General Production (Coil Winder) - Evening Shift

Cam Tran; Amherst; On-site; CAD 34,000 - 41,000; Full time

Benefits offered by this job

Group Health Insurance

RRSP Program

Monthly Bonus

LEARN Program Opportunities

PPE Allowance

Opportunities to Advance within the Co

Employee Engagement Events

Job summary

Cam Tran in Amherst, NS is seeking a General Production Operator for the Winding department on evening/night shifts. This hands-on role involves winding coils, reading wiring diagrams, and assembling components that become part of distribution transformers.

You’ll work a fast-paced, safety-conscious environment with overtime potential; training is 6:00 AM–4:30 PM initially, followed by 4:30 PM–3:00 AM after training. Competitive wage and benefits accompany opportunities to advance.

Qualifications

• High Attention to Detail - verify accuracy of relevant information located on the coil sticker; tolerance must be +/3/8”
• Evaluating Information to Determine with Standards – use relevant information and judgement to meet coil specifications
• Inspecting Equipment or Material – inspect coil press quality and equipment status
• Manual Dexterity – handle wedges and inserts with care to avoid injury
• High Level of Accuracy - record bake cycle times and verify specifications
• Lifting and Pushing – move coils, plates, and wedges as part of tasks

Responsibilities

• Select coil-forming device for specified coil and fasten device onto machine mandrel
• Feeds strip through the machine and weld start leads onto the strip; wind strip to specified turn
• Feeds wire from reel through tension device, guides, and spreader; bend wire ends to form lead
• Turns setscrews to adjust tension on wire and reset counter
• Starts machine and manually feeds wire over coil core for even winding
• Observes counter and stops machine at target turns
• Wraps insulation between layers and around wound coil or inserts cooling ducts
• Cuts wire to form leads using cutters
• Pounds coil with hammer to shape windings
• Winds paper around the coil
• Solders leads and winds
• Stops machines to remove completed coils
• Other duties assigned by Value Stream Supervisor
• Ability to read technical drawings and schematics
• Strong attention to detail and teamwork

Skills

Attention to detail

Quality evaluation

Equipment inspection

Manual dexterity

Accuracy

Lifting & pushing

Tools

Hand tools

Job description

Position: General Production (Evening/Nights) - Winding

Number of openings: 1

Location: Amherst, NS (onsite)

Employment Type: Fulltime Permanent

Please note:May include overtime based on production needs.

About Cam Tran:

For more than 35 years, Cam Tran has been Canada’s largest full-line, Canadian-owned manufacturer of oil-filled distribution transformers. From coast to coast, our products help utilities deliver safe and reliable power to homes, businesses, and industries. As a company, we combine strong values with innovation, investing in our people and our technology so we can continue shaping the future of electrical distribution together.

About the Role:

This is more than a production job—it’s a chance to be part of something essential. Our General Production Operators work across multiple departments, learning to prep materials, operate machines, and assemble components that build high-quality transformer products. It’s hands-on, physical work where no two days feel the same, and you’ll see how your part fits into the bigger picture—helping power entire communities.

We are currently seeking a motivated General Production to join our Winding department. In this role, you will use coil-winding machines to wind coils used in distribution transformers. Coils are wound by reviewing wiring diagrams and work orders to select the specified wire type by length and circumference.

We’re looking for team players who value safety, consistency, and learning new things. If you’re always raising your hand to help or improve something, you’ll thrive here.

Responsibilities:

• Select coil-forming device for specified coil and fasten device onto machine mandrel
• Feeds strip through the machine and weld start leads onto the strip. Wind strip to specific turn and weld finish leads
• Feeds wire from reel through tension device, guides, and spreader, bends wire ends to form lead and attaches lead to coil core
• Turns setscrews to adjust tension on wire and sets the counter to zero
• Starts machine and manually feeds wire over coil core to obtain an even and uniform winding and shape of coil
• Observes counter and stops machine at a specified number of turns
• Wraps insulation between layers and around wound coil or inserts, cooling ducts
• Cuts wire to form leads, using wire or bolt cutters
• Pounds coil with hammer or mallet to shape end windings or remove coil from fixtures
• Winds paper around the coil
• Strips insulation from end of lead wires, threads lead wires through insulating sleeves or slide
• Sleeves over leads, and solders lead wires winding
• Stop machines to remove completed coils using hand tools
• Other duties assigned by Value Stream Supervisor
• Previous experience in a manufacturing or assembly role is preferred
• Ability to read and interpret technical drawings and schematics
• Strong attention to detail and commitment to quality
• Basic mechanical skills and familiarity with hand tools
• Ability to work in a fast-paced environment and adapt to changing priorities
• Good communication skills and teamwork capabilities
• Willingness to comply with safety regulations and practices

Qualifications:

• High Attention to Detail - verify accuracy of relevant information located on the sticker on the coil. You need to make sure the dimensions are as exact, with the tolerance only being +/3/8” or the coil will be no good
• Evaluating Information to Determine with Standards – Using relevant information and individual judgement to determine pack out of the coil with Masonite to meet the specifications
• Inspecting Equipment or Material: Inspecting equipment and the quality of the coil press
• Manual Dexterity – Paying close attention to when you are inserting a wedge that you are cautious to avoid injury to hands
• High Level of Accuracy - Record bake cycle times and verify the specifications as per the sticker.
• Lifting and Pushing – Coils, metal plates and wedges

Working Conditions:

• Working indoors
• Repetitive tasks
• High pace, pressure to perform to expectations
• Potential overtime hours

Physical Requirements:

• Ability to remain standing in a stationary position for extended periods.
• Capable of lifting and carrying items weighing up to 50 pounds.
• Able to perform moderate physical activities, including frequent handling and movement of materials, use of hands and arms, and operation and positioning of equipment.
• Frequent pushing and pulling of objects as part of daily tasks.

Shift and Flexibility:

• Training:Monday–Thursday,6:00 AM – 4:30 PM(10-hour shifts)
• Regular Schedule (after training):Monday–Thursday,4:30 PM – 3:00 AM(Afternoon Shift)
• Overtime:Fridays, based on business needs

We’re growing quickly, which means schedules may adjust as we expand. We’re looking for team members who bring flexibility, reliability, and a positive attitude — people who can adapt, collaborate, and keep projects moving forward.

Compensation Package:

• Competitive Wages starting at $24.95 - $29.88
• Group Health Insurance Benefit Plan and RRSP Program
• Monthly Bonus
• L.E.A.R.N Program Opportunities
• Personal Protective Equipment Allowance
• Opportunities to Advance within the Company
• Employee Engagement Events

A little fine print:

Cam Tran welcomes and encourages applications from people with disabilities. Accommodations are available on request for candidates participating in all aspects of the selection process.

Thank you in advance for your interest in this position. Please be advised that only those selected for an interview will be contacted.

This job is considered safety-sensitive because impairment by drugs or alcoholmay constitute a threat to health or
safety, and/or a lapse of attention could result in injury, illness, or death.

Central Moloney/CamTran may use HR technology tools within our applicant tracking system to help manage applications.