Senior Hardware System Engineer

VitalBio

Oakville

On-site

CAD 90,000 - 130,000

Full time

43 hours ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

VitalBio in Oakville, Ontario seeks a hands-on Senior Mechanical Engineer to own end-to-end subsystems for an electromechanical instrument. You will drive design from concept through CAD, prototyping, testing, documentation, and controlled release, coordinating with Electrical, Software, and Manufacturing teams.

You bring 5+ years of hardware experience, strong CAD (SolidWorks or Fusion 360), and proven ability to work with contract manufacturers, perform root-cause analysis, and push robust

Qualifications

  • Bachelor's degree in Mechanical Engineering or related field.
  • 5+ years of experience developing, integrating, or sustaining electromechanical hardware.
  • Strong 3D CAD skills and production-ready drawings.
  • Experience with contract manufacturers to resolve assembly and test issues.
  • Hands-on with test fixtures, DFM/DFA, tolerance analysis, and ECOs.
  • Demonstrated troubleshooting and cross-disciplinary collaboration.
  • Ability to work across mechanical, electrical, optics, software, and quality teams.
  • Regulated-product experience is an asset.

Responsibilities

  • Own mechanical design updates from concept through CAD and release.
  • Coordinate inputs from Electrical, Optics, Systems, and Manufacturing teams.
  • Develop assembly fixtures and drive process improvements for manufacturing repeatability.
  • Support transfer of subsystem manufacturing in-house and at external partners.
  • Investigate failures, perform root-cause analysis, and verify corrective actions.
  • Plan and execute reliability tests and design verification activities.

Skills

3D CAD
Root-cause analysis
Cross-functional collaboration
Systems thinking

Education

Bachelor's degree in Mechanical Engineering

Tools

SolidWorks
Fusion 360

Job description

About you:

You are a hands-on hardware engineer who takes end-to-end technical ownership of complex electromechanical subsystems. You combine strong mechanical design and CAD skills with a systems mindset, and you are equally comfortable troubleshooting production issues, supporting instrument integration, and driving cross-functional design improvements. You work proactively with contract manufacturers and internal engineering teams, bringing structure and urgency to root-cause investigations and following issues through to verified resolution. You understand that success means delivering a subsystem that performs reliably, can be manufactured and tested consistently, and is ready for verification, deployment, and continued improvement. You can shift fluidly between sustaining engineering, hands-on manufacturing support, and new design engineering as project needs evolve.

What you'll do:

This role spans several complementary areas of engineering ownership. The primary focus will shift as the product moves through development, manufacturing transfer, integration, V&V, and future improvements. We are looking for someone who can contribute strongly in each area, even though the balance of work will change over time.

Subsystem ownership, integration & V&V

  • Own the technical success and readiness of assigned hardware subsystems from late-stage development through manufacturing transfer, system integration, verification and validation (V&V), and subsequent product improvements.

  • Lead or execute subsystem changes/improvements ensuring mechanical, electrical, software, calibration, and system-level requirements are addressed.

  • Support integration of manufactured modules into the complete instrument; investigate failures, coordinate cross-disciplinary root-cause analysis, and verify the effectiveness of corrective actions.

  • Drive subsystem readiness for development milestones and V&V by supporting design verification, reliability testing, technical risk assessment, and the resolution of outstanding R&D issues.

Manufacturing support & transfer

  • Serve as a primary engineering point of contact for contract manufacturers; support builds, resolve assembly and test issues, and coordinate timely technical decisions and corrective actions.

  • Support the transfer, implementation, and ongoing operation of end-of-line (EOL) testing and calibration processes and equipment at external manufacturing partners.

  • Support and improve in-house calibration processes, including software capabilities for calibration tracking, updates, and traceability.

  • Support the transition of subsystem manufacturing in-house, including the design and build of fixtures, assembly and test process definition, work instructions, process flows, first-article qualification, and manufacturing readiness.

  • Develop assembly fixtures and implement process improvements that increase manufacturing repeatability, yield, efficiency, and ease of testing.

Design engineering & product improvements

  • Evaluate and implement next‑generation instrument design changes for cost, weight, manufacturability, reliability, lifetime, and serviceability, including changes to mechanical interfaces with an updated chassis.

  • Partner with Supply Chain to evaluate alternative components and suppliers, assessing technical fit, performance, risk, and qualification needs.

  • Own mechanical design updates from concept through CAD, prototyping, testing, documentation, design review, and controlled release; coordinate inputs from Electrical, Optics, Systems, Manufacturing, Design Transfer, Quality, and other teams.

