Industrialization Engineer

Sunrise Group

Namur

On-site

EUR 70,000 - 95,000

Full time

14 days+

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Sunrise Group is seeking a hands-on Industrialization/NPI expert to bring new sleep health diagnostics from R&D to production. You will design for manufacturing, define cost targets, and lead the industrialization of new products, including tooling, fixtures, and test equipment.

On-site collaboration with production, supply chain, and quality is required at least 3 days a week. You will drive pilot runs, manage transfers to production, and provide technical support to resolve yield and process

Qualifications

  • Master’s degree in engineering; experience matters more than the diploma.
  • 5+ years in industrialization / NPI in medtech, electronics or a similar sector.
  • Led a product from prototype to series production: DFM, process definition, pilot runs, transfer.

Responsibilities

  • Design for manufacturing: integrate cost, assembly, testability early in design.
  • Own design-to-cost: estimate unit cost and propose savings before design freeze.
  • Industrialize new products: define assembly processes, routings, tooling, fixtures, cycle times.
  • Define in-process controls and end-of-line testing with R&D; manage transitions with production.
  • Plan pilot runs and transfer to production; train operators and hand over to Production Manager.
  • Provide technical production support; analyze yield, drive continuous improvement and cost reduction.
  • Write technical specs for PCBAs, sub-assemblies, components, and test equipment; manage suppliers on technical matters.
  • Lead regulatory documentation involvement (IQ/OQ/PQ) and CAPA activities when needed.

Skills

Industrialization
NPI (New Product Introduction)
Medtech/electronics experience
DFM (design for manufacturing)
Process validation
Quality tools (PFMEA, control plans)
Supplier management
Test equipment design
Problem solving
Challenging R&D to shop floor

Education

Master’s degree in engineering (civil or industrial)

Tools

ISO 13485 knowledge
EU MDR knowledge
IQ/OQ/PQ experience

Job description

About Sunrise Group

Sunrise Group is building the future of sleep health by combining breakthrough technology with expert care. We started in 2015 with a straightforward idea: sleep diagnosis should happen in the comfort of your own home, not in a hospital. To make that possible, we created a first-of-its-kind chin sensor, carefully validated through clinical research, reviewed by leading sleep experts, and cleared by the FDA.

Since then, Sunrise Group has grown from a single innovation into a complete sleep health company. We now design advanced diagnostic and treatment solutions, and we deliver care directly to patients through Dreem Health, our digital sleep clinic. By serving patients in all 50 states with reimbursed care, we are making sleep treatment more accessible, more personal, and much simpler than it has ever been.

Your Opportunity

You’ll join the Medical Devices team , which takes our diagnostic and treatment devices from R&D to series production. You’ll work daily with production, supply chain, and quality.

Your mission: make R&D products manufacturable, testable, and economically viable, then run them through their first controlled series and hand them over to production.
After that, you stay the technical go-to person for product and process issues during the run.

Design for manufacturing

  • Bring manufacturing, assembly, testability, and cost constraints into early design phases, and challenge design choices on their industrial impact.
  • Own design-to-cost: estimate target unit cost (in-house assembly + purchased sub-assemblies) and propose savings before design freeze.

Industrialization

  • Lead the industrialization of new products and product changes: assembly processes and workstations, routings, tooling, fixtures, target cycle times.
  • Define in-process controls and end-of-line test equipment with R&D, from specification through development or sourcing to validation.
  • Manage version transitions with production and supply chain.

Pilot runs and transfer to production

  • Plan and run pilot and first series, tracking yields and analyzing defects. Define phase-exit and transfer criteria.
  • Train operators and formally hand each product over to the Production Manager.

Production support

  • Be production’s technical point of contact for recurring issues, yield drift, and process or design changes.
  • Provide cycle-time and yield data for capacity decisions, and drive continuous improvement and cost reduction.

