Sr Electronics&Safety Engineer, RIVR

Amazon Inc.; Zürich; On-site; CHF 120,000 - 180,000; Full time

Job summary

RIVR, an Amazon company, seeks a Senior Electronics Engineer – Functional Safety to own hardware-level safety design for custom electronics in delivery robots. You will design fault-tolerant circuits, implement diagnostics, and perform FMEDA to substantiate SIL targets.

This hands-on role requires cross-functional collaboration with firmware, mechanics, and systems teams. The ideal candidate has a master’s in Electrical Engineering with 5+ years in functional safety hardware, proven SIL2/3

Qualifications

• 5+ years designing electronics hardware for Functional Safety–certified products.
• Proven work under IEC 61508, ISO 13849, or ISO 26262.
• PCB-level hardware delivering SIL 2/3 (or equivalent PL d/e).
• Background in analog, power, and/or mixed-signal design.
• Hands‑on experience implementing safety architectures in schematics.

Responsibilities

• Design fault-tolerant circuits for safety-critical subsystems with appropriate SIL targets.
• Implement hardware diagnostics and monitoring to detect dangerous failures.
• Enforce defined safe state on fault detection and apply Common-Cause Failure mitigation.
• Perform FMEDA and compute SIL metrics to verify designs meet targets.
• Advise system architects on hardware safety constraints and review PCB layouts.
• Collaborate with electronics, firmware, and systems teams to integrate safety features.

Skills

SIL design

Hardware safety engineering

Analog design

FMEDA

Functional Safety standards

PCB safety/layout

Cross-functional collaboration

Education

Master's degree in Electrical Engineering

Tools

SPICE

ECAD tools

Reliability analysis tools

Job description

Description

RIVR, an Amazon company, is building Physical AI by deploying autonomous robots for real-world doorstep delivery. Operating daily in diverse urban environments, RIVR's robots continuously learn from and navigate the millions of scenarios encountered during deliveries. By owning the full stack from software to hardware, RIVR is purpose-built for safety, reliability, and the customer from day one.

As a Senior Electronics Engineer – Functional Safety, you will own the hardware-level Functional Safety design for our robots’ custom electronics. You will design fault-tolerant circuits at the schematic and PCB level — implementing redundant architectures, hardware diagnostics, and safe-state mechanisms — and perform the quantitative reliability analysis to substantiate that your designs meet the required Safety Integrity Level. This is a hands-on circuit design role, not a systems-level safety concept or process management position.

Key job responsibilities

• Design fault-tolerant circuits for safety-critical subsystems, selecting appropriate safety architectures (e.g., 1oo2, 1oo2D) based on the required SIL target.
• Implement hardware diagnostic and monitoring mechanisms to detect dangerous failures.
• Design circuits that enforce a defined safe state when a fault is detected.
• Apply Common-Cause Failure mitigation techniques at the component and PCB level.
• Perform FMEDA on your own schematics — identifying failure modes per component and calculating Safe Failure Fraction (SFF) and Diagnostic Coverage (DC).
• Build Reliability Block Diagrams and compute SIL metrics to verify your designs meet the target.
• Select and derate components based on failure rate data, mission profiles, and expected lifetime.
• Advise system architects on hardware safety constraints and review PCB layouts for safety compliance.
• Collaborate with electronics, firmware, and systems engineering teams to integrate safety functions into the overall robot design.
• Create and maintain Functional Safety documentation for your hardware modules.

Basic Qualifications

• 5+ years designing electronics hardware for Functional Safety–certified products.
• Proven work under IEC 61508 (preferred), ISO 13849, or ISO 26262.
• Delivered PCB-level hardware that achieved SIL 2 or SIL 3 (or equivalent PL d/e, ASIL B–D) certification.
• Background in analog, power, and/or mixed-signal circuit design.
• Hands‑on experience implementing safety architectures in schematics — not just block diagrams.
• Ability to perform FMEDA and SIL metrics calculations on your own designs.
• Understanding of failure rate data sources and component derating for reliability.
• Strong problem‑solving skills and ability to debug fault‑tolerant hardware.
• Comfortable working cross‑functionally with firmware, mechanical, and systems teams.
• Master’s degree or higher in Electrical Engineering, Electronics, or a closely related field.

Preferred Qualifications

• Experience with safety‑rated ICs (safe supply supervisors, safety MCUs, smart drivers with diagnostic feedback).
• Has contributed to or authored a Safety Manual for a hardware module.
• Familiar with Proven‑in‑Use argumentation for off‑the‑shelf components.
• PCB layout skills relevant to safety (creepage/clearance, redundant channel routing).
• Experience with circuit simulation (SPICE) to verify fault response behaviour.
• Experience in robotics, automotive, aerospace, or medical device sectors.

Amazon is an equal opportunities employer.

We believe passionately that employing a diverse workforce is central to our success.

We make recruiting decisions based on your experience and skills.

Please consult our Privacy Notice ( https://www.amazon.jobs/en/privacy_page ) to know more about how we collect, use and transfer the personal data of our candidates.

Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.