Sustaining engineering, tools & reliability

  • Investigate and resolve ongoing manufacturing, assembly, calibration, and field‑relevant technical issues; drive engineering change orders arising from part availability, design corrections, documentation updates, and continuous improvement.

  • Support improvements to internal software tools and related manufacturing or calibration workflows in collaboration with software and manufacturing stakeholders.

  • Plan, execute, and analyze component lifetime and reliability experiments, including for LEDs, heaters, BLDC motors, and disc hubs; translate findings into design and qualification decisions.

What you'll need:
  • Bachelor's degree in Mechanical Engineering, Mechatronics, Systems Engineering, or a related discipline; equivalent practical experience considered.

  • Approximately 5+ years of relevant experience developing, integrating, or sustaining complex electromechanical hardware products.

  • Strong 3D CAD skills (e.g., SolidWorks or Fusion 360), with experience producing production‑ready mechanical designs, drawings, and controlled design documentation.

  • Experience working directly with contract manufacturers or production teams to resolve assembly, calibration, test, yield, and quality issues.

  • Hands‑on experience with test fixtures, manufacturing processes, design for manufacturing and assembly (DFM/DFA), tolerance analysis, and engineering change control.

  • Demonstrated troubleshooting and root‑cause analysis skills, with the ability to interpret test data, design experiments, and validate corrective actions.

  • Ability to work effectively across mechanical, electrical, optical, software, systems, supply chain, and quality disciplines without losing accountability for outcomes.

  • Experience supporting hardware through system integration, design verification, reliability testing, and manufacturing transfer; medical‑device or other regulated‑product experience is an asset.

  • Clear technical communication, sound engineering judgment, strong organizational skills, and a proactive ownership mindset.

  • Systems‑level understanding of how mechanical, electrical, optical, thermal, software, and calibration functions interact, with the judgment to assess design changes for unintended effects on instrument and analytical performance.

Compensation range: To be confirmed. Compensation will be determined based on the individual’s demonstrated experience, education, training, relevant certifications or licensure, and other applicable business and organizational factors.

This role is a current, onsite vacancy.

About Vital Bio

Vital is revolutionizing point-of-care diagnostics with our VitalOne platform, delivering real-time care wherever patients are. Our mission is to democratize health technology, making healthcare more accessible and proactive.

Our global team of experts spans chemistry, software, engineering, and microfluidics. We thrive on change, operate on trust, and value diverse perspectives. Our growth‑minded culture empowers front‑line decision‑making and fosters impactful work.

We seek tenacious, bold individuals ready to transform healthcare. At Vital, your talent will make a difference as we work to ensure everyone has access to care when and where they need it.


Vital Biosciences Inc. is an equal opportunity employer and values diversity in the workplace. We are therefore happy to accommodate any individual needs in keeping with the Ontario Human Rights Code and the Accessibility for Ontarians with Disabilities Act. If you require accommodation in order to participate in our hiring process, please contact us to make your needs known in advance

As part of our recruitment process, we may use automated or AI-supported tools to assist with application review and screening. These tools are used to support, not replace, human decision‑making. Final hiring decisions are always made by our hiring team.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Senior Engineer, Viking Design Transfer
Senior Engineer, Viking Design Transfer

Vital Bio • Oakville

On-site
CAD 130,000 - 155,000
Verification and Validation Engineer
Verification and Validation Engineer

VitalBio • Oakville

On-site
CAD 60,000 - 75,000
Manufacturing Engineer I
Manufacturing Engineer I

VITALBIO • Oakville

On-site
CAD 114,000 - 135,000
Verification and Validation Engineer
Verification and Validation Engineer

Vital Bio • Oakville

On-site
CAD 60,000 - 75,000
Senior Quality Management System (QMS) Quality Engineer
Senior Quality Management System (QMS) Quality Engineer

Vital Bio • Oakville

On-site
CAD 126,000 - 161,000
Principal Sourcing Lead
Principal Sourcing Lead

Vital Bio • Oakville

Hybrid
CAD 135,000 - 165,000
Manufacturing Technician I (6 month contract)
Manufacturing Technician I (6 month contract)

VitalBio • Oakville

On-site
CAD 28,000 - 34,000
Principal Sourcing Lead
Principal Sourcing Lead

VITALBIO • Oakville

Hybrid
CAD 135,000 - 165,000
Hybrid work arrangement
Senior Quality Management System (QMS) Quality Engineer
Senior Quality Management System (QMS) Quality Engineer

Vital Bio • Oakville

On-site
CAD 90,000 - 115,000
Manufacturing Engineer II
Manufacturing Engineer II

VITALBIO • Oakville

On-site
CAD 100,000 - 110,000