Coating/Painting & Welding Inspector

SGS

Toronto

On-site

CAD 69,000 - 76,000

Part time

14 days+

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

SGS is seeking an independent Coating/Painting & Welding Inspector for a two-year subcontractor agreement. The role is intermittent and on-demand, with an hourly rate of $50–$55. The inspector will monitor surface prep and coating applications, lead in field and shop environments, and ensure compliance with SSPC/NACE standards.

Travel expenses are covered when needed and overnight stays occur. The ideal candidate has NACE Level 2 and CWB Level 2 certifications, at least seven years of

Qualifications

  • Must hold NACE Level 2 and CWB Level 2 certifications.
  • Minimum seven years coating, painting and welding inspections experience.
  • At least three years in QA/vendor surveillance or shop inspections.
  • Experience inspecting pressure vessels, heat exchangers and piping components.

Responsibilities

  • Monitor surface preparation and coating applications across substrates.
  • Inspect coatings in shops and field environments (oil and gas, petrochemical, marine).
  • Evaluate surface cleanliness and SSPC/NACE standards (SP1-SP15).
  • Witness NDE testing (UT, PT, MT, RT) and verify reports.
  • Prepare detailed inspection reports and addressing non-conformities.

Skills

NACE Level 2
CWB Level 2
Seven years exp
Shop inspections

Job description

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for quality and integrity. Our 98,000 employees operate a network of 2,650 offices and laboratories, working together to enable a better, safer and more interconnected world.

Job Description

SGS is looking to hire Coating/Painting & Welding Inspector as independent contractors for various contracts. It is not full time work and we contact you when we have a request for work.

  • Position: Coating/Painting & Welding Inspector
  • Contract: Two-year subcontractor agreement
  • Schedule: Intermittent, as and where required-not a confirmed full-time schedule
  • Salary: $50 to $55/hr
  • Required certifications: NACE Level 2 and CWB Level 2
  • Experience: Minimum seven years, including three years in quality assurance, vendor surveillance or shop inspections
  • Travel expenses: Covered at cost when the inspection site is beyond a 200 km round trip from the inspector's residence and requires an overnight hotel stay, subject to prior client approval

Scope of work:

  • Responsible for monitoring advanced surface preparation and protective coating applications across steel, concrete, and other substrates
  • Undertake coating inspections in fixed coating facilities (shops) as well as complex industrial field environments (oil and gas, petrochemical, refining, marine, and bridge structures)
  • Inspect surface cleanliness and profiles using industry standards (such as SSPC/NACE surface standards SSPC-SP1 through SP15 and tape test profiles)
  • Inspect specialized application methods and systems, including pipeline coatings, sheet linings, brick/tile linings, spray metallizing, hot-dip galvanizing, and automated application (dip, roller, flood, coil coating)
  • Evaluate specialized generic coating types such as passive fireproofing, anti-fouling coatings, high-heat systems, and temporary protectives.
  • Conduct root-cause coating failure analysis (blistering, delamination, rust-back, cathodic disbondment) and risk-based inspection assessments.
  • Responsible for inspecting, testing, and evaluating weld processes, welding, pressure vessels, heat exchangers, and related equipment to ensure compliance with applicable codes, safety standards, and regulatory requirements.
  • Material verification
  • Supervision of Dimensional checks
  • Collection & verification of documentation against ITP
  • Quality document reviews including WPS / PQR, assessment of quality, and issue reports or recommendations for corrective actions to ensure the safety and structural integrity of welded components
  • Inspecting welds, reviewing welding procedures, and conducting visual and dimensional inspections
  • Examining completed welds for size, quality, and conformance to standards.
  • Witness non-destructive testing (NDT) and interpret / verify results.
  • Witness & verify PWHT (if applicable) & pressure testing.
  • Visual inspection on the quality of welding and mechanical projects.
  • Prepare detailed reports documenting inspection results, including any issues found.
  • Observing welders and preheating procedures
  • Recording inspection results and any non-conformities
  • Investigating Non-Conformities i.e. identifying causes and assisting in corrective actions.
  • Ability to communicate effectively with welders, engineers, and other personnel
Qualifications
  • MUST NACE level 2, CWB level 2
  • Minimum of seven (7) years Coating / Painting & welding inspections experience.
  • Three (3) of these years should be in Quality Assurance / vendor surveillance / shop inspections
  • Industrial experience in Oil & gas / Power & Utility / Construction / Manufacturing, etc..
  • Inspection experience of pressure vessels, heat exchanger shells and channels, air coolers, metallic piping systems, piping components, and pressure relief devices, welded steel atmospheric storage tanks
  • Experienced in witnessing NDE test (UT, PT, MT, RT, etc..) and verifying test reports.
Additional Information

SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression and Indigenous status, or any other characteristics protected by law.

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required.

This job description should not be construed as an exhaustive statement of duties, responsibilities, or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time.

Accommodations are available on request for qualified candidates during each stage of the recruitment process.

Please note that candidates applying for Canadian job openings should be authorized to work in Canada.

By clicking the link above or any third-party link within this posting, you are leaving this site and going to a third-party website where the third-party website's terms and privacy policy apply

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Coating/Painting & Welding Inspector
Coating/Painting & Welding Inspector

SGS • Hamilton

On-site
CAD 69,000 - 76,000
Travel expenses covered
Elite Coating, Painting & Welding Inspector (Contract)
Elite Coating, Painting & Welding Inspector (Contract)

SGS • Hamilton

On-site
CAD 69,000 - 76,000
Travel expenses covered
Coating/Painting &am
Coating/Painting &am

Best Your Buy • Toronto

On-site
CAD 69,000 - 76,000
Mechanical / API Inspector - Contract
Mechanical / API Inspector - Contract

SGS • Regina

On-site
CAD 69,000 - 76,000
Travel expenses covered
Steel Structure and Coating Inspector
Steel Structure and Coating Inspector

SGS • Montreal

On-site
CAD 80,000 - 110,000
Bilingual Quality Assurance Inspector
Bilingual Quality Assurance Inspector

SGS • Montreal

On-site
CAD 70,000 - 90,000
Structural / Civil Inspector (Contract)
Structural / Civil Inspector (Contract)

SGS • Vancouver

On-site
CAD 103,000 - 124,000
Structural / Civil Inspector (Contract)
Structural / Civil Inspector (Contract)

SGS • Kelowna

Hybrid
CAD 103,000 - 124,000
Per diems (Shop)
Per diems (Site)
Structural / Civil Inspector (Contract)
Structural / Civil Inspector (Contract)

SGS • Calgary

On-site
CAD 76,000 - 124,000
Structural Inspector (Contract)
Structural Inspector (Contract)

SGS • Edmonton

On-site
CAD 76,000 - 124,000
Per diems (Shop)
Per diems (Site)