Electrical Design Engineer II

Mold-Masters Limited; Georgetown; On-site; CAD 75,000 - 95,000; Full time

Job summary

A leading global plastics company in Georgetown, Ontario, is seeking an Electrical Design Engineer II to provide technical expertise in designing electrical circuits and control systems. The successful candidate will engage in product design, testing, and collaborate with engineering teams. A professional degree in Electrical Engineering and relevant experience is essential for this full-time position, which offers opportunities for professional growth and development.

Qualifications

• Minimum five (5) years related experience or equivalent education.
• Ability to interpret and design engineering documents.

Responsibilities

• Design and build electrical circuits and control systems.
• Support testing, documentation, and system proposals.
• Coordinate activities for technical developments.

Skills

Experience with variable frequency drives

PLC programming

Strong mechanical aptitude

Excellent communication skills

Ability to troubleshoot

Electromechanical systems knowledge

Education

University Degree in Electrical Engineering

Professional Engineer designation (P.Eng.)

Mechanical Design with AutoCad

Job description

Join to apply for the Electrical Design Engineer II role at Mold-Masters Limited

Join to apply for the Electrical Design Engineer II role at Mold-Masters Limited

1 Summary

The successful incumbent will provide technical expertise to design, develop and build electrical circuits and control systems for special machinery and equipment. They will be involved in technical studies, specification compliance matrix, technical proposal, product design, preparation of specifications and technical plans, product testing and certification with support from other Engineers. In this role, the Electrical Design Engineer will coordinate activities concerned with technical developments, scheduling and resolving engineering design and test problems

Summary

1 Summary

The successful incumbent will provide technical expertise to design, develop and build electrical circuits and control systems for special machinery and equipment. They will be involved in technical studies, specification compliance matrix, technical proposal, product design, preparation of specifications and technical plans, product testing and certification with support from other Engineers. In this role, the Electrical Design Engineer will coordinate activities concerned with technical developments, scheduling and resolving engineering design and test problems

Responsibilities

2 Key Duties and Responsibilities

Responsibilities include, but are not limited to :

• Minimum of 6 years of experience with variable frequency drives, servo drives, sensors, PLC programming, and HMI programming
• Experience with process instrumentation in an industrial environment
• Utilize troubleshooting methodology to identify root cause and apply appropriate corrective action to mitigate issue
• Strong mechanical aptitude and understanding of electromechanical systems
• Wire machines, debug control systems, and assist with builds
• Support testing, documentation, and system proposals
• Knowledge of designing for UL, NEC, CE, and NFPA compliance
• Ability to read and interpret engineering drawings and 3D solid models
• Power distribution, I / O devices, sensors, pneumatics, and industrial actuators
• Design control panels for machine and / or process controls including 480VAC motor / power distribution
• Identify and order electrical hardware as necessary to support projects
• Excellent communication and collaboration skills across engineering and production teams
• Design, develop, layout, test and troubleshoot electrical circuits and control systems;
• Construct, modify and improve electrical schematics and control systems utilizing complex electrical design techniques;
• Work from schematics, diagrams, sketches and oral instructions to construct experimental or prototype models to meet engineering requirements;
• Develop schematics, assembly drawings, parts lists, etc;
• Create Job Instruction Sheets for wiring diagrams and sub-assembly;
• Preview designs or specifications for completeness, accuracy, adequacy and compliance with company and / or customer requirements;
• Provide direction to Assemblers and Technicians, with advice from other Engineers;
• Test Jig to improve productivity;
• Provide expert advice / guidance / information directly to stakeholders to ensure effectiveness of service or goods in relation to the manufacturing process;
• Constantly scrutinize current methods and suggest improvement where possible;
• Provide troubleshooting guidance and / or training to associates;
• Make recommendations for productivity and / or method improvements;
• Ensure ISO guidelines are followed; follow Job Instruction Sheets and Tag Procedures etc;

Providing services and support to internal and external customers, suppliers

In this role, the incumbent will act as a technical liaison for manufacturing, installation, and operational testing for conformance to functional requirements and internal and external customer specifications. They will have daily contact with employees and external vendors to exchange information on electrical controls, equipment, products and systems for industrial applications.

Key resources : other people and / or capital and equipment

In this role, the incumbent will be responsible for conducting experimental tests and evaluating results. They will also determine the optimum design specifications, approaches and parameters.