Suppliers and industrial partners

  • Write technical specifications for PCBAs, sub-assemblies, specific components, and test equipment.
  • Act as technical point of contact for our EMS, mechanical, and packaging partners: design reviews, supplier DFM, quality issues, qualification (first articles, transfers, critical components, obsolescence).

Quality and regulatory

  • Create the manufacturing documentation for new products (routings, work instructions, control plans, DMR elements) within our ISO 13485 quality system.
  • Lead process and test equipment validation (IQ/OQ/PQ), and contribute to EU MDR, FDA, and UK MDR technical files and notified-body audits.
  • Take part in root-cause analyses and CAPAs, and handle design changes that affect manufacturing.
What You Bring
  • A master’s degree in engineering (civil or industrial engineering) or equivalent. Experience matters more than the diploma.
  • 5+ years in industrialization / NPI, in medtech, electronics, or a comparable industry.
  • At least one product taken all the way from prototype to series production: DFM, process definition, pilot runs, transfer to production.
  • Strong command of industrialization and quality tools: process validation, PFMEA, control plans, structured problem-solving.
  • Experience designing or specifying end-of-line test equipment for electronic products.
  • Ability to write technical specifications and manage suppliers on technical matters.
  • Comfort at the interface between design and production: you can challenge R&D and earn the trust of the shop floor.
  • Autonomy and pragmatism: you enjoy building what doesn’t exist yet.
  • Fluent French and English.
  • This is a hands‑on role: you’ll be on site at least 3 days a week.
What Makes You Stand Out
  • Experience in a regulated environment, ideally medical devices (ISO 13485, EU MDR, FDA)
  • Assembly of miniaturized electronics or wearables
  • Work with electronics manufacturing services (EMS) providers
  • Several product launches run in parallel
  • Hands‑on analysis of test and production data
About our Team

At Sunrise, we’re tackling real sleep health challenges that affect millions. We keep things clear and simple, value trust and collaboration, and lead with optimism and compassion. These are the values that guide everything we do. If you’re looking for the freedom to take ownership of your work, make an impact, and be part of a team where you can bring your ideas to life, Sunrise might just be the right fit.

Dreem Health / Sunrise is an Equal Opportunity Employer. We welcome people of all backgrounds and are committed to building a workplace where everyone feels included and respected. We do not tolerate discrimination or harassment of any kind.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Industrialization Engineer
Industrialization Engineer

Sunrise Group • Belgium

Hybrid
EUR 70,000 - 110,000
R&D Engineer
R&D Engineer

Sunrise Group • Namur

On-site
EUR 55,000 - 75,000
R&D Engineer
R&D Engineer

Sunrise Group • Belgium

Hybrid
EUR 48,000 - 72,000
Supply Chain & Procurement Manager
Supply Chain & Procurement Manager

Sunrise Group • Namen

Hybrid
EUR 70,000 - 80,000
Back-End Developer
Back-End Developer

Sunrise • Louvain-la-Neuve

Remote
EUR 70,000 - 100,000
Engineering Manager — Lead 6–10 Engineers in Digital Health
Engineering Manager — Lead 6–10 Engineers in Digital Health

Sunrise Group • Belgium

Remote
EUR 90,000 - 140,000
MedTech Industrialization Engineer: Prototype to Production
MedTech Industrialization Engineer: Prototype to Production

Sunrise Group • Belgium

Hybrid
EUR 70,000 - 110,000
Medical Device Development Manager
Medical Device Development Manager

Materialise • Vlaams-Brabant

On-site
EUR 90,000 - 130,000
Cloud Platform Engineer
Cloud Platform Engineer

Bloomlife • Brussel Hoofdstad

Hybrid
EUR 78,000 - 113,000
Stock options
Remote-friendly culture
Growth opportunities
Lifecycle Engineering Manager
Lifecycle Engineering Manager

NIPRO Corporation - Global • Antwerpen

On-site
EUR 90,000 - 130,000