Electrical and Avionics Engineer

Skymark Aerospace

Toronto

On-site

CAD 85,000 - 120,000

Full time

5 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Skymark Aerospace seeks an Electrical and Avionics Engineer to design, integrate, and test UAV electrical systems. You will develop power distribution, avionic interfaces, select components, and help bring designs from prototype to flight.

You will balance power, weight, noise, reliability, and serviceability while documenting assumptions, test results, and changes for repeatable builds across aircraft configurations.

Qualifications

  • Bachelor's degree in Electrical Engineering, Electronics Engineering, Mechatronics Engineering, or closely related field.
  • Demonstrated experience developing and testing electrical or electronic hardware, including practical assembly or system integration.
  • Strong understanding of DC power systems, circuit protection, analog and digital electronics, grounding and shielding practices.
  • Experience producing electrical schematics and wiring documentation using an electrical CAD or electronics design platform.
  • Confidence using multimeters, oscilloscopes, power supplies, and other bench equipment to diagnose and verify hardware.
  • Familiarity with embedded hardware interfaces such as CAN, UART, I2C, SPI, or Ethernet, and the ability to interpret component documentation.
  • Ability to explain technical decisions, maintain clear design/test records, and coordinate with hardware/software teams.
  • UAV avionics, aerospace systems, robotics, or other mobile platforms with constrained power/weight.
  • Battery management, electric propulsion, DC converters, or electrical integration of fuel-cell systems.
  • Custom circuit board design, board bring-up, microcontrollers, or collaboration with embedded software developers.
  • EMI/EMC testing, environmental testing, or investigating intermittent electrical faults.
  • Professional engineering registration or progress toward registration.

Responsibilities

  • Design aircraft power distribution, voltage conversion, protection circuits, and electrical interfaces.
  • Create and maintain electrical schematics, wiring diagrams, harness drawings, connector pinouts, and BOMs.
  • Develop power budgets and assess loads, voltage drop and component ratings.
  • Integrate flight controllers, sensors, onboard computers, comms equipment, and payload electronics.
  • Integrate batteries, motor controllers, and power equipment; coordinate fuel-cell electrical interfaces as needed.
  • Specify wiring, connectors, grounding, shielding, and equipment placement for safe operation.
  • Support harness fabrication, prototype assembly, and bench testing; troubleshoot faults.
  • Develop electrical test procedures and setups; support ground and flight testing; analyze measurements.
  • Document design assumptions, interface requirements, test results, and changes for reviews.

Skills

Electrical hardware experience
DC power systems
Schematic and wiring documentation
Multimeters / oscilloscopes usage
Embedded interfaces CAN UART I2C SPI
Ability to explain technical decisions

Education

Bachelor's degree in Electrical / Electronics / Mechatronics

Tools

Electrical CAD software
Multimeters
Oscilloscopes
Power supplies

Job description

Skymark Aerospace develops uncrewed aircraft systems, with projects spanning aircraft platforms, propulsion integration, and onboard sensing technologies.

Our engineering work brings mechanical, electrical, and software disciplines together to develop and test practical UAV systems.

We are seeking an Electrical and Avionics Engineer to support the design, integration, and testing of UAV electrical systems.

You will develop power distribution and avionics interfaces, select components, and take designs through prototype assembly and validation alongside engineers, technicians, pilots, and external specialists.

The role combines electrical design with hands-on integration and troubleshooting. You will help balance power demand, weight, electrical noise, reliability, and serviceability while maintaining the documentation needed to assemble, test, and improve each aircraft configuration.