Decision Making

In this role, the Electrical Design Engineer has extensive R&D experience that will allow them to design, draft and test aspects of electrical circuits and control systems. The incumbent of this role must be able to troubleshoot abstract concepts and provide solutions / calculations, as well as manage their workload on a daily basis.

Qualifications

3 Qualifications

Education and Experience

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The incumbent of this role must have a University Degree in Electrical Engineering, a Professional Engineer designation (P.Eng.), Mechanical Design with AutoCad and a minimum of five (5) years related experience and / or an equivalent of education and experience.

A strong attention to detail, ability to work in a fast-paced environment and excellent organizational skills are required. The incumbent must be capable of interpreting and designing documents such as policies and procedures, blueprints, operating and electrical diagrams, job instruction sheets and procedure manuals. The ability to write Research and Development reports and to communicate effectively with co-workers and management is a requirement. Expert mathematical capabilities, including fundamentals of plane, solid geometry and trigonometry are necessary. A mechanical aptitude, ability to apply common sense and problem solve involving unknown variables in non-standardized situations is required.

Other required level of technical and / or practical judgment to perform the work :

Conducts original research, analyzes problems with equipment (hardware and software), and generates documentation for submission to the appropriate party; contacts outside resources for input into resolving problems, and applies corrective action; evaluates processes to determine their appropriateness and compatibility to company goals; and summarizes and reports recommendations to management.

The incumbent in this role will be in the Production Plant. The noise level in the work environment is usually minimal to moderate. Safety boots, hearing protection and eye protection is required.

Who We Are

Mold-Masters is a global leader in the plastics industry. We design, manufacture, distribute, sell and service highly engineered and customized plastic processing equipment and systems. Our hot runners, temperature controllers, auxiliary injection and co-injection systems are utilized by customers of all sizes in every industry, from small local manufacturers to large worldwide OEM manufacturers of the most widely recognized brands. Over the course of our 50+ year history, we've built our reputation on delivering the best performance through our broad range of innovative technologies that optimize production to enhance molded part quality, increase productivity and lower part cost. Unlock your operations' full potential with Mold-Masters. Mold-Masters is an Operating Company of Hillenbrand.

Hillenbrand (NYSE : HI) is a global industrial company that provides highly-engineered, mission-critical processing equipment and solutions to customers in over 100 countries around the world. Our portfolio is composed of leading industrial brands that serve large, attractive end markets, including durable plastics, food, and recycling. Guided by our Purpose — Shape What Matters For Tomorrow — we pursue excellence, collaboration, and innovation to consistently shape solutions that best serve our associates, customers, communities, and other stakeholders. To learn more, visit : www.Hillenbrand.com.

EEO : The policy of Hillenbrand Inc. is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity / expression or veteran status. Additionally, Hillenbrand Inc. and our operating companies are committed to being an Equal Employment Opportunity (EEO) Employer and offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us at [e-mail] . In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. At Hillenbrand, everyone is welcome to apply and "Shape What Matters for Tomorrow".

Seniority level

Seniority level

Mid-Senior level

Employment type

Employment type

Full-time

Job function

Job function

Engineering and Information Technology

Plastics Manufacturing

Referrals increase your chances of interviewing at Mold-Masters Limited by 2x

Get notified about new Electrical Design Engineer jobs in Georgetown, Ontario, Canada .

Junior / Intermediate Instrumentation & Control (I&C) Designer

Greater Toronto Area, Canada $80,000 - $120,000 3 weeks ago

Intermediate / Senior Electrical Engineer

Intermediate / Senior Electrical Engineer

Engineering Technologist, Renewable Energy Programs (10971)

Intermediate / Senior Electrical Designer

Intermediate Electrical Engineer – Renewable Energy and E-Mobility

Electrical Engineer / Designer - Smart Safety and Logistics

CA$70,000.00

CA$90,000.00

3 weeks ago

85,000.00

130,000.00

3 weeks ago

Brampton, Ontario, Canada CA$90,000 - CA$100,000 7 hours ago

Electrical Engineering Designer - Transformers

Senior Mechanical and Electrical Engineer - R&D

Electrical Design Engineer - Power Transformers

Senior Electrical Engineer / Technologist

Senior Electrical Engineer – Substations

We’re unlocking community knowledge in a new way. Experts add insights directly into each article, started with the help of AI.

J-18808-Ljbffr

Create a job alert for this search

Electrical Engineer • Georgetown, ON, Canada