Technicien en Automation - département de service - Automation Technician

Excelpro

Trois-Rivières

On-site

CAD 70,000 - 100,000

Full time

14 days+

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Excelpro à Trois-Rivières recherche un Technicien(ne) en Automation chargé de réaliser des projets d’automatisation, programmer PLC et interfaces opérateurs, et assurer la mise en service chez les clients.

Le candidat doit posséder un DEC ou équivalent en électricité/automation, 3 à 5 ans d’expérience, et être bilingue FR/EN; déplacements fréquents chez les clients sont prévus.

Qualifications

  • Détention d’un diplôme collégial en génie électrique ou équivalent.
  • 3 à 5 ans d’expérience dans un poste similaire.
  • Programmation de PLCs et d’interfaces opérateurs.
  • Réseautique industrielle.
  • Maîtrise du français et de l’anglais, parlé et écrit.
  • Permis de conduire valide.
  • Disponibilité pour déplacements chez les clients.
  • Connaissance Siemens et ASP Construction.

Responsibilities

  • Participer à l’exécution de projets d’automatisation.
  • Concevoir des systèmes automatisés.
  • Programmer PLCs et interfaces opérateurs.
  • Effectuer la mise en service chez les clients et dépanner.
  • Répondre aux appels de service et effectuer réglages.
  • Réaliser les rapports techniques et pré-opérationnels.
  • Assurer le respect des consignes santé et sécurité.
  • Établir diagnostics et améliorer les systèmes.

Skills

Programmation PLCs
Interfaces opérateurs (HMI)
Réseautique industrielle
Bilingue FR/EN
Esprit analytique
Travail en équipe

Education

Diplôme d’études collégiales en génie électrique
ACS en automatisation industrielle

Tools

Siemens programmation
ASP Construction

Job description

En Tant Que Technicien Ou Technicienne En Automation, Vous Aurez Comme Mandat Principal De Réaliser Différents Projets D’automation Et De Résoudre Des Problèmes Qui Nuisent Aux Opérations Chez Nos Clients. Plus Précisément, Vous Aurez à

  • Participer à la réalisation de différents projets d’automatisation;
  • Participer à la conception des systèmes automatisés;
  • Programmer tous les types d’automates programmables pour différents types de produits, ainsi que les interfaces opérateurs (visuel);
  • Effectuer la mise en service des systèmes programmés chez les clients : validation de la programmation si conforme aux demandes du client, dépannage, modification et configuration;
  • Répondre aux appels de service chez différents clients;
  • Effectuer les vérifications pré-opérationnelles en atelier;
  • Réaliser de l’entretien préventif en usine;
  • Préparer des rapports d’entretien et/ou rapports techniques;
  • Procéder à la calibration d’instruments;
  • Établir des diagnostics pour améliorer des systèmes ou résoudre des problématiques;
  • Installer et faire fonctionner des équipements standards et spécialisés;
  • Étalonner les composantes et les instruments électriques, selon les manuels techniques;
  • Agir en tant que spécialiste lors de la location de personnel;
  • Cerner et communiquer les problèmes techniques;
  • Respecter les consignes de santé et sécurité au travail;
  • Effectuer toutes autres tâches connexes.
EXIGENCES
  • Détenir un diplôme d’études collégiales en génie électrique, en électronique industrielle, une attestation d’études collégiales en automatisation industrielle ou toute autre formation et expérience équivalente;
  • 3 à 5 ans d’expérience dans un poste similaire;
  • Programmation d’automates et d’interfaces opérateurs;
  • Réseautique industrielle;
  • Avoir une bonne maîtrise du français et de l'anglais, parlé et écrit pour communiquer avec nos partenaires hors Québec;
  • Licence C hors construction;
  • Connaissance de la programmation Siemens;
  • ASP Construction;
  • Détenir un permis de conduire valide;
  • Être disponible pour se déplacer chez les clients;
  • Communication interpersonnelle;
  • Esprit d'analyse et d’organisation;
  • Flexibilité/adaptabilité (fonctionner avec facilité dans des environnements changeants);
  • Pensée technique;
  • Sens des responsabilités, rigueur et souci du détail;
  • Résoudre des problèmes;
  • Service à la clientèle;
  • Travail d’équipe.
Responsibilities
  • Participate in the execution of various automation projects;
  • Contribute to the design of automated systems;
  • Program all types of programmable logic controllers (PLCs) for different products, as well as operator interfaces (HMI);
  • Commission programmed systems at client sites: validate programming against client requirements, perform troubleshooting, modifications, and configurations;
  • Respond to service calls at various client locations;
  • Perform pre-operational checks in the workshop;
  • Carry out preventive maintenance in the plant;
  • Prepare maintenance and/or technical reports;
  • Calibrate instruments;
  • Diagnose and improve systems or resolve technical issues;
  • Install and operate standard and specialized equipment;
  • Calibrate electrical components and instruments according to technical manuals;
  • Act as a specialist during personnel rental assignments;
  • Identify and communicate technical problems;
  • Comply with health and safety guidelines at work;
  • Perform any other related tasks.
REQUIREMENTS
  • Hold a college diploma in electrical engineering, industrial electronics, an Attestation of College Studies (ACS) in industrial automation, or possess any equivalent combination of education and experience;
  • 3 to 5 years of experience in a similar position;
  • Programming of PLCs and operator interfaces;
  • Industrial networking;
  • Be fluent in French and English, both spoken and written, to communicate effectively with our partners outside of Quebec;
  • Hold a C license (non-construction);
  • Knowledge of Siemens programming;
  • ASP Construction certification;
  • Hold a valid driver’s license;
  • Be available to travel to client sites;
  • Exhibit strong interpersonal and oral communication skills;
  • Display organizational abilities;
  • Show adaptability and flexibility (ability to work effectively in changing situations);
  • Possess an analytical and technical mindset;
  • Demonstrate a sense of responsibility, rigor, and attention to detail;
  • Demonstrate strong problem-solving skills;
  • Exhibit a customer service mindset;
  • Work collaboratively and effectively within a team environment.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Ingénieur.e Instrumentation et contrôle - Instrumentation & Control Engineer (I&C Engineer)
Ingénieur.e Instrumentation et contrôle - Instrumentation & Control Engineer (I&C Engineer)

