards.

- To perform system-level tests on these surfaces in D-band to validate the surfaces manufactured by the consortium, in two areas:

  • o Generic tests at the physical layer level, i.e., at the modulation level, using appropriate metrics: Error Vector Magnitude (EVM), bit error rate (BER), and Signal-to-Noise Ratio (SNR).
  • o Network-layer tests: in this case, IP (Internet Protocol) frames will be directly encoded in D-band and adjusted to test the device.

The PhD student will primarily participate in the packaging of the photodiodes in direct partnership with the PACTERA consortium, interconnection testing, component modeling, and the setup of measurement benches specific to the project (system characterization component).

Contributions to characterization and packaging at millimeter frequencies

Consigue la evaluación confidencial y gratuita de tu currículum.

o arrastra y suelta tu archivo aquí

Similar jobs

Puestos de trabajo similares que vale la pena comparar

Millimeter-Wave Packaging & Characterization Engineer
Millimeter-Wave Packaging & Characterization Engineer

CNRS - National Center for Scientific Research • Francia

Presencial
EUR 20.000 - 28.000
Fixed-term researcher position (M/F) – IEMN-Lab-STICC
Fixed-term researcher position (M/F) – IEMN-Lab-STICC

Unist • Villeneuve-d'Ascq

A distancia
EUR 30.000 - 42.000
Stage ingénieur : mmW IC Designer Conception d'un amplificateur de puissance RF pour radar automobile évolutif (F/H)
Stage ingénieur : mmW IC Designer Conception d'un amplificateur de puissance RF pour radar automobile évolutif (F/H)

NXP Semiconductors • Grenoble

Presencial
EUR 12.000 - 19.000
RF/mmWave project
Mentoring technique
Advanced design methods
+1
Stage - Caractérisation de circuits photoniques pour le couplage de µLED dans le visible H/F
Stage - Caractérisation de circuits photoniques pour le couplage de µLED dans le visible H/F

CEA • Grenoble

Presencial
EUR 7800 - 10.000
Développement d’un montage pompe-sonde dégénéré dans l’infrarouge moyen (H/F)
Développement d’un montage pompe-sonde dégénéré dans l’infrarouge moyen (H/F)

Cnrs Inc • Palaiseau

Presencial
EUR 40.000 - 54.000
Panel-Level Packaging: Interface Characterization
Panel-Level Packaging: Interface Characterization

STMicroelectronics • Arrondissement de Tours

Presencial
EUR 20.000 - 28.000
Stage ingénieur : mmW IC Designer Conception d'un amplificateur de puissance RF pour radar automobile évolutif (F/H)
Stage ingénieur : mmW IC Designer Conception d'un amplificateur de puissance RF pour radar automobile évolutif (F/H)

NXP Semiconductors • Grenoble

Presencial
EUR 10.000 - 16.000
Mentorat technique
Projet RF/mmWave concret
Environnement international
Capteurs résonnants télé-alimentés pour environnements sévères H/F
Capteurs résonnants télé-alimentés pour environnements sévères H/F

CEA • Grenoble

Presencial
EUR 10.000 - 17.000
Stage - Développement expérimental de communication rapide à base de µLED RF H/F
Stage - Développement expérimental de communication rapide à base de µLED RF H/F

CEA • Grenoble

Presencial
EUR 6700 - 13.000
Restauration prise en charge
Transport pris en charge
Logement pris en charge
IPVF – STAGE – Device Optimization through Advanced Characterization of Perovskite Solar Cells and Modelling H/F
IPVF – STAGE – Device Optimization through Advanced Characterization of Perovskite Solar Cells and Modelling H/F

Institut Photovoltaique d'Ile-de-France • Palaiseau

Presencial
EUR 12.000 - 19.000
IPVF internship agreement