Electrical & Controls Engineer

Celerity Craft

Squamish

On-site

CAD 70,000 - 110,000

Full time

12 days ago

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Celerity Craft, a Squamish-based technology company, develops the Dynamic Air Cushion Vehicle (DACV) and prototyping hardware for advanced marine propulsion systems.

We seek an Electrical & Controls Engineer to design, integrate and test electrical propulsion and control systems for DACV prototypes, from small RC models to crewed vessels, working with motors, drives, batteries and sensors. You will bridge electrical, mechanical and software domains in a hands-on environment.

Qualifications

  • Degree or diploma in Electrical/Mechatronics/Electronics engineering or related field.
  • Strong understanding of electrical circuits, motors, sensors, actuators and control systems.
  • Hands-on experience integrating, testing and troubleshooting electrical systems.
  • Familiarity with motors, ESCs, inverters and power electronics.
  • Ability to read electrical schematics and wiring diagrams.
  • Knowledge of PWM, CAN bus and UART.
  • Experience programming, scripting or implementing control logic.
  • Experience with test equipment and data acquisition.

Responsibilities

  • Design, assemble, integrate and troubleshoot electrical, electronic and control systems for DACV prototypes.
  • Select, integrate and test electric motors, motor controllers, ESCs/inverters, battery systems, power electronics, servos, actuators and sensors.
  • Develop electrical architectures for propulsion, power distribution, instrumentation and auxiliary systems.
  • Configure and customize flight controllers, autopilots and other control hardware for vessel applications.
  • Develop, implement and tune control algorithms, scripts and automated functions for propulsion and vessel control.
  • Design and integrate helm controls, operator interfaces and electronic control systems.
  • Work with communication interfaces and control signals including PWM, CAN bus and UART.
  • Configure telemetry, data acquisition, sensor monitoring and remote-control systems.
  • Integrate electrical protection, BMS interfaces, safety interlocks and emergency shutdown systems.
  • Prepare electrical schematics, wiring diagrams, component specifications and technical documentation.
  • Collaborate closely with mechanical engineers, vessel designers and suppliers.
  • Participate directly in prototype assembly, commissioning, troubleshooting and on-water testing.
  • Analyze test data and implement improvements to system performance, reliability and safety.

Skills

Electrical engineering
Control systems
Prototyping
Troubleshooting
Schematic reading

Education

Electrical/Mechatronics/Electronics engineering degree

Tools

Oscilloscopes
Multimeters
Data acquisition systems
Testing equipment

Job description

Celerity Craft is a Squamish-based technology company developing the Dynamic Air Cushion Vehicle (DACV), a next-generation marine platform designed to deliver faster, more efficient and lower-impact marine transportation.

We are building and testing increasingly capable prototypes as we advance the technology toward commercial applications.

About the Role

We are seeking a hands-on Electrical & Controls Engineer to support the design, development, integration and testing of electrical propulsion and control systems for our DACV prototypes, ranging from small remotely controlled models to larger crewed vessels.

You will work across electric motors, motor drives, power electronics, batteries, controllers, actuators, sensors and communication networks. This is a practical engineering role that involves taking systems from concept and component selection through design, assembly, integration, troubleshooting and real-world testing.

Key Responsibilities

  • Design, assemble, integrate and troubleshoot electrical, electronic and control systems for DACV prototypes.
  • Select, integrate and test electric motors, motor controllers, ESCs/inverters, battery systems, power electronics, servos, actuators and sensors.
  • Develop electrical architectures for propulsion, power distribution, instrumentation and auxiliary systems.
  • Configure and customize flight controllers, autopilots and other control hardware for vessel applications.
  • Develop, implement and tune control algorithms, scripts and automated functions for propulsion and vessel control.
  • Design and integrate helm controls, operator interfaces and electronic control systems.
  • Work with communication interfaces and control signals including PWM, CAN bus and UART.
  • Configure telemetry, data acquisition, sensor monitoring and remote-control systems.
  • Integrate electrical protection, BMS interfaces, safety interlocks and emergency shutdown systems.
  • Prepare electrical schematics, wiring diagrams, component specifications and technical documentation.
  • Collaborate closely with mechanical engineers, vessel designers and suppliers.
  • Participate directly in prototype assembly, commissioning, troubleshooting and on-water testing.
  • Analyze test data and implement improvements to system performance, reliability and safety.