Excelpro • Montreal

On-site
CAD 90,000 - 115,000
Ingénieur.e Instrumentation et contrôle - Instrumentation & Control Engineer (I&C Engineer)
Ingénieur.e Instrumentation et contrôle - Instrumentation & Control Engineer (I&C Engineer)

Excelpro • Trois-Rivières

On-site
CAD 85,000 - 110,000
Chargé(e) de projets en automatisation
Chargé(e) de projets en automatisation

Laboratoires Confab Laboratories • Longueuil

On-site
CAD 85,000 - 115,000
Bonification annuelle
Assurances santé
PAA - programme d’aide
+7
Ingénieur.e Instrumentation et contrôle
Ingénieur.e Instrumentation et contrôle

ExcelPro • Montreal

On-site
CAD 80,000 - 120,000
Ingénieur.e Instrumentation et contrôle - Instrumentation & Control Engineer (I&C Engineer)
Ingénieur.e Instrumentation et contrôle - Instrumentation & Control Engineer (I&C Engineer)

Excelpro • Quebec

On-site
CAD 90,000 - 120,000
Ingénieur.e Instrumentation et contrôle
Ingénieur.e Instrumentation et contrôle

ExcelPro • Trois-Rivières

On-site
CAD 90,000 - 120,000
Ingénieur.e Instrumentation et contrôle
Ingénieur.e Instrumentation et contrôle

Excelpro Group • Montreal

On-site
CAD 85,000 - 110,000
Chargé(e) de projets en automatisation
Chargé(e) de projets en automatisation

Confab • Quebec

On-site
CAD 90,000 - 130,000
Bonification annuelle
Assurances santé et dentaires
Programme d'Aide aux Employés
+7
Ingénieur.e Instrumentation et contrôle
Ingénieur.e Instrumentation et contrôle

Excelpro Group • Trois-Rivières

On-site
CAD 80,000 - 110,000
Ingénieur.e Instrumentation et contrôle
Ingénieur.e Instrumentation et contrôle

Excelpro Group • Quebec

On-site
CAD 85,000 - 110,000