  • 01 Design aircraft power distribution, voltage conversion, protection circuits, and electrical interfaces to meet project requirements.
  • 02 Create and maintain electrical schematics, wiring diagrams, harness drawings, connector pinouts, and bills of materials.
  • 03 Develop power budgets and assess continuous, peak, and startup loads, voltage drop, and component ratings.
  • 04 Select and integrate flight controllers, sensors, onboard computers, communications equipment, and payload electronics with the relevant engineering teams.
  • 05 Integrate batteries, motor controllers, and other power equipment; coordinate fuel-cell electrical interfaces with propulsion specialists where applicable.
  • 06 Specify wiring, connectors, grounding, shielding, and equipment placement to support safe operation, electrical compatibility, and maintenance.
  • 07 Support harness fabrication, prototype assembly, and bench testing; troubleshoot power, signal, and hardware interface faults.
  • 08 Develop electrical test procedures and setups, support ground and flight testing, and analyse measurements to verify performance and resolve issues.
  • 09 Document design assumptions, interface requirements, test results, and engineering changes for technical reviews and repeatable builds.
  • 01 Bachelor's degree in Electrical Engineering, Electronics Engineering, Mechatronics Engineering, or a closely related engineering discipline.
  • 02 Demonstrated experience developing and testing electrical or electronic hardware, including practical assembly or system integration.
  • 03 Strong understanding of DC power systems, circuit protection, analog and digital electronics, and grounding and shielding practices.
  • 04 Experience producing electrical schematics and wiring documentation using an electrical CAD or electronics design platform.
  • 05 Confidence using multimeters, oscilloscopes, power supplies, and other bench equipment to diagnose and verify hardware.
  • 06 Familiarity with embedded hardware interfaces such as CAN, UART, I2C, SPI, or Ethernet, and the ability to interpret component documentation.
  • 07 Ability to explain technical decisions, maintain clear design and test records, and coordinate work with mechanical and software teams.
  • 01 UAV avionics, aerospace systems, robotics, or other mobile platforms with constrained power and weight.
  • 02 Battery management, electric propulsion, DC converters, or electrical integration of fuel-cell systems.
  • 03 Custom circuit board design, board bring-up, microcontrollers, or collaboration with embedded software developers.
  • 04 Electromagnetic interference and compatibility testing, environmental testing, or investigation of intermittent electrical faults.
  • 05 Professional engineering registration or progress toward registration.

You will help turn electrical designs into functioning aircraft systems and use build and test feedback to improve reliability.

The position offers involvement from component selection through integrated testing, with close collaboration across hardware, software, and flight operations.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

UAV Systems Integration Engineer
UAV Systems Integration Engineer

Skymark Aerospace • Toronto

On-site
CAD 90,000 - 120,000
Mechanical Engineer
Mechanical Engineer

Skymark Aerospace • Toronto

On-site
CAD 80,000 - 110,000
Embedded Software and Flight Controls Engineer
Embedded Software and Flight Controls Engineer

Skymark Aerospace • Toronto

On-site
CAD 90,000 - 130,000
Manufacturing and Production Engineer
Manufacturing and Production Engineer

Skymark Aerospace • Toronto

On-site
CAD 70,000 - 110,000
UAV Assembly and Electronics Technician
UAV Assembly and Electronics Technician

Web4You Inc. • Mississauga

On-site
CAD 55,000 - 75,000
Electronic and Firmware Engineer
Electronic and Firmware Engineer

MOSTAVIO • Toronto

On-site
CAD 80,000 - 100,000
Work on cutting-edge technology
Collaborative team environment
Growth opportunity in a fast-growing company
Senior Mechatronics Engineer
Senior Mechatronics Engineer

Kyte Dynamics | Aerial Robotics Co. • Canada

Hybrid
CAD 120,000 - 180,000
Health, dental, and vision insurance
Opportunity to work on state-of-the‑of
Aerial robotics innovation environment
B2 Licensed Aircraft Engineer
B2 Licensed Aircraft Engineer

TSMG Holding • Vancouver

On-site
CAD 90,000 - 130,000
Professional Senior, Engineering - Electrical Systems Integration
Professional Senior, Engineering - Electrical Systems Integration

Bombardier • Dorval

Hybrid
CAD 90,000 - 130,000
Dental & Medical
Retirement Plan
Employee Assistance Program
+1
Electrical Engineering Internship - Winter/Spring 2027 (Early Interest)
Electrical Engineering Internship - Winter/Spring 2027 (Early Interest)

Pyka • Alameda

On-site
CAD 72,000 - 82,000
Health insurance
Dental insurance
Vision insurance
+8