Required Qualifications

  • Degree or diploma in Electrical Engineering, Mechatronics Engineering, Electronics Engineering or a related discipline, or equivalent demonstrated practical experience.
  • Strong understanding of electrical circuits, electronics, electric motors, motor drives, sensors, actuators and control systems.
  • Hands-on experience integrating, testing and troubleshooting electrical systems.
  • Familiarity with electric motors, motor controllers, ESCs, inverters and power electronics.
  • Understanding of communication protocols and control signals such as PWM, CAN bus and UART.
  • Experience with programming, scripting or implementing control logic.
  • Ability to read and develop electrical schematics and wiring diagrams.
  • Understanding of electrical power distribution, circuit protection and electrical safety.
  • Experience using test and diagnostic equipment such as multimeters, oscilloscopes and data acquisition systems.
  • Strong practical problem-solving skills and the ability to work independently in a prototype development environment.

Preferred Qualifications

  • Experience with ArduPilot, Mission Planner and Lua scripting.
  • Experience developing electrical or control systems for RC vehicles, UAVs, robotics or marine platforms.
  • Experience with electric vehicle or marine electric propulsion systems.
  • Familiarity with high-voltage DC systems, battery packs, battery management systems and associated safety practices.
  • Experience with telemetry, data acquisition, sensor integration and control-system tuning.
  • Experience with marine electrical systems, vessel instrumentation or industrial automation.
  • Experience commissioning and field-testing experimental systems.

What We're Looking For

We are looking for a practical, resourceful engineer who enjoys designing, building and testing real systems.

The ideal candidate is comfortable working across electrical engineering, electronics, software and mechanical systems. You should be able to investigate technical challenges, select appropriate components, implement solutions and troubleshoot problems as prototypes move from the workshop to real-world testing.

You do not need experience with every technology listed above. We value strong engineering fundamentals, hands-on ability, adaptability and a willingness to learn.

This is an opportunity to contribute directly to the development of a new marine technology while working closely with a small engineering team and seeing your work progress from initial concept through prototype development and on-water testing.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Electronics Engineer
Electronics Engineer

Celerity Craft • Squamish

Hybrid
CAD 85,000 - 125,000
Equity stake
Hybrid work options
Outdoor lifestyle location
Mechatronics Engineer
Mechatronics Engineer

Celerity Craft • Squamish

Hybrid
CAD 80,000 - 110,000
Competitive compensation
Equity in the company
Collaborative team environment
Mechanical Designer
Mechanical Designer

Celerity Craft • Squamish

On-site
CAD 70,000 - 110,000
Composites Fabricator / Finisher
Composites Fabricator / Finisher

Celerity Craft • Squamish

On-site
CAD 60,000 - 85,000
Competitive salary
Groundbreaking marine technology
Hands-on role with impact
+2
Composites Technician
Composites Technician

Celerity Craft • Squamish

On-site
CAD 65,000 - 90,000
Novel amphibious vessels project
Process development opportunities
Competitive compensation
+1
Senior Electrical Engineer
Senior Electrical Engineer

Kraken Robotics • Dartmouth

On-site
CAD 85,000 - 120,000
Electrical Engineer / Senior Electrical Engineer
Electrical Engineer / Senior Electrical Engineer

Impossible Metals • Collingwood

On-site
CAD 90,000 - 130,000
Stock options in this early-stage公司
Four weeks of vacation
Flexible hours
+2
Mechanical Engineering Designer / 3D CAD Drafting Specialist
Mechanical Engineering Designer / 3D CAD Drafting Specialist

Voltari Electric Inc. • Merrickville-Wolford

On-site
CAD 75,000 - 105,000
Senior Electrical Engineer
Senior Electrical Engineer

Ultra Electronics Group • Dartmouth

On-site
CAD 90,000 - 120,000
Extended health and dental
Life insurance
RRSP
+4
Senior Electrical Designer
Senior Electrical Designer

ABCDMI • New Brunswick

On-site
CAD 85,000 - 105,000