OPEN: Fire Protection Technical Staff

500-2370

Pickering

On-site

CAD 102,000 - 116,000

Full time

8 days ago

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

CPUS Engineering Staffing Solutions Inc. in Pickering, ON seeks a Fire Protection Technical Staff for a 24-month, 35-hour weekly, 100% onsite assignment. The role offers CAD 74–84 per hour and requires a four-year engineering degree or equivalent.

You will perform technical evaluations, prepare reports, review proposals, and coordinate with procurement to ensure compliance with CSA/N293/N393 and NFPA standards. English reporting is essential.

Qualifications

  • Requires knowledge of Fire Protection engineering and economics.
  • Requires knowledge of Fire Hazard Assessment and CSA/NFPA codes.
  • Requires proficient written and spoken English for clear reporting.
  • A four-year university engineering education or equivalent is normally required.

Responsibilities

  • Provide technical evaluations and coordinate commissioning, operation and maintenance across major work areas.
  • Receive assignments from Supervisor and identify problems or opportunities in the facility.
  • Prepare reports for external requests or historical records.
  • Initiate studies or investigations to identify opportunities for improvement.
  • Review proposals and discuss necessary changes with originator.
  • Recommend disposition of proposals to Supervisor for approval.
  • Prepare specifications for purchasing materials, services and equipment.
  • Coordinate with procurement and provide technical services during field installation.
  • Ensure compliance with CSA N293, CSA N393 and NFPA standards for fire protection.
  • Advise management on fire hazard assessment, PPE lifecycle and response equipment.
  • Ensure all fire protection systems are operational and compliant.
  • Develop/update standards, procedures, and guides to CNSC regulations and codes.
  • Assist Fire Protection Manager with risk assessments and Fire Safe Shutdown analyses.
  • Develop and update fire response plans for postulated scenarios.
  • Maintain processes to identify risk increases and update site protocols.
  • Collaborate with site managers to identify solutions for support needs.
  • Develop service delivery options to improve effectiveness.
  • Prepare CNSC correspondence and pursue corrective action plans.
  • Support interface with external fire protection and emergency groups.

Skills

Fire Protection
Fire Hazard Assessment
Fire Safe Showdown Assessment
National Building Code
National Fire Code
CSA N293
CSA N393
English proficiency

Education

Engineering degree (4-year)

Job description

Fire Protection Technical Staff

Resume Due Date: Monday, November 16, 2026 (5:00 PM EST)

Job ID: 26-110

Number of Vacancies: 1

Level: MP4

Duration: 24 months

Hours of work: 35 hours per week

Location: Pickering, ON

Work Mode: 100% onsite

Hourly Rate: $74-84

Key Accountabilities

Job Overview

  • Provide technical evaluations and advice, solve problems and coordinate technical work as required, in a number of major work areas, in support of the commissioning, operation and maintenance of the facilities.
  • Receive assignments from Supervisor as well as identify potential problems and opportunities in assigned areas and/or systems in the facility.
  • Prepare reports to provide information and data in answer to external requests or for historical purposes.
  • Initiate studies or investigations where opportunities for improvement are apparent. In some instances, these opportunities may be identified by the Supervisor.
  • Review proposals received from internal or external sources related to assigned area. Discuss proposal with originator as necessary to suggest changes or revisions as appropriate.
  • Recommend disposition of proposal to Supervisor in writing for review and forwarding to approval authority.
  • Prepare or help prepare specifications, for purchasing requisitions for material, services and equipment.
  • Follow up with procurement and provide necessary technical services during field installation.
  • Provide support for ensuring compliance with all site license conditions relating to CSA N293, CSA N393 and associated NFPA codes and standards related to the fire protection program.
  • Provide expert advice, guidance, direction and assistance to management and fire protection staff, regarding fire hazard assessment, fire response equipment lifecycle and fire response personal protective equipment and kit. Provide interpretations of station compliance requirements with licensing codes and standards (CSA N293, CSA N393, NFPA, NFCC), Provincial and Federal laws, acts, statues, and internal Fire Protection procedures.
  • Ensure all fire protection systems and equipment is operational and initiate appropriate compensatory measures to maintain compliance with regulations and station licence conditions where deficiencies exist.
  • Provide support in developing/ updating standards, procedure, Instruction and guides to ensure CNSC regulations, and code and standard requirements are adhered to.
  • Assist the Section Manager of Fire Protection Programs with fire risk assessments including review of pertinent system impairments, Fire Safe Shutdown Analysis and Fire Hazard Assessment information, official local information and fire codes and standards to identify credible alternative and performance based strategies for compliance with station licence conditions.
  • Develop response plans for postulated fire scenarios based on the plant safety report licensing basis.
  • Develop and maintain an ongoing review process to identify any increase in risk from equipment, training, staffing or procedural deficiencies and recommend the requirement to modify the site fire response protocols to compensate for changes in the site specific fire risk. Liaise with site department managers to identify solutions to their support needs.
  • Develop and implement Fire Protection service delivery options to improve effectiveness and efficiency of the service to internal stakeholders.
  • Ensure CNSC correspondence is prepared to an appropriate standard and that all recommendations, action notices or directives are appropriately addressed with corrective action plans.
  • Support the interface with external fire protection, and other emergency response groups, both internal and external.
Qualifications

Qualifications

  • Requires knowledge of Fire Protection, engineering and economics to technically understand the operation of the facility.
  • Requires knowledge of Fire Hazard Assessment, Fire Safe Showdown Assessment, National Building Code of Canada, National fire Code of Canada and CSA N293 to evaluate and propose improvements to Fire Protection processes, equipment and systems in Nuclear Stations and Facilities.
  • Requires a knowledge of English in order to prepare clear and concise reports and recommendations both verbally and in writing.
  • This knowledge is considered to be normally acquired through the successful completion of a four-year university education in an appropriate engineering field or by having the equivalent level of education.

Our client is dedicated to promoting employment equity and encourages applications from equity-seeking communities including but not limited to: Indigenous Peoples, racialized individuals, persons with disabilities, and women. Our client aims to build a diverse team that reflects the communities it serves, enhancing its ability to meet their needs. We are committed to an inclusive and accessible work environment and invites all qualified individuals to apply, offering accommodations during the application, interview and onboarding process as needed. This effort supports our client’s long-term strategy for equity, diversity, and inclusion.

CPUS Engineering employs artificial intelligence (AI) tools as part of its recruitment process to enhance efficiency and consistency. These tools may assist with activities such as application screening, candidate evaluation, and summarization of interview feedback.

AI-generated outputs are intended to supplement, not replace, human judgment. All final hiring decisions are made by qualified human decision-makers who exercise professional discretion in reviewing and assessing candidate information alongside any AI-generated insights.

CPUS Engineering ensures that the use of AI in recruitment complies with all applicable employment laws, human rights legislation, and privacy regulations. The organization is committed to maintaining fairness, transparency, and non-discrimination throughout the hiring process.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Senior Technical Engineer / Officer
Senior Technical Engineer / Officer

Cpus Engineering Staffing Solutions Inc. • Bowmanville

On-site
CAD 101,942 - 115,718
OPEN: Senior Technical Engineer / Officer
OPEN: Senior Technical Engineer / Officer

Cpus Engineering Staffing Solutions Inc. • Pickering

Hybrid
CAD 101,942 - 115,718
Senior Technical Officer/Engineer
Senior Technical Officer/Engineer

Cpus Engineering Staffing Solutions Inc. • Pickering

On-site
CAD 80,000 - 100,000
Assistant Technical Engineer
Assistant Technical Engineer

Cpus Engineering Staffing Solutions Inc. • Ottawa

On-site
CAD 75,000 - 95,000
26-110 Fire Protection Technical Staff
26-110 Fire Protection Technical Staff

Morson Group • Pickering

On-site
CAD 85,000 - 110,000
Fire Protection Technical Staff
Fire Protection Technical Staff

Spirit Omega Inc • Pickering

On-site
CAD 85,000 - 102,000
OPEN: Junior Technical Staff
OPEN: Junior Technical Staff

CPUS Engineering Staffing Solutions Inc. • Pickering

On-site
CAD 83,000 - 90,000
OPEN: Mechanical Engineer, Nuclear
OPEN: Mechanical Engineer, Nuclear

CPUS Engineering Staffing Solutions Inc. • Markham

Hybrid
CAD 135,000 - 166,000
OPEN: Assistant Project Lead
OPEN: Assistant Project Lead

CPUS Engineering Staffing Solutions Inc. • Pickering

On-site
CAD 83,000 - 90,000
Senior Fire Protection Engineer
Senior Fire Protection Engineer

Spirit Omega • Pickering

On-site
CAD 120,000 - 160,000