Senior Embedded (ARM) Engineer - Quantum Computing (m/w/d)

eleQtron GmbH; Wilhelmshausen; Vor Ort; EUR 80.000 - 110.000; Vollzeit

Benefits dieser Stelle

Competitive salary

Flexible working hours

Team events

Development opportunities

Wellness benefits

Bike leasing

Moving benefits

Zusammenfassung

eleQtron GmbH is seeking a Senior Embedded (ARM) Engineer to own real-time firmware for our control electronics, integrating into a quantum computer. You will work at the heart of the machine, ensuring nanosecond-precise signal delivery and deterministic performance across the ARM-based platform.

You will lead firmware bring-up, develop low-level drivers, and coordinate with electronics and physics teams to turn requirements into robust, testable code. Hamburg or Siegen, on-site roles.

Qualifikationen

• 5+ years of professional embedded software development for real-time or timing-critical systems
• Deep command of C (and ideally C++) on ARM platforms, working close to the hardware
• Experience with bare-metal and/or RTOS environments, and a clear understanding of when each is appropriate
• Comfortable reading schematics and datasheets, and debugging real hardware with oscilloscopes, logic analysers, and JTAG
• Strong grasp of real-time concepts: interrupts, DMA, timing, concurrency, and determinism
• A track record of bringing up firmware on new hardware, not only maintaining existing systems
• Ability to collaborate effectively with experimental physicists and engineers, and to turn imprecise physical requirements into robust firmware
• Strong adaptability and a quick learning mindset
• Good proficiency in English (written and spoken)
• Nice to have: ARM+FPGA platforms (Xilinx Zynq/RFSoC), Rust for embedded, Embedded Linux on ARM, etc.

Aufgaben

• Own the embedded firmware on our ARM-based control platform, from architecture through implementation to on-hardware debugging
• Develop and maintain the real-time software layer that coordinates pulse sequencing, timing, and data flow across our highly integrated control chip
• Write and maintain the low-level drivers and board support the hardware relies on
• Guarantee deterministic, low-latency behaviour under hard real-time constraints
• Lead firmware bring-up together with electronics and physics teams, and debug at the software-hardware boundary
• Define the firmware architecture and engineering practices - build, test, and release processes for the embedded layer
• Contribute to interfaces between embedded layer and the rest of the stack so experiments defined in software run correctly on the machine

Kenntnisse

Embedded real-time development

C/C++ on ARM

RTOS vs bare-metal

Reading schematics/datasheets

Oscilloscopes/JTAG debugging

Deterministic timing

Firmware bring-up

English communication

Tools

ARM architecture

Bare-metal development

RTOS environments

JTAG debugging

Jobbeschreibung

eleQtron develops and operates full-stack quantum computers based on trapped-ion technology. Quantum computing is a new computing paradigm rapidly approaching commercial viability. Our unique approach combines laser-cooled trapped ions with microwave control and tailored magnetic fields. Our next-generation computing machines under development will be able to find solutions to problems that are out of reach today, thus enabling new innovative products and services for a brighter future.

We are looking for a Senior Embedded (ARM) Engineer (m/f/d) to join us in Hamburg or Siegen and own the real-time firmware that turns our control electronics into a working quantum computer. You will work on our next-generation system, where the control electronics are being integrated into a single, highly integrated chip. You sit at the heart of the machine, between the hardware that generates the pulses and the higher-level software that describes the experiments. Timing is not a detail here; it is the product. You are the person who makes sure the right signal reaches the ions at the right nanosecond, reliably, run after run.

Responsibilities:

• Own the embedded firmware on our ARM-based control platform, from architecture through implementation to on-hardware debugging
• Develop and maintain the real-time software layer that coordinates pulse sequencing, timing, and data flow across our highly integrated control chip
• Write and maintain the low-level drivers and board support the hardware relies on
• Guarantee deterministic, low-latency behaviour under hard real-time constraints
• Lead firmware bring-up together with our electronics and physics teams, and debug at the boundary where software meets signal
• Define the firmware architecture and engineering practices - build, test, and release processes for the embedded layer as the system matures
• Contribute to the interfaces between the embedded layer and the rest of the stack, so experiments defined in software run correctly on the machine

Required Skills:

• 5+ years of professional embedded software development for real-time or timing-critical systems
• Deep command of C (and ideally C++) on ARM platforms, working close to the hardware
• Experience with bare-metal and/or RTOS environments, and a clear understanding of when each is appropriate
• Comfortable reading schematics and datasheets, and debugging real hardware with oscilloscopes, logic analysers, and JTAG
• Strong grasp of real-time concepts: interrupts, DMA, timing, concurrency, and determinism
• A track record of bringing up firmware on new hardware, not only maintaining existing systems
• Ability to collaborate effectively with experimental physicists and engineers, and to turn imprecise physical requirements into robust firmware
• Strong adaptability and a quick learning mindset
• Good proficiency in English (written and spoken)
  

Nice to have (Bonus)

• Experience on highly integrated SoCs, particularly ARM+FPGA platforms such as Xilinx Zynq / RFSoC
• Working alongside FPGA/digital-electronics engineers at the software-gateware boundary
• Rust for embedded systems
• Embedded Linux on ARM (Cortex-A), including driver and kernel-module work
• Signal processing or control-loop implementation on embedded targets
• Experience with high-speed data acquisition or precision timing systems
• Familiarity with laboratory, scientific, or measurement instrumentation
• Prior experience with quantum computing or other deep-tech domains

What you can expect from eleQtron:

• Competitive salary: We value our team members and therefore provide remunerations that reflect this, additionally rewarding achievements

• Flexible working hours: We offer personal freedom through a variety of flexible work schedules

• Team spirit: In our international and diverse team, and with our regular team events, having fun at work is simply part of the culture

• Further development: We want to grow together and so we offer our team members needs-based, individualized further training as well as plenty of room for personal development

• Wellness Package: We offer health-promoting benefits such as fitness programs like UrbanSportsClub to support your well-being

• Bike Leasing: Stay Mobile and Sustainable with Our Company Bike Leasing Program

• Moving Benefits: A warm welcome! We are happy to support employees who move for us with a bonus

• At the forefront: Work at the forefront of technology, where academic research meets commercial applications

• Modern workplace: We have a high-quality infrastructure with laboratory space, offices and meeting